Jump to content

Kullenen_Ask

Member
  • Posts

    316
  • Joined

  • Last visited

  • Donations

    0.00 USD 
  • Country

    Turkey

Everything posted by Kullenen_Ask

  1. list of ALL extra files in system32 folder. can be missing or unneeded files. i didnt compared with else versions. you can select from them for to get avaliable networks to work acledit.dll actxprxy.dll aelupsvc.dll aepic.dll alg.exe AltTab.dll apphelp.dll appmgmts.dll AuxiliaryDisplayCpl.dll batmeter.dll brcoinst.dll browser.dll cacls.exe cfgbkend.dll CIRCoInst.dll clbcatq.dll COLORCNV.DLL colorcpl.exe colorui.dll comctl32.dll compmgmt.msc comsnap.dll comsvcs.dll connect.dll control.exe crtdll.dll cscapi.dll cscdll.dll cscui.dll d3d10_1.dll d3d10_1core.dll d3d8thk.dll d3d9.dll dccw.exe ddraw.dll desk.cpl DesktopWindowsMgmt.dll devcon.exe devenum.dll DeviceCenter.dll DeviceProperties.exe devmgmt.msc devmgr.dll DfsShlEx.dll dialer.exe DiskCmdr.exe DiskManagerAPIDLL.dll diskmgmt.msc Display.dll dmdlgs.dll dmdskmgr.dll dmdskres.dll dmdskres2.dll dmocx.dll dmutil.dll dmvdsitf.dll dmview.ocx dnsext.dll dnshc.dll docprop.dll dot3gpui.dll dot3hc.dll dot3ui.dll dwm.exe DWWIN.EXE ExplorerFrame.dll filemgmt.dll fmapi.dll fsmgmt.msc gatherNetworkInfo.vbs gatherwirelessinfo.vbs gatherwirelessinfo.xslt hdwwiz.cpl hdwwiz.exe hnetcfg.dll hotplug.dll icm32.dll icmui.dll IconCodecService.dll inetcpl.cpl intl.cpl iologmsg.dll IPBusEnum.dll IPBusEnumProxy.dll iphlpsvc.dll iprtprio.dll iprtrmgr.dll ipsecsnp.dll lanman.drv ListSvc.dll lltdres.dll lltdsvc.dll lusrmgr.msc Magnification.dll main.cpl mdminst.dll MediaMetadataHandler.dll mfc40.dll mfc40u.dll mmc.exe mmcbase.dll mmci.dll mmcico.dll mmcndmgr.dll mmcshext.dll modemui.dll mscms.dll mspaint.exe mstsc.exe mstscax.dll mycomput.dll mydocs.dll ndfapi.dll netapi.dll netcorehc.dll netdiagfx.dll netevent.dll netfxperf.dll netid.dll netplwiz.dll Netplwiz.exe netprof.dll netprofm.dll nettrace.dll networkitemfactory.dll npmproxy.dll nslookup.exe ntlanui2.dll objsel.dll pcasvc.dll PeerDistSh.dll PEShell.exe PEShell.ini PhotoMetadataHandler.dll pnrpauto.dll pnrpnsp.dll pnrpsvc.dll powercfg.cpl powercfg.exe powercpl.dll profprov.dll profsvc.dll provsvc.dll rasdial.exe rasgcw.dll RASMM.dll rasphone.exe rasplap.dll rpchttp.dll rpcnsh.dll RunLegacyCPLElevated.exe runonce.exe sccls.dll SearchFolder.dll Sens.dll sensrsvc.dll services.msc SessEnv.dll SetPageFile.exe shacct.dll share.exe shdocvw.dll SHELL.DLL shellstyle.dll shfolder.dll shgina.dll shrpubw.exe Shsvcs.dll srvsvc.dll sscore.dll ssdpapi.dll ssdpsrv.dll sti.dll sti_ci.dll stobject.dll StorSvc.dll StructuredQuery.dll syncui.dll sysdm.cpl system.drv systemcpl.dll SystemPropertiesAdvanced.exe SystemPropertiesComputerName.exe SystemPropertiesHardware.exe systray.exe tapi.dll tapilua.dll tapiperf.dll tapisrv.dll tapiui.dll taskbarcpl.dll tcpmon.dll tcpmonui.dll telephon.cpl themecpl.dll themeservice.dll themeui.dll thumbcache.dll timedate.cpl TsPnPRdrCoInstaller.dll umb.dll uniplat.dll upnphost.dll url.dll usbdr.dll usbmon.dll usbui.dll user.exe uxlib.dll uxlibres.dll uxsms.dll VAN.dll vga.drv WcsPlugInService.dll wdi.dll wiaservc.dll win.com WindowsCodecsExt.dll winethc.dll winpeshl.ini WINSOCK.DLL winusb.dll wlanapi.dll WLanHC.dll wlanhlp.dll wlaninst.dll WlanMM.dll wlanmsm.dll wlansec.dll wlansvc.dll wlanui.dll wlgpclnt.dll wpdbusenum.dll wpnpinst.exe WSDApi.dll wshqos.dll WUDFCoinstaller.dll WUDFHost.exe WUDFPlatform.dll WUDFSvc.dll WUDFx.dll Wwanadvui.dll WWanAPI.dll wwancfg.dll WWanHC.dll wwaninst.dll wwanmm.dll wwansvc.dll wwapi.dll i didnt add the list of other files like spool folder and in program files. but only with these i have working all in the picture in 182mb. also i have 3mb procmon and serviwin in it and 55 services working. with only adding dll files with looking from services regisry entries you can work all other services. also wwan working. if doesnt need can remove all its files. can change desktop wallpaper with selecting an image right click and set as wallpaper or from control panel. or change resolution from display control panel. doesnt change theme but there are themes in it also. only missing is i cant get network work fully. probably because it can not decide the rules for home or public networking. some registry missing. tonight i have seen first that it can change user too. i didnt try before i post here. it doesnt close session. when change user system user stays open and i think it makes conflicts and administrator doesnt have rights to install drivers or run sidebar(probably same time system user running sidebar too) it is not looks possible with working reg files because of ownerships. also i understood that adding all packages have disadvantages then the advantages. if add pppoe and wireless packages it adds also winsxs folders and gets wim bigger. also for them to work need configras and configdot3svc work at startup with wpeutil initialize network. if add only nearly 10 files in cab package to system32 folder and import telephony registry keys into hives rasman rasauto sstpsvc works more smooth. same for dot3svc package. but wmi and hta package need i think. isn't there improvement about en-us strings in add files txt files for different languages? need change them manually yet?
  2. The lines were made to find in both cases the hotfix. If it does not work for you, please tell me what is the solution to your problem. i know made for that but it doesn't find? can be difference with cmd file and autoit file? solution can be add that hotfix same as like the other packages. all are same kind. it can find others will find wireless too. Is autoit compiled version of Make_PE3.cmd? or it uses cmd file? are they same do same things in different ways? i didn't try to look solution i built without it. i want to change every file and make a modified version but i was scared when i see so many lines in cmd and so many works, maybe later when i feel myself enough consantrate. i didnt used it waik ever because everytime i decide to try it i had else version installed. i dont know why it didnt import clid.reg too i didnt change anything. only wanted to see what changed last one month. i made a small wim with sidebar, explorer, available networks, working network icon, possiblity to change screen resolution and wallpaper from control panel in 182mb wim will give the file list i added. but i couldnt get it take automatic ip. also i can give every registry key for desktop, sidebar and automatic working volume icon but they are very clear to see and will be lots of keys. i shared my experinces about hives with you but none of them used any from them. my services key works in every language wim and works with nearly all services and doesnt crash any if you dont have sys files too. over 60 services can work in 182mb wim. but they use lots of ram and maybe better like makepe3 this state. Your remaks about import of registry are certainly interesting. I need more study on how to use hives. Do you have more information or examples. it was a very short look by the time i wrote them. i made only one sample by myself too. can focus more and explain more how to use. but i am sure ownerships is a must for to development of such projects. Have you update your Port7PE project ? focused on embedded now. i added packages made winpe. but i saw that there isnt more changes and more options then i had until now with port7pe. Can you seen a video with WMP12? no i didnt. only works with irfanview. i can watch with it. execute a MSI files? i found an article and i believe the reason of nonworking msi is that. but couldnt get succeeded msi problem can be connection with this link Net Files ? there are .net packages in embedded. you can add them to install.wim compare the differences and add your winpe the files. ve access to change user in my pe, but when i change user (With StartMenu shortcut)i have no access to login screen; My PE become Busy... be sure you started needed services like sessionenv, seclogon ... need more users in HKEY_LOCAL_MACHINE\SOFTWARE_00\Microsoft\Windows NT\CurrentVersion\ProfileList\S-1-5-19 HKEY_LOCAL_MACHINE\SOFTWARE_00\Microsoft\Windows NT\CurrentVersion\ProfileList\S-1-5-20 HKEY_LOCAL_MACHINE\SOFTWARE_00\Microsoft\Windows NT\CurrentVersion\ProfileList\S-1-5-21-3149542145-3322839065-4058237693-500
  3. i see that there is IF NOT EXIST "%PETools%\%ARCH%\WinPE_OCs\Windows6.1-KB972831-x86.cab" ( IF NOT EXIST "%PETools%\%ARCH%\WinPE_FPs\Windows6.1-KB972831-x86.cab" ( lines in Make_PE3.cmd it is good and should fix but it couldn't find my wireless hotfix again is it only me that has that problem? it is in WinPE_FPs folder in there leak side of winpe builders is they all use reg load/import reg/reg unload. for a successful registry editing need to keep registry ownerships. such a registry adding will add keys as the current user.systernals PsExec or something like that can be used to import registry keys as system user but it is not enough too. a sample ownership in system network key i think the only way to solve it is working with registry hives. I want to hear your ideas about using hives else then using reg files??? want to give an example. i see that you changed the way of clid.reg importing at boot to importing directly to software hive. it is very good improvement(i saw lots of improvements in last build last one month).my clean,not any modified makepe_3 and english iso not boots any after it doesnt give any errors but i like the way your program works.it stays at command shell and doesnt load explorer shell. i investigated a little and saw it didnt load clid.reg. i looked to reg.exe command line options today and saw a "restore" option and made a little practice. forexample if we put PE3-SOFTWARE_CLID.hiv like PE3-SOFTWARE_CLID.reg and we run this commands in cmd file reg load HKLM\PE3-SOFTWARE "%PEWork%\mount\Windows\System32\config\SOFTWARE" >nul reg restore HKLM\PE3-SOFTWARE\Classes "%TP%\PE3_mod\PE3_reg\%ARCH%\PE3-SOFTWARE_CLID.hiv" >nul reg unload HKLM\PE3-SOFTWARE >nul is makes the same but also it keeps the ownerships (also classes hive has ownerships. i saw an example in a mediacenter key). using reg files are more easy to modify as txt files but using hive files more understandable at editing. i use a tool LOADHIVE.EXE loading hives making changes and unloading again. working in regedit makes editing more understandable then to work in txt file.
  4. i think this is the oobe screen off windows setup. if setup and oobe folders copied in windows folder in winpe it runs automaticaly. it looks good and makes boot colourful then normal gui. in normally it should be run at windows setup and when it finish starting services it should start oobe screen(all i know). in task manager writes as FirstUXWnd. how can we use it to start explorer.exe and close when it finish its job? can it be?
  5. i mistakely deleted the post. i downloaded windows 7 embedded. it is unbelievable and has everything we want default. also as packages. want work on it. you can find needed files list from its seperate packages for seperate feautures. Want to convert embedded install.wim(171mb) to a winpe.wim protecting the servicability as embedded so we can integrate any package. will be a new age in winpe environments if i succeed. what i try to do until now: *first i took install.wim of embedded. exported that as a boot image. mounted registry files. added winpe services (like fbwf) added ramdisk.sys and fbwf driver files and else drivers. i saw kernel dll files different size. changed them as winpe. compared and changed most of the registry values i know as winpe. tested in virtual machine. i have always process1_initialization failed error. after import services registry key of winpe complately when i boot after sliding frame of boot it gives PAGE_FAULT_IN_NONPAGED_AREA.looks like a service error but i also try same install.wim system hive on a untouched winpe.wim and it works. i couldnt succed. what will it give? it will give the option of integrate packages as install.wim to a winpe image. else dism dont integrate packages to winpe.wim *Another way. Took a winpe base image. changed config,servicing,winsxs/servicingstack,smi folders with the install.wim ones. if it can succeded we can return that folders to original ones and will have a winpe image with integrated packages.right files and right folders only without registry values.registry changes will lost but we can add by compare manually. after i had the wim and try to add packages it gave error at %75 of adding ie-explorer package. didnt try more, couldnt succeded too. *if none of them work? copying ds folder to a drive. changing install.wim with winpe.wim same name and using image manager on it works. you can select your packages and fix their dependencies.after use unchanged distribution folder with original install.wim. you can integrate your packages and compare folder structure with a untouched install.wim. copy the difference files to winpe.wim and manually add registry settings to your winpe.wim if anybody has more clever ideas i am ready to hear.
  6. Do I understand correctly that you've basically incorporated Microsoft DaRT 6.5 into your environment and are using its files to initialize networking? Answer:No. Dart tools netstart only a trigger to start wpeutil initialize network. it doesnt have any else functions.Dart tools is a must for to use winpe as a recovery environment. i want the tools in my builds. All tools size is 1.5mb zip file althought the Mdop 2009 R2 is 1.5gb
  7. last day i backed up my all builds and they took 3 dvds. probably have at least 20 different wims now working on mini and micro editions for people wants quick and fast boot. internet explorer, gadgets, and photoviewer standart options in both. in mini edition there will be more control panel options terminal and remote desktop services (services works but need find missing files for to get connect by remote) will be media player with mp3 and video support (only with irfanview) now. mini edition will be 235mb wim size. micro edition is now 176mb size i didnt decided what will be init more. both builds all drivers kept. also the ones probably will not need. forexample also in micro there is sound drivers but doesnt have sound files. can give the files list extra added upon demand. second image of the setup boot.wim used in both of them. really it has more options then to use a clean aik winpe.wim and add packages as i read from somewhere. cleaned setup packages and added dot3svc package and had a 145mb base wim. didnt add pppoe package because i can get it work easly without adding package by file additions and registry tweak. it doesnt need to load extra by configras.cmd and wpeutil initialize network switch. will get wpeutil process shorter. strange part i dont use any usb disk mounter tool but it can find usb drives automatically. i removed remountdrv tool from dart tools doesnt need anymore. it is probably from the right settings at software\microsoft\windows\explorer registry key (i think most important part of winpe builds, nobody has right settings yet)Other possibilities from wudf files or usb files. you can check from my files list and compare yours.
  8. i dont know what it inside autoit script of penetwork but it only works wpeutil initialize network command from my experiences after that loads wireless lan configurations from inf files. i explained in the topic and i think the best way is to use dart tools netstart if you dont want wait lots of minutes that wpeutil initializenetwork finish its job before the shell loads.Maybe somebody can find a way that command process silent after the shell loads. If i can get the run or runonce registry settings works(i couldnt) maybe it can be possible to put wpeutil initialize network command with a cmdow kind of stuff to there. As you can understand from the command switch (initializenetwork) probably it only installs network adaptors. if you have a working devicemanager when you select the computer icon in there and refresh it loads all the missing device drivers. It takes lots of time, ram and cpu usage.You can see 4 drvinst.exe process working same time in task manager.Better to install them manually by hand.in normal winpe you should have startnet.cmd in your system32 folder.you can put startnet.cmd line in wipeshl.ini as all the people do.in my builds i dont use penetwork to load my network driver. i get connected to internet automatically. wpeutil should be enough.if you added pppoe and dot3svc packages you will have configras and configdot3svc cmd files in your system32 folder. They works when the wpeutil initialize network. they loads inf files like the penetwork do. but also it is possible to get telephony,rasman,rasauto to work without using configras.cmd and probably same for wireless. until i find the way to load wlan service to start from services manager i will use penetwork to load it. if i dont need it anyway i will use it because i like the gui of it. just make a winpeshl.ini [LaunchApps] %windir%\system32\netstart.exe,-prompt Explorer.exe put NetStart.exe,MSDartCmn.dll files in system32 folder with mui files thats it. is it difficult? it should work configras and configdot3 cmd files silent at backgound (i have suspects but it should) if you add a pnputil or hwpnp inside one of that cmd files maybe it can work also them background and install your other drivers too. it is best way to work wpeutil silent. i searched much but other command window hiders doesnt work better then this way. they maybe can hide command windows(i cant say i succeded) but they wont let you start your shell before you wait lots of time wpeutil to finish its work. if you dont use -prompt switch it will not load the shell before the wpeutil command finish its work. maybe someone can find a way hexediting the netstart.exe to work as all prompts clicked "yes" without show prompts.
  9. some mediaplayer related file list.for to watch video and audio.i spend my all day with procmon they are really using. in program files folder only need wmplayer.exe and its mui. other files doesnt need. couldnt watch movie with media player but watched divx movie with irfanview after install xvid codec. mp3 files work nice with mediaplayer. also takes mp3 info from internet and when playing i see album photo. you should have right registry settings and audio support for it to work. rgb9rast mswmdm wmasf.dll wmnetmgr msdxm.tlb wmpdxm.dll msdxm.ocx msdmo.dll evr.dll resampledmo.dll mfds.dll DShowRdpFilter.dll wmpdxm.dll unregmp2 mf.dll wpc.dll mflat uniplat.dll WMASF.DLL wmp.dll wmpdxm.dll wmploc.DLL mmdevapi wdmaud.drv ksuser avrt audioses msacm32 msvfw32 midimap mciavi32 dciman32 winmm msgsm32.acm msacm32.dll l3codeca wmp.dll wmploc.dll dwmapi.dll wldap32.dll mmdevapi.dll mfplat.dll avrt.dll wmvcore.dll wmasf.dll windowscodecs.dll mf.dll atl.dll audiodg.exe evr.dll mp3dmod.dll msdmo.dll audioeng.dll audiokse.dll wmalfxgfxdsp.dll mfps.dll
  10. i have seen that you have working .net in your ludope?? i will not add all assembly folder. will leave it as it is. maybe i can add a few else folders for special applications. will check and try to solve msi problem with winbuilder script. i don't remember your or someone else it was saying msi and installshield support.msi service works but it can not reach i think. shouldnt be very difficult.i installed a setup program without problem. i don't know which application it was using installshield or else. i dont have else video then divx. i didnt try to use video can inform when i check. images seen by photoviewer not mediaplayer. you can see image size from videos but it is cd size not wim size. wim size should be 433 something like that. i dont think to optimize it. optimization deletes needed driver files. i will delete some big dll files without loosing functionality. will delete infocard and wellcome center dll also there is a sorting.nls which i don't now really needed.there are such big files. want it to be 399mb or 410mb. In 433mb there is winrar and irfanview(5mb with videoplugin). i understand that when i change user systemuser stay open as it should be. double user same time takes more ram usage when working administrator account. changing user takes much time. i remember the iso that shutdown work and i deleted it was chaging user in 4 seconds. it doesnt seen in second clip but synccenter and colormanagement working. i dont know why it did so in there.
  11. in action clip new build coming desktop wallpaper support. (From personalization and right click save as wallpaper support.) theme as system user. (trying to get aero work.) another clip (you will say i am a liar and this is a real windows 7 ) Notes: *I have seen that my system\productoptions has terminal server personal. i was know it need terminal server key for background support far before but i thought terminal server personal also should be same thing. I understood i was false. Changed it to terminal server and background works now. *Logged in as administrator (It is like real windows with everything.) backed up user hive and saved is a config\default hive (Every user uses same this hive.) Now i have blue classic theme. it means system can use theme support if there is aero.
  12. here is a small video. enough for me. i never said i will get all to work. solved background too. it can change from anywhere. services are most easy and fun to solve. others more difficult for me. can you share bitlocker registry settings too. i dont want to download all embedded for it. strange part is i removed [HKEY_LOCAL_MACHINE\SYSTEM_00\Setup] "CmdLine"="winpeshl.exe" with explorer.exe from registry but it boots we can make a customized win7 embedded with integrating packages and turn it to a windows 7 in such a condition will be a perfect winpe
  13. Do you have any ideas about shutdown button or autologon admin? my build nearly complete. nothing left to solve
  14. i didnt try to work in winpe. i work it in windows xp and get that error but i used a manifest from winsxs folder. i mean how will it be helpfull for to develop a winpe with a small example. how to use that registry that it gives to us. import offline image? can be a way to use for winsxs manifests? xml2reg.exe x86_microsoft-windows-vsswriters_31bf3856ad364e35_6.1.7600.16385_none_e3d4d0ce50f74247.manifest nothing happens. code syntax wrong?
  15. Thank you. I think it is works for windows 7 manifest files too? Only for cab package manifests or the ones in winsxs folder? If you can give an example usage for winpe environment i will be glad. I take Autoit Error L-1 Error:Array variable has incorrect number of subscripts or subscript dimension rage exceed. does it works in xp? what does it need to work? framework version or else?
  16. wooww. thanks for usefull info. i didnt know what a manifest file is it before you explain really. microsoft gives free trial with free shipping now. i registered. i think it will be avaliable rtm soon. i didnt download it yet. they send many mails about test builds but prefer rtm ones. it is strange they give package by package. i don't think they want people build their own customized operating system with their desired packages last minute. i succeded to work power options under system account. but shutdown button not works after it work yet. probably has connection with my new clid.reg for people that wants to make their own clid.reg. (UPDATED IN POST #71) 1-)take clid.reg from winbuilder scripts. (credits to it's founder) 2-)make needed changes wimb suggested (Replacing in clid.reg "all 43,00,3a,00,5c,00 were by 58,00,3a,00,5c,00" means that hexcode for C:\ is replaced by X:\ C is hex 43 and X is hex 58).) 3-)make firewall change i suggested in this topic (search) 4-)boot in winpe. load install wim classes hiv with a hiv mount tool. import modified clid.reg on it. with working in winpe environment it will give you system owners and you wont take a message some of keys are in use. 5-)remove runas interactive user keys. 6-)backup loaded classes hiv as hiv (for keep ownerships) 7-)also internet explorer ieproxy.dll register error solved like this 8-)i manually imported this classes hiv to my software\classes offline now i can see wallpapers in customization screen but i don't see wallpaper. also there is 2 explorer process in task manager. one is system other is administrator account. i don't know if it is normal. maybe when i log off it doesnt end system session. firewall mmc working. eventlog gives error 50. i think because it can not find right location for logs. also task scheduler says can not find data. probably that is same too. there is not enough information to solve vssadmin list writers. at bitlocker cpl i don't see any place to use it. does it automaticaly finds drives in there? or need to open an exe to get it work. i try to run bitlockerwizard from system32 folder nothing happens.
  17. java very big i don't want. i have seen only wmplayer.exe mui enough in program files folder. but other files in system32 are more and big files. you can add any mediaplayer,media, stuff from registry i integrated all system hive nearly same with setup.i have problems when i logon as admin now. explorer.exe working as system user. need start explorer.exe from taskmanager.i am working on it. ı made a new clid.reg, clean and full. i have power options in control panel too. also they work as administrator but they say can not connect to power options in system user. someone should find a trick to autologin admin. Trick: There is HKEY_LOCAL_MACHINE\SYSTEM\Setup\AllowStart\ProfSvc missing in winpe. i see that the services in here gets run when boot. you can add your services that you want to work else. Of course you should be sure that that service exist in your build and can run manually when you want. It has connection with change user and user profiles but it was working without it too
  18. i don't have wireless wireless card in my pc. i didn't test it too. you canuse wimb's makepe_3 from other topics in this forum. there are screenshots of working wireless. You can start reading from here for wlan service to work. you should at add pppoe and Windows6.1-KB972831-x86.cab to your winpe. you should get sstpsvc, ramsman, rasauto to work before you can succesfully enable wlan. i use penetwork to enable wireless yet. i can start wwansvc manually but i couldn't get wlansvc to work manually
  19. So you were able to get Windows Explorer to run in Windows PE? yes. it is not miracle. winbuilder and makepe_3 already has that function for long time before. Does it have the startmenu, backround and taskbar functionality? Background doesnt yet (only simple colours not photo support), others yes. And if so it was as simple as what you stated in your original post ... i think number 2? Simplicity can change with user experience. "I don't want the end result i want to understand how to get the end result" I am %100 same idea. i want to documentise as much as i can. sometimes so many changes and i don't also know exactly which change gives that functionality. It gets more complex day by day. Registry additions nearly comes to end. it should be small and bootable. dont want to add more files. It is not a windows 7 installed on a usb disk. It is a winpe that boots to ram.
  20. my log off gone now too. possible reason i think i added windows\policydefinitions and there is WinLogon.admx and Logon.admx. it means group policy settings works(i think so)Because i have seen somewhere in policy settings that system user was not in allowed users maybe can they be possible reason.Most of them Administrator has rights.If you don't want to use group policy you can delete all that folder. Also can be a connection with a file from wbem folder, after i turn it back i can say more clear info. I didnt try to install nvdia or ati driver but i can install general video driver. It is not installed by default. In my all builds from the first iso i built with winbuilder log off was working. But succesfull login need profsvc,seclogon,sessionenv. Paintnet is a buggy big program for this. First it wants more scrathspace to work (default32mb not enough it to exract files to temp folder). Second msi installer service couldnt find problem (need to solve). I found portable one and it gives me a usefull log for missing files. Login as administrator very difficult. i have needed settings but administrator must have a password and for it to have password need to edit sam hive. it seems difficult.
  21. GUIDE FOR MINIMUM SET OF FILES: 1-)Take a winpe.wim from OPK or AIK 2-)Take a vlited install.wim or normal install.wim from windows 7 3-)Mount both to different folders. 4-)Copy all files from install wim to winpe.wim. better not to overwrite. you can use scooter software beyond compare. *keep winpe.wim windows\system32\config windows\servicing windows\smi windows\winsxs servicing stack folders. as it is for dism to work 5-)Apply optimization txt over winpe.wim. Dism /image:C:\winpe_x86\mount /Apply-Profiles:C:\fa.txt 6-)Commit changes and don't forget to export for changes to effect Now you need config registry hives. Maybe can be guide 2 maybe not. You can use make_pe3 hives until that time. Most easy way to have a portable winpe win7
  22. you can pull the files and registry settings from audioV3_deramod.script. not much big 20mb i think. i will add my findings later. http://ludovici.winbuilder.net//VistaPE-Leopard/App/Windows/audioV3.script audioendpoint,audio,threadorder,mmcss works. only qwave not (does it need?if need i will get it work too) all drivers loaded but no sound. removed VIRTUALAUDIO.sys,virtualaudiodevice.inf i think gets crash my device manager. ramdisk.inf removed it loads and works and it freeze too i think. Edit: anyway solved thanks for help. only need to select device manager and install. automatically works everything. no need for extra program and registry editing i am on my own. Conclusion: added extra files from that script. most was i had didnt changed my iso size much. imported that system\enum\sw keys again imported all media...,mediaplayer,multimedia,audio settings from windows install.wim both for software and system hives *i didnt think to make this so complicated and sound. also if you add everything from first you can't know which makes it crash because of that i saw some keys left not added at system hive.they can be unneeded for sound but better have more if it works *don't forget to change d:\ to x:\ values if have *And last maybe the reason of it doesnt works after all drivers installed is i checked my keys owners and i saw most of them has me as owner. changed all to administrator again. It is main problem of manual editing need to keep it mind always. I think system cant change and add values when it install. my idea is that. new build with less size and more stuff. 407mb and can be less then 400 if some big dll files removed for example infocard. maybe we can get it work too. not time for remove. need solve images doesnt seen problem. can be seen from photo. cant see video. maybe because of it is divx. maybe can look to bitlocker and vss problems. never used in my life i don't know how they works.
  23. i get work nearly all services. maybe 15 or less left. themes only seen if you log off and login as administrator. i see that it boot with theme support at boot there is themes enabled until widows is customizing screen but when it logs on as system theme support gone. i am working on sounds now. i pulled enum\sw settings from your script. and added inf and sys files from audio script. sound drivers installs ok. creative, usb, stream proxy, stream quality manager,stream time proxy,stream T/receiver-to receiver. but it freeze when install driver sometimes. there is no drmaud service in win7. for sound support does it need to add it to services? i had research in your scripts. there are strange stuff, do you mix vista and win7 scripts? are there such manifests and winsxs folders in win7? want to share my experience that i had only add vc80 and vc90 sidebyside keys but i have seen it can use winsxs files and folders that doesn't exist sidebyside registry. i have seen it after i optimize. if it can use i don't want to add more to sidebyside if doesnt really need. all .net services works as service but i try to run a .net software from microsoft it is name is "fixit" for to solve windows 7 update and configuration problems. it is compressed soft and opens itself to temp folder and there is a autorun file in it and it gives an error and says a command line to run it autorun .. /manifest something like that. i have seen services and mmc snapins can work without need assembly\nativeimages folder. i kept only a few small folders in it for to keep it small. for full .net support need keep all i think. where did you find localized files? MFC90RUS.DLL? my autorun is error is same thing with this? You must have a script call "Standard-5-SideBySide.script" or "5 - VC++ 2008", you must select this script for DotNet working On Win7PE, you have SideBySide, but error to execute the autorun, check this post ERROR it doesnt find and load audio drivers at boot. they can manually load from device manager but it takes long time. is there any way to find wpeutil and load them at boot? How to check if .net running or not? if services running Ludo did you ever can hear sound with this plugin on win7 ever?
  24. New build coming with sidebar and mediaplayer(not works it says sound problem but it opens). will edit this post later. Want to make a need to keep important files section. Will give only name by name important files i suggest to keep. KEEP: searchfolder.dll (i thought need only for windows search that i don't want in my build but need for select change desktop wallpaper select) wmp.dll and wmploc.dll (big dll files but need for any mediaplayer if you can get them work or want muiltimedia support ) thanks for ludovici that i found missing registry entries for sidebar from vistape Feature.script. maybe can solve audio and mediaplayer from other scripts. For readers i suggest his winbuilder site and plugins. Group Policy editor works. How can i backup settings if i set from local policy editor for a winpe enviroment? Need backup registries or as admx file? Need info or link to read
  25. How to make a portable windows 7 I had an idea after some experiences. want to share here. 1-)Create a win7pe environment with explorer enabled. (can be with winbuilder or make_pe3) 2-)Find or make a vlited one cd size windows 7 setup. 3-)Copy all the files from vlited environment to win7pe environment. (without overrite anything). Now you will have a cd size big win7pe. 4-)Clean that win7pe from loaders and autostart stuff. (there should be only explorer.exe in winpeshl.ini) Until here it should be easy difficult part comes now about registry settings. You should combine my settings registry to your win7pe. Post #36 Full_registry_backup.reg 5-)To change all your registry hives you should be system account i think. One idea from me boot pc with win7pe (not with we done previously (if it works yet you can), with untouched working win7pe) Seperate HKLM\Software and HKLM\System ones to seperate reg files from my reg. Because of win7pe user is system maybe you can import all to your win7pe. After backup your config folder (X:\windows\system32\config). And use that hives in your portable7 6-)If you are lucky it should boot. If it is, only thing you should need to have a all windows is to add software\microsoft\sidebyside key from install wim. Open with a registry editor both hives. Copy win7pe winners to over install.wim winners. Then backup install.wim winners and change with win7pe winners. I didn't test it but teorically should work. My system nearly same. there should be genius and clever people out there. If anybody succed i want to congragulate him It is more easy then the way i had mixing onebyone every reg key. In previous posts we try to have every feature adding files and registry onebyone this is viceversa of it. having everything and after removing. You can remove and get it smaller. In every way you will need lots of ram.
×
×
  • Create New...