mara-
Content Type
Profiles
Forums
Events
Posts posted by mara-
-
-
That's to expensive for me. What do you think about TP-LINK I posted? Should it work the same as that Linksys? Thanks.
Cheers
0 -
Come on, guys. I need some help here. I tested with some WDS enabled router from TP-LINK, but this does not work since Huawei EchoLife HG520 does not support it. But, what about Client routers? This one from TP-LINK says it has AP Client Router Mode (WISP Client). Will this work? Can it connect to any access point or it can only connect to WISP(Wireless Internet Service Provider). Please guys, this is urgent.
Cheers
0 -
Hi,
I have Huawei EchoLife HG520 router. Now, I've got myself IPTV, so I had to move this router to the living room, and my computer is in the other room. Now, is there any router which can connect to this one via wireless connection? I would buy wi-fi card, but I'm sharing my connection with some other people who were connected with wire to Huawei EchoLife HG52. Can anyone suggest something? Thanks in advance.
Cheers
0 -
Yeah, I sort of knew that. I had that cheap supply that just died. And then I decided to buy a quality unit. This unit wasn't cheap at all for me, but I didn't know about the 12V rail thing. If I knew, I would need to add just some small extra money to get even better unit, but that's the past now. The price of my unit is the same as the year ago, so I could probably sell it for decent price (4 years warranty left) and get a new one, but while this one can satisfy the power needs I'll use it. Thanks for the info you provided.
Cheers
0 -
OK, thanks for explanation. BTW, on their page 520W is continuous and max is 600W.
Cheers
0 -
I just asked if I could order 1GB version and it's is 50€ more, to much for me. And from what I could see in benchmarks, there is no big performance difference between two. Only at some huge resolutions there is some difference, like 5-6 frames, but nothing special for me. Thanks again.
Cheers
0 -
OK, thanks. I wold also like Core i5, but that's bigger investment for me now. It would require me to change motherboard and to get DDR3 RAM memory plus Core i5. Well, that's almost whole computer.
I'm planing to do this, but it needs a lot saving. BTW, I'm getting GTX 640 768MB version. I would like to get 1GB version, but it's not available where I live.Cheers
0 -
Hello everybody,
I'm buying new graphic card. I decided for GTX 460. But, I have one doubt concerning to power requirements. I have CoolerMaster Real Power M520 which has 520W. Rest of my components are in my signature. Now, I think this PSU should be enough when we look at wattage especially since this is 80+ efficiency PSU and since recommended PSU is 450W. My concern is 12V rail. If I figured this correctly from Cooler Master page I have 3x12V rail and each is capable of 19A. For this 3 rails there is 408W. So this does not make sense. If we divide 408W/12V=34A. So, these 3x12v rails can't give together 3x19A. But, my main question is will I be able to run this graphic card on this PSU. I read somewhere that it needs 24A. This card requires 2 x PCI-E 6 Pins connectors, so will that in combination give it enough power? Thanks in advance for any info.
Cheers
0 -
Glad I did some thing good, now, don't tell this to the support desk of that UPS .
Don't worry, I wont.
Cheers
0 -
Sorry for really late reply. Problem is solved, thanks to puntoMX. I disabled in Device Manager option "Allow this device to wake the computer" for mouse and keyboard and when power is back computer will NOT power on itself now.
Cheers
0 -
It's Windows 7. I disabled everything, but I once disconnected USB connection after power outage and I waited for power to come back. After it come back, it still powered on my computer. But, I'll test what you suggested.
Cheers
0 -
Well, Cyberpower UPS is working fine for me. No any problem regarding battery or load. Mine is 800VA (450W) and I attached my computer, LCD monitor, network switch and adsl modem and it can work 10-15 minutes depending on current load.
Now, I know I can do what you suggested, but problem is when I'm not at home and I keep my computer powered on all the time. S0, any other suggestions?
Cheers
0 -
How about configuring your Windows, so, no power on/out of power-save when you move your mouse or touch a key on your keyboard? Is this an USB or RS232 controlled UPS?
Let's take this step by step
.It's USB controlled UPS. I don't understand why would I need to configure options for mouse or keyboard. It seems that program somehow sends command to start my computer. Some command which is activated before hibernation. In my Asus motherboard I have option "Restore on AC Power Loss" and it's configured on "Power off".
Can you please explain what you meant when you say to configure power options for mouse and keyboard? Why would that have effect?
Cheers
0 -
I contacted support, and they said that auto-restart feature of UPS can not be disabled. But they said that it's possible to do it in BIOS. Well, I don't know what to look for in bios. All wake options are disabled. Anyone have some idea about the BIOS thing?
Cheers
0 -
Hi,
I have the following problem and I hope somebody can suggest some solution.
I have a CyberPower Green Value UPS. It came with PowerPanel Personal Edition Software. It's configured to go in the hibernation after power outage. I configured it to run computer for 1 minute and then to go in hibernation. Here is the thing. After power outage computer will hibernate. But when power is back, UPS will turn on my computer. I don't want it to do this, because it often happens that power just come back for 1 sec couple of times so computer will turn on, then hibernate after 1 min, turn on, then hibernate after 1 min, and so on, which will cause all battery to drain and computer will just shut down improperly which defeats purpose of having UPS. It same happens even if software is configured to shutdown computer. I tried disconnecting USB connection with UPS after power outage, but it still turns on. In bios, all wake options are on disabled. So, it seems that software send some command to computer to turn itself on when power is back before hibernating computer. So, any ideas? Thanks in advance for any help.
BTW, I'm posting this in General Discussion because I can't see this topic fit in any other section.
Cheers
0 -
Thanks for the input, but I changed my mind. I'm going for SAPPHIRE HD 4870 1G GDDR5. It's 15€ more then cards I mentioned in first post and it's much better choice then those two cards.
This one have DirectX 10.1, Sharder v4.1 and GDDR5 which is very fast.
Cheers
0 -
I was just reading that, but I still can't decide. Price is same here. It seems that GTS 250 is slightly better. I need some info now. Can anybody confirm if GTS 250 has Sharder 4.1. According to Gigabyte it has, but I found one review that says it does not have v4.1 but v4.0. Also, I need more opinions. Thanks.
Cheers
0 -
Hi,
I'm planing to buy a new graphic cards. I have narrowed my choice to these two graphic card:
Now, by looking at Core Clock and Mem Clock GV-N250-1GI is definitely better. Now, one things confuses me. N250OC has 128 Stream Processors where R485MC has 800 Stream Processors. Now what this means when it comes to performance? I somehow like N250OC better, but I would like second opinion. And please no comments like go for nVidia, go for ATI from "fans" of one or other. I need opinions which card will give better performance even if that is just small difference. Also, I would be happy to hear if there is third alternative in this price range, since this is the top I can give. Also, first card have DirectX 10 and second DirectX 10.1. I know that there is no much 10.1 games but that is something to consider. Thanks in advance for any input.
Cheers
0 -
Happy birthday, friend.
Cheers
0 -
For those interested, latest version of Eset, v4.0.467, released on September 23. fixed the problem for me.
Cheers
0 -
OK, I'm sure that problem is Eset Smart Security v4. Problem exist with NOD32 Antivirus v4 too. Problem exist in Windows Vista and Windows 7, at least on my computer. I got laptop with Windows XP and NOD32 Antivirus v4 and no problem. Pool Nonpaged Bytes are now on 68 MB, and my computer is up for 6 hours, I have 1650MB free. Of course, I turned now SuperFetch and everything works fine.
Cheers
0 -
OK, I'll be sure tomorrow, but it seems that Malwarebytes' Anti-Malware is not the problem. Eset Smart Security is causing the problem and it's same with NOD32 Antivirus. They must screwed something with some model update since I did not have this problem before, and that's why I had the same problem on Win 7.
cluberti and Mr Snrub, thank you for you help.
Cheers
0 -
Thanks for the tips. Well, you can see in my signature what my configuration is, so it's not nvidia chip-set. It's Intel chipset, but I have Asus graphic card which has nVidia chip-set. And, I run Eset Smart Security, so there is a firewall. I'll try to un-install it.
Can I somehow do the debug with your instructions? And, thank you for your help.
Cheers
EDIT: I'm still doing testings, but it seems that Malwarebytes' Anti-Malware's IP Protection is causing the problem. When I'm sure, I'll post here.
0 -
OK, I done what you said. I'm attaching the text output.
Cheers
EDIT: From what I can see, but I'm not sure, netio.sys is leaking, but I can't figure why or how to make it stop?
0
I'm planing to do this, but it needs a lot saving. BTW, I'm getting GTX 640 768MB version. I would like to get 1GB version, but it's not available where I live.
.
Connect two router wiressly
in Networks and the Internet
Posted · Edited by mara-
OK, thank you for the info. I just remembered that I have 4-port LAN router switch. Could I use access point, like this, set it in client mode and connect it with my LAN router switch?
Cheers