Jump to content

Zumoc

Member
  • Posts

    168
  • Joined

  • Last visited

  • Donations

    0.00 USD 
  • Country

    Italy

Everything posted by Zumoc

  1. Ok I will do differently next time. I also want to clarify that mine is not a complaint. Only the description of an experience that unfortunately has gone wrong. I'd also like to know if anyone has had the same problem just to see if my mistake or is it a problem of the tool.
  2. Today I installed a version of Windows on the real spot. The installation is successful. Confirm the error on windows update even real machine. One thing that is really annoying me and probably prevent me from using this ISO is that the SATA controller that the floppy is not working. I do not seem to have also uninstall those drivers. Heres the setting:
  3. Notice the shaded area, and several preset options available. Ben created the 742mb .iso with the advanced preset. Good catch, Zumoc. Bilar there a problem in the files contained in manifest folder (winsxs) try this: RUN : type CMD in admin mode and enter : sfc /scannow and give run
  4. Well.I have used a custom. I try. ;D There is also another possibility. Updates are incorporated in incorrect order. Not always the KB number sequence corresponds to the proper sequence of integration.
  5. What is the advanced preset? Mee too appear a message type "windows cannot find (or configure) some component...ecc ecc". Wen you mount the image,go in temporary folders\Windows\winsxs\ and delete the file pending.xml. Is not certain but it can be tested. I have one ultimate iso updated and winsxs folder of 220mb that run but o can't do another because is not working due to a probled just described. I thik tath is a error on a pending.xml file that don't going reconstruct well. Update: While writing the message above, I made an iso file without pending.xml and I managed to boot the pc on VirtualBox. This is good and shows that the deletion of files pending.xml affect the success of the installation. Perhaps it was forgotten. Ben I get this message : The the disk usage is 5.80gb whit 1.5gb of swap file that i always remove because i have enougth RAM. Windows update question whitout the pending.xml . What's appen? This: So the system update whitout pending.xml seem to work!!!.But...there's one "but". It is true that Windows Update works, but in my case, asks to install the update that I had already put in the "integration" section of RT7. Installs updates detected and reboot the virtual machine and restart I get an eror of installing some update. Reboot again and are updates that have not been previously installed as below: The remaining updates are not installed and there is the error code as below: In conclusion I believe that: 1) The cancellation of the file pending.xml allows the successful conclusion of the installation of windows but could give some problems with the catalog update installed. 2) remains to be seen if the error generated by Windows Update is due to an update already installed but not categorized or lack of same file pending.xml. I believe the pending.xml necessary but is reconstructed incorrectly.
  6. Ben I have a question for you. How you managed to decrease the WinSxS folder (x64) with the 1.0.7 release?
  7. I have seen the option "optimize boot.win and install.wim" . What differences are there with rebuilding the image? . From first glance it seems a bit faster. Am I wrong?...And the intregating uodate function seem improved but iwait the end of the work for testing.Meanwhile, thanks for the effort.
  8. Have you remove also the swap file? Is 32 or 64bit? I think that the 1.0.7 is again a PRE beta so it is restricted to developeR's. Publish a tool in pre-beta would give an inadequate instrument and not optimized for newbie user. Better to wait at least a beta not you think?.
  9. Zumoc I have good news for you. Check my post #500 on Dead0's topic. I have reduced the Winsxs folder to ~200 files on x64 with everything working! Nice!. Can be launched via RT7? I tried the batch file but I is not working correctly. It 'probably the folder "S2" does not exist in my Italian ISO. is it possible? I do not see and I do not see even in the operating system installed.
  10. Yours is a classic problem on the beta release. We can not wait to go always good. The advice to you is, or works only with vLite or work only with RT7. In both cases the strengths and weaknesses as you've already seen.
  11. You are correct sir. Agree, if Vlite removes some things dang near impossible for a second program to come along and try to read certain elements from the image that was moved, rearranged, deleted and such.Stick to one thing, eventually RT7 may be more complete with feedback from all that want these things. In fact i reported some "improvements" to make possible more comprehensive RT7. But already some time since I heard Ben. I assume that he is working on the new beta. I wrote some notes in private but I was not yet responded.
  12. Also, I used initially vlite to lighten the WinSxS folder and RT7 for the rest but the two programs have difficulty working together. Indeed installed first vLite, decreased the WinSxS folder and then uninstall to install vlite RT7. However that does not work and why you believe it is because the two programs disassembled and reassembled the file file in a different and incompatible with each other.
  13. If you've tried all possible drivers, it means that something is missing from the Windows CD or wrong drivers. Missing the correct driver so you may have been eliminated or RT7 or vLite. If I remember correctly, your laptop has the intel chipsets but may not be sufficient. Check that does not use specific drivers for your PC that is not difficult. The notebook are "crabs" for modified Sysop's.Is my opnion.
  14. Have you tryed to give the driver of the chipset first of the controller ? What's machine have?
  15. Zumoc I have good news for you. Check my post #500 on Dead0's topic. I have reduced the Winsxs folder to ~200 files on x64 with everything working! Nice!. Can be launched via RT7? I didn't even selected components from the Tasks. The one I am using is already trimmed with vlite and before applying RT7 lite on it the os was installing fine. This problem only appears after I used RT 7 Lite. The problem could be vlite. Try not to use it.
  16. Are you sure you have not deleted any drivers? . The second advice may be due to a lack of chipset drivers. You should never remove the drivers in red. I had this problem with the Vbox.
  17. RT7 must emprove the cleaning on the winsxs folder but is in the good way. Each time that a new release was out,contain e improvement.Me too crashes but for clear reasons . In my case I would say it crashed because during costumize was selected a wallpaper that was no longer present. For the rest I do not make other mistakes. If things go as if I think , the version 1.7 should bring good changes but wait to come out the public version. But where did Ben?
  18. my approach to this is that i always run from the built in administrator account and have UAC turned off. i am behind a hard ware firewall and run the windows built in firewall plus i run NOD32 for security. i set UAC to the off position via rt7lite. there is place in there to just turn it off, not sure if you guys know that or not. thewalrus, there is new version in testing so bensam should be releasing something soon. Ok for turn off the UAC but not to definitifely uninstall. Also i set the UAC,Firewall & windefender off.However we are still talking quite free of personal taste. I do not think there is a setting better than the other but there may be a setting that suits your needs.
  19. I agree. I too am a minimalist but not a memory issue but a matter of "frills" that besides being unnecessary for me, could make potential problems or occupy space on the disk. Consider that I do not use the swap file even when I play. I have 4gb and I've never seen the limit. It 'true that the UAC has had a bad reputation with Vista, but Seven is different. I do not think it's worth it to remove all those little apps that can boot without your knowledge. Rather Win remove Defender I saw him once when I was running without AV. I know people who have removed the UAC and have set the user "Administrator" by default. This is to avoid creating more users than necessary. Certainly you can do but use an account as Admin without UAC and everything is stupidly risky. Anyway just my thoughts and everyone must do as they please.However, even if we remove these components, something always remains. For example, icons that do not open anything because it was removed.
  20. I thought, what happens if you remove the UAC and not the UAC Advanced?. I never tried because i never had problems with the UAC, and then I never removed. So my question is this: Why remove something that has no problem to leave it?. If we talk about Vista and Vlite,i had trouble removing the UAC because nothing works. Therefore considering giving only advantages ,i do not think to remove it and does not want much space.
×
×
  • Create New...