TheDr!ll

Cyclic redundancy error is normally a bad burn to the CD OR DVD, If using nero to burn the files back .. you can enable it to compare the files that have been copied. This should stop the message from coming up.

Nope..none as yet, need some one to mod the driver to x64 ...any offers????

no one...

Hi all, Im having a problem getting my epson perfection 610 scanner working with xp64 bit, i have tryed modding the driver files as per Micro$oft site..but to no avail. Anyone have any clues or had any success with this scanner? I dont really want to buy another one as its been so good with Xp 32 bit. thanks.

Im not sure if I read your post correctly but, why not use the native drivers supplied in xp64 to boot up, then install the updated ones whilst in windows.. If this is not the issue just ignore.

Yes maybe, but you only have to click the .exe file to install them after the unattended install has finished using windows native drivers..until we can integrate them properly anyway!!

The nvraid drivers are causing havoc to install, if you are not using the raid config and just sata drives the native drivers in windows will work fine.

No good as yet m8, my install works fine with the native drivers in windows as I am not using raid, just two seperate size SATA (160+200gig) drives..nlite will put in the audio and the lan drivers ok, and remove all windows junk thats not required. One cool App!!

Nvidia x64 sata drivers , wont work with integrated install and nlite ...just get re-boots the same as manually installing the drivers..works fine with sound and lan drivers tho.

Having the same problem here, the $PROGS directory in $OEM just installs to the STD programme files folder..I have tryed $PROGS(x86) to no avail...does anyone know the correct directory structure for 64 bit xp? $PROGS86, $PROGS 86, $PROG86 , $86PROGS, ??????????????? Dr!ll.

Go here..this will do it for you easily... http://www.xp-antispy.org/

er i think they're only for intel nforce4 sli Dr!ll <{POST_SNAPBACK}> From the inf file .... MCP04SSS="NVIDIA nForce4 Intel® Edition Serial ATA Controller" MCP04SSP="NVIDIA nForce4 Intel® Edition Parallel ATA Controller" CK804SSS="NVIDIA nForce4 Serial ATA Controller" CK804SSP="NVIDIA nForce4 Parallel ATA Controller" Works on my system pyro...amd k8n 64 bit!! Try and download it and give it a go.

new drivers avaliable..nforce 4 ver 7.11 beta from nvidia .com

Hi pyro, I still cant get a full integrated nvidia cd working as yet either..and I have never had a raid config...good luck and hope you get it working m8. Drill.

Neither can I m8...coaster city dood

I got it to work by using the latest drivers on www.planetamd.com using Green Machines method Placing these lines at the end of my txtsetup.sif file Also I'm running a Asus K8N-E Dlx MB if that makes any difference [SourceDisksFiles] nvrdx64.sys = 1,,,,,,4_,4,1 nvatax64.sys = 1,,,,,,4_,4,1 [HardwareIdsDatabase] GenNvRaidDisk = "nvrdx64" *_NVRAIDBUS = "nvrdx64" PCI\VEN_10DE&DEV_008E = "nvatax64" PCI\VEN_10DE&DEV_0085 = "nvatax64" PCI\VEN_10DE&DEV_00D5 = "nvatax64" PCI\VEN_10DE&DEV_00EE = "nvatax64" PCI\VEN_10DE&DEV_00E3 = "nvatax64" PCI\VEN_10DE&DEV_00E5 = "nvatax64" PCI\VEN_10DE&DEV_0035 = "nvatax64" PCI\VEN_10DE&DEV_0036 = "nvatax64" PCI\VEN_10DE&DEV_003E = "nvatax64" PCI\VEN_10DE&DEV_0053 = "nvatax64" PCI\VEN_10DE&DEV_0054 = "nvatax64" PCI\VEN_10DE&DEV_0055 = "nvatax64" Then I compressed all the files except for txtsetup.oem using makecab. And copied them to the AMD64 folder of my CD source files. Now if I could just get the si3114r drivers to work. <{POST_SNAPBACK}> Did you add information to [sCSI] and [sCSILOAD] in txtsetup.sif? I have tryed with your info to no avail, and included adding to [sCSI] and [sCSILOAD] sections...just seems to hang. Dr!ll.

Hi pyr0 m8, still no luck with the nvidia x64 unattended install ... there has to be a way to do this, even if not the winnt.sif method, seems like other people are doing this with x64 but not with the nvidia nforce 3 or 4 drivers. My 32 bit install works ok with xp and 2003 server...not tryed 2003 server x64 yet...will do it this weekend and report back. Dr!ll.

<{POST_SNAPBACK}> LETS SEARCH THE NET FOR BIG POPPA PUMP, AND SEE HOW HES DONE IT!!!

Hi again Pyr0, I think when we get the real official Mcoy drivers from Nvidia with .CAT files in ...I recon we can get it working OK as we did with 32 bit XP. Just have to wait M8..as no-one on here can give any real answers to do this..unless they are using some other kind of chipset motherboards!!

Yes it would be nice if we were given some sort of clue to installing these xp64 raid drivers into the O/S so we can actually use it!!! Anyone had any success with this at all on this forum? Any help would be welcome, as the tryed and tested methods do not seem to work for pyro and myself.

None of the 64x nvidia drivers that I have used , have a .cat file...even whql ones.

Try these new beta xp64 drivers out m8..lets see if we can get an install going. http://www.k8we.com/files/software/NV_656_WINXP64.zip

Ive got the same problem, I can get my 32 bit xp integrated no problems but cant get 64bit working at all. http://www.msfn.org/board/index.php?showtopic=45407

This is my winnt.sif file, that I also used for my 32 bit version that installs fine, I dont get a blue screen of death nor do I get to a windows logo... ;SetupMgrTag [Data] AutoPartition=1 MsDosInitiated="0" UnattendedInstall="Yes" AutomaticUpdates=yes [unattended] UnattendMode=FullUnattended UnattendSwitch="yes" OemSkipEula=Yes OEMSkipWelcome = 1. OemPreinstall=Yes Repartition = yes TargetPath="*" FileSystem = ConvertNTFS KeyboardLayout="United Kingdom" DriverSigningPolicy=Ignore NonDriverSigningPolicy=Ignore OemPnPDriversPath=Drivers\ide;Drivers\raid [GuiUnattended] AdminPassword=* EncryptedAdminPassword=NO OEMSkipRegional=1 TimeZone=85 OemSkipWelcome=1 [userData] ProductKey=????-????-????-???? FullName="??????????" OrgName="*" ComputerName=ASUSK8N [Display] BitsPerPel=32 Xresolution=1280 YResolution=1024 Vrefresh=85 [TapiLocation] CountryCode=44 Dialing=Tone AreaCode=???? [RegionalSettings] LanguageGroup=1 SystemLocale=00000809 UserLocale=00000809 InputLocale=0809:00000809 [identification] JoinWorkgroup=WORKGROUP [Networking] InstallDefaultComponents=Yes [shell] DefaultStartPanelOff = Yes DefaultThemesOff = Yes Any obvious faults...?