Bendfella

Thank u will try on monday,. And for nod32? Mbam, panda usb vaccine?

and this line comes in nlite addon maker?<br>

if u use nlite addon maker there are already programs and which switches to use. but its outdated. any chance of updating it/ i am still struggling to make an addon of my silent install office 2003. i just need to know what switch to use for my unattend.mst file no one is replying to my posts no one and i am getting frustrated

how do i make the addon, finish your tutorial

i ve just made my silent installation of nod32 following the tutorial in this forum using nlite addon maker, what is the command? qn/qb? coz u need to set username and password while installing or choose to setup parameters later or will it use my cfg.xml

ok. i managed to get the tutorial right to the end using this guide below and had it tested in vmare http://www.msfn.org/...file-for-nlite/ now i know i must put it in a folder eg . new folder then right click and use nlite addon maker but at the bottom, which silent parameter command do i use to make an addon or can i just use the makecab command??

ok. i managed to get the tutorial right to the end using this guide below and had it tested in vmare now i know i must put it in a folder eg . new folder then right click and use nlite addon maker but at the bottom, which silent parameter command do i use to make an addon or can i just use the makecab command??

i followed the whole tutorial from here however at the part where i have to shrink my source it gives lots of errors, i read somewhere its okay but i was just wondering coz my full source is 637mb just as it is in the tutorial but after shrinking the other are not the same. also i tried to compress it further with 7zip with the files provided in the tutorial. it works but i cannot get the last part right and that is to make an addon with with nlite addon maker can anyone just help me THERE and when done do i integrate it as i would do a normal addon in nlite???

thanks mate!

What method is easiest then to get office 2003 integrated

Is there a way i can see which version service pack of office 2003 i have on my cd? I know its office 2003 pro. Reason. I followed all the guides to make silent or addon. Whn i slipstream the updates it goes well a but whn using shrink lang it gives errors. Also dnt have clue how to use nlite addon maker for office. Tried and added in nlite but it neva installed in vmware!

i just wanted to check sumthing. when i double click on the last file created with copy /b 7zS.sfx + config.txt + Office2003.7z Office2003.exe it said @cannot find setup.exe why is it so **** hard to get office 2003 working with my unattended install

<font face="Comic Sans MS" size="4"> i tried to follow the guide to make an addon from here: <br><br></font><font face="Comic Sans MS" size="4">3) Place your reshacked 7zS.sfx in that same folder.<br> 4) Open a cmd prompt in c:\Office2003 and type:<br><br></font> <pre class="prettyprint"><font face="Comic Sans MS" size="4"><span class="pln">copy </span><span class="pun">/</span><span class="pln">b </span><span class="lit">7zS</span><span class="pun">.</span><span class="pln">sfx </span><span class="pun">+</span><span class="pln"> config</span><span class="pun">.</span><span class="pln">txt </span><span class="pun">+</span><span class="pln"> </span><span class="typ">Office2003</span><span class="pun">.</span><span class="lit">7z</span><span class="pln"> </span><span class="typ">Office2003</span><span class="pun">.</span><span class="pln">exe</span></font></pre> <font face="Comic Sans MS" size="4"><br> This will create your silent .exe in the same folder...<br> Well seems we're all done.... Copy your fresh Office2003.exe out of the virtual machine to your computer.....<br><br> Did I forget anything ? Leme know....<br><br>OK NOW AFTER THAT PART, DO I MAKE AN ADDON OR DO I JUST USE THE SILENT EXE I CREATED. WHERE DO I PLACE IT ON MY CD <br></font>

when i use office shrinker, it installs office then gives errors that i cannot find files, what files???????????

ok i managed to use ORK after done the unattended.mst file was created on the desktop i copied it into my officexp folder then used the tutorial with winrar to create a sfx archive it resulted in on file with a nice icon i copied it to the oem install folder and created in notepad the cmd file anything else i need to do??? before creating the iso in nlite?<br><br>RIGHT NOW IM GOING THROUGH THE WHOLE FORUM PICKING UP BITS AND PIECES TO GET THIS RIGHT<br> <br> IF SOMEONE COULD JUST UPLOAD THEIR RUNONCEEX COMMAND FILE AND THINGS I COULD EDIT THEM AND GET IT RIGHT <br>

Ok checked out the tutorial i compiled and edit where nessecary Step 1 Download the ORK (Office Resource Kit) 2003 and when installing it, choose Custom Installation Wizard in order to make an administrative install. Copy your Office CD in a folder on your hard disk, start the installation wizard (you will find it in the Start menu under Microsoft Office) and point it to the Office folder. Now you can put in the serial number, choose which programs to install or not and many other things. You don't change in the ORK, you change it in the batch file, i.e you add the command in the batch file start /wait %systemdrive%\install\Applications\Office2003\setup.exe TRANSFORMS=Unattended.MST /qb Question: the batch file lets say I name it OfficeXP should it be OfficeXP.bat or OfficeXP.com? and this batch file should be in the oem folder, install? Do I also need a guirunonce entry in nlite? Add all files to winrar to make SFX silent switch: PRO11.MSI /QN My winrar commands, you can copy and paste to yours:;The comment below contains SFX script commands Setup=PRO11.MSI /QN TempMode Silent=1 Overwrite=1 Title=Microsoft Office 2003 Professional SP3 1. On General tab, enter the following into the "Run after extraction" field: PRO11.MSI /QN 2. On the Modes tab: - tick "Unpack to temporary folder" - select "Hide all" under "Silent mode" - select "Overwrite all files" under "Overwrite mode" 3. On the Text and icon tab, enter the following text in the "Title of SFX window" field: Microsoft Office 2003 Professional SP3 That is it! however if you use ORK to do a fully unattended customised install use the following, once you have your MST file. 1. On General tab, enter the following into the "Run after extraction" field: setup.exe TRANSFORMS=Unattended.MST /QN 2. On the Modes tab: - tick "Unpack to temporary folder" - select "Hide all" under "Silent mode" - select "Overwrite all files" under "Overwrite mode" 3. On the Text and icon tab, enter the following text in the "Title of SFX window" field: Microsoft Office 2003 Professional SP3

i cannot get it right. there are so many tutorials for making a silent addon for xp

ok sorry

once again always when i reformat my pc, i have sounds schemes that i copy over to c;windows media folder. if it asks me to overwrite i say yes. they already have the same names as the orginal ones. now in nlite i can put them in the oem folder and create one called media. when xp installs it will overwrite it but how do i include it in a batch files to automatically say yes when overwriting these particular sound scheme was used on xp dark edition

i followed the tutorial from unattended.msfn.org MSFN's Unattended Windows : Office 2003 Advanced Installation Office 2003 Advanced Installation In this guide, we'll show you how to customize your Office 2003 installation with the Custom Installation Wizard. » Section 1 - The Custom Installation Wizard Copy the contents of your Office 2003 disc to: C:\XPCD\$OEM$\$1\install\Applications\Office2003\ Make sure you enable showing of Hidden files and folders via the Folder Options so the CAB files are copied as well (this does not apply to Administrative Installation Points) Download: Office 2003 Resource Kit Tools Execute ork.exe to install the Office 2003 Resource Kit Tools. Go to Start > Programs > Microsoft Office Tools > Microsoft Office 2003 Resource Kit Tools and select Custom Installation Wizard. You'll be presented with the first screen of 22 to go through. It won't take too long to go through, because most of these options can be skipped: In step 2, choose the MSI file in your Office2003 folder. That would be PROPLUS.msi for Office2003 Professional with Frontpage (and PRO.msi without Frontpage) Step 3: Create a new MST file Step 4: Name it Unattended.MST in C:\XPCD\$OEM$\$1\install\Applications\Office2003\ Step 5: Leave Alone, unless you want to specify a different destination directory to install Office 2003 into. Go through the rest of the steps to customize your Office 2003 installation, and skip sections that you don't understand. At the end, you are shown your command line to run: This command will perform a silent installation of Office 2003 using the Unattended.MST file you created in the Custom Installation Wizard to set your customized options. But we don't want to use the exact command shown above as this wouldn't exist when installing from a CD, so we will need to change this when we add it to a batch file: TRANSFORMS=C:\XPCD\$\$1\install\Applications\Office2003\ Unattended.MST /qb- changed to... TRANSFORMS=Unattended.MST /qb- » Section 2 - The Office 2003 Batch Command As you read at the end of the last section, we needed to change the path in the TRANSFORM syntax in order for it to work. Below are the full batch commands you can use, so add these lines to your batch file: ECHO. ECHO Installing Office 2003 Professional ECHO Please wait... start /wait %systemdrive%\install\Applications\Office2003\setup.exe TRANSFORMS=Unattended.MST /qb- That's it! Submitted by Alanoll. Last updated 2005-12-18 19:44:50 by Alanoll but at the last part where i have to change TRANSFORMS=C:\XPCD\$\$1\install\Applications\Office2003\ Unattended.MST /qb- to TRANSFORMS=Unattended.MST /qb- this i cant edit it in the box i really want to have office 2003 professional integrated in my xp cd what am i doing wrong?? RIGHT NOW IM GOING THROUGH THE WHOLE FORUM PICKING UP BITS AND PIECES TO GET THIS RIGHT IF SOMEONE COULD JUST UPLOAD THEIR RUNONCEEX COMMAND FILE AND THINGS I COULD EDIT THEM AND GET IT RIGHT

ok i checked, understand now.

i have tried but cant get it right can anyone help me making a batch file to delete all jp_ files on a folder? i want to delete all desktop wallpapers on the extracted iso xp cd before using nlite. also after installing xp the install folder where the tweaks file is, i also want to have removed just after xp is installed

Microsoft Windows XP [Version 5.1.2600] © Copyright 1985-2001 Microsoft Corp. C:\Documents and Settings\Administrator>makecab Microsoft ® Cabinet Maker - Version 5.1.2600.5 Copyright © Microsoft Corporation. All rights ERROR: Could not find file: C:\bliss.jpg C:\Documents and Settings\Administrator>