jada855

Hello all maxtor has a tool called amset that controls the acoustics of your hard disk To use the tool you must use a windows boot disk and run the tool from a:/promt problem is i dont have a floppy drive any more but i have a usb cd-rw drive i was wondering is there anyway to get the command prompt on a cd-rw so i can run this tool thanx for any help links or tutorials would be great.

cool more free space

Does anyone have a hotmail or netscape email account. just wondering if anyone else basic account size has been upgraded to 250mb anyone else experience this

Hey all i am sure most of us have a linksys router. But today I noticed something while changing my password to the router. I noticed that the password i typed into the fileds was shown at the top of the internet explorer address field when i hit apply it looked like this "http://192.168.1.1/Gozila.cgi?syspassword=(example)1234&sysPasswordConfirm=1234&UPnP_Work=1&FactoryDefaults=0" can anyone who has a linksys router check and see if this is normal. I googled searched "Gozila" and it looks like a search engine the name Gozila in the internet explorer is what lead me to be curious If this is true and the router is supposed to work this way this could be away to let people view your password for the router if they could some how retrieve this information. Well if someone could check this out change your password on the router and hit apply when the router ask you to log back in look at the address bar and take a look at the information. Any help ideas appreaciated

Links are dead

I searched the boards all over and I can not find a tweak that I read on these forums I know I read it here. Some one had a tweak to disable simple file sharing inside of windows xp home to get the security tab like the one inside of windows xp pro its a registry tweak if anyone could point me to that forum post that would be great thanx

Hello all I was wondering is this some how possible. I have a linksys router yesterday I discovered that one of the ports that you connect your ether net cable to was broken but all other ports work fine. problem is I used to connect my laptop to the broken port to gain internet access. I have a Desktop pc in my room with 2 NIC cards and one onboard NIC one of the NIC cards is connected to the router for internet access. But I have two NIC's free i was wondering if it was some how possible to connect the laptop too the other free NIC's for internet access. Using internet connection sharing behind the router. I set up ICS on the connection connetecd behind the router but nothing happens when I plug the cable into either of the two remaining NIC's they both have the red "X" accross the icon but I can still get on the internet with the local area connection. Also is there a way to save you NIC's static IP configuration for example if you manually put the IP addresses and DNS in your self incase of a re-format any way to save this data any ideas!! thanx for any help

to anyone who come across this problem with newer printer models. here is the solution. Physically connect the printer to the windows 98 machine second install the software for the printer and print a test page next connect the printer physically back to the windows xp machine. Back on the 98 machine right click the name of the printer you just set up and get to the properties tab of the printer. In the ports or (details) section point the printer point to the share of the windows xp machine. and Viola it should work thanx to all who viewed and tried to help solve

hi all i have a usb drive and i wanted to make different icons for different folders on the usb disk. but when i take the usb drive to a different computer the icons i had preset for each folder have dissapered.i have the icons on the same hard disk in a folder so windows can find them but it does not. anyone have any idea how to do this so that my changed icons stay on the usb drive thanx for any help

Hey all. Here is the situation I have a home network setup to xp machines one windows 98 laptop. files and folders can be shared through all machines I can see each machine on the network. Got a new printer hp psc 1310 series can share between the two xp machines but when trying to add a network printer to the windows 98 machine I get the drivers box the hp psc 1310 series driver is no where listed. I went to hp's site and they had alternative drivers but not for my printer. I know about the properties box of the shared printer inside of windows xp where you can add additional drivers for a windows 98 based machine problem is I dont have a windows 98 disc. Anyone have any solutions or work arounds please point me in that direction. Any help greatly appreciated

My fault on the errors sorry. Well my cpu FSB is set to 166mhz my ram is ddr pc2100 at 266mhz. In my bios I have the option to increase the cpu FSB speed to 248 max but the system will not start with anything above 166mhz for the cpu FSB. I can leave the cpu FSB at 166 and over clock the ram to 333mhz but i still have the re-draw problem. I have attached and image to show you how the sp2 security screen opens when no other programs are open. Things I have tried turning off all the GUI effects inside windows xp even the themes and I still have this problem here is my detailed system specs. And I know its not the Service packs it even happens on the fresh install of windows xp. here are my system specs Motherboard:kt600 pro by albatron via chipset (latest drivers) Nvidia geforce mx400 64mb agp 4x card(latest drivers) pc2100 ddr ram 256mb 20gb hardisk 5400rpm(could this be the problem??) 2mb cache buffer Monitor IBM G70(even tried the resolution at 800x600 and a 100mhz refresh rate) I disabled the direct draw acceleration ( And to my suprise I saw some improvement) AMD athlonxp 2600+Barton core 512kb L2 cache Final theory could it be me because i built the systems everything seems to be running fine on the processor meaning I have a heatsync I used the thermal glue and the right fan speed. I think it just might be the ram I need to go ahead and get the pc2700 512mb of ram 256 is just not enough Its funny I play games like unreal 2003 just fine with great frame rates and high textures no problem. But I do experience a super re-draw problem after I quit the game my desktop will re-draw super slow after I quit a game I think it has something to do with the hard disk because when the light is in use on the front of the case is usally when the slow down of the windows comes into play but if anyone else has any solutions I am willing to try. I find it wierd because I thought I was the only one with this problem so I never mentioned it till i saw this post. I tried everything you recommended in the previous post. thanx for any help

Hey prathapml my cpu speed is a athlon 2600+or 1.92ghz are you saying to lower the processor speed in the bios to keep up with the memory. My FSB for the processor is 333mhz but I have pc2100 ram installed which has a 166mhz FSB so in the Bios my processorcpu host frequency speed reads 166mhz and the cpu clock ratio is set to 11.5. Are you saying to lower the cpu clock ratio to a lower speed so it will not be faster than the ram because I can lower the ram speed its set a 266mhz and can only go higher. . I dont think its the motherboard though because I had a celeron processor with onboard sis graphics card and that thing performed so slow 800mhz celeron. My kt600 pro motherboard is practically new but the window re-draw problem is old and has been doing it for ever I am out of ideas. Thanx for any help or reply. One last question will bringing down the cpu host frequency from its normal 11.5 down to something like 7.0 hurt the processor

Hello all. I was wondering does the firewall inside of Sp2 even work. Here is the problem. I went to apples web site the other day and I downloaded itunes got it installed and when I opened the program I noticed that there were alot of people sharing music under the shared music tab pane. I was baffeled litteraly Gigabytes of songs being shared over my network heck i dont even know if it was my network. Before SP2 I would share music with itunes locally behind my router which was fine because there are only 2 computers in my home network. So I dugg around the winxpSp2 firewall settings told it not to allow itunes internet access and when i opened itunes the shared music was still available and i could still access the music store even though i told Sp2 firewall to block it. So I dugg around again in the change scope options set it to my network and subnet only and this did not work either did the last option and manually put in my 192.168etc information this did not work either. i have a static IP from my ISP so in the router settings I even changed all the subnet mask and default gateways on the router itself and all NIC cards that connect from the local area network computers. I then turned the xpSp2 firewall off and installed ZoneAlarm 5.0 on both machines I was then able to share music locally with out seeing any extra names under the shared music pane. I am hard wired and not wireless. Something I just remembered my friend brought a mac and a linksys router(same as I Have BEFSR41) and after we connected to the internet her itunes on the mac was full of users under the shared pane also and she has no network just a single mac any one having this happen maybe a flaw and itunes if a screen shot is needed I will provide But until i get a solution my shared music option is turned off which sucks cause I cant even share locally in my network

I have been having a window drawing problem for some time now. I have a kt600 pro mother board with a AGP 4X 64mb nvidia geforce2 mx 400 and I thought this would not happen once i got and AGP card I used to have a on board video system and it was not the best. But it still does re-draw slow and I just used a regular windows xp upgrade cd with and sp2 cd I got from microsoft. And still the same problem. It mostly occurs when the system is doing to much like if I am burning a cd then I try to open up my computer and then the control panel I will see the top part of the window with nothing in the center and then the icons and backgoround will fill in. I have and Athlonxp2600+(Barton Core) its wierd because I have a laptop pentium 3 running windows 98 witha 16mb graphics card and this never happens. Maybe its the athlon processor. I dont know it bothers me but I got used to it but if there is a solution please let me know I have the latest direct x, Nvidia display driver and the latest via chipset

Hello all I was wondering if there was a way to make all of your user's in your Local Area Network log in with a password everytime to join the network and use internet access and file sharing etc. All machines are using windows xp home sp2 And is there any software (hopefully free ware) so that I could see which users are logged on. thanx for any advice help