Jump to content

WinPE 2.0 simple Ghost Menu HTA


keythom

Recommended Posts

Thanks for sharing. I've taken a lot of the code into my own HTA but again I'm a newbie at this.

Can someone help me or point me to the correct direction on how to change the background image when an option is chosen from using a radio button? Here is my situation:

I added two(radio) buttons that say (development and production) to readily distinguish the environment that they are going to get the image from. My problem is I cannot change the background image (am totally inexperience in html or hta) defined in <DIV>. Can someone please help me on how to do this?

What I am doing is this:

strBody = strBody & "<td><Input type=radio name=envList checked value=Production onclick=ChangeBG>" &_

"Production" & "</BUTTON><BR>"

strBody = strBody & "<Input type=radio name=envList value=Development onclick=ChangeBG>" &_

"Development" & "</BUTTON></td>"

sub changeBG

...

end sub

Is it possible to change it this way? What am I suppose to put in the "changeBG" to change the SRC?

Thank you very much.

You guys rock!!!

Link to comment
Share on other sites


strBody = strBody & "<td><Input type=radio name=envList checked value=Production onclick=proBG>" &_
"Production" & "</BUTTON><BR>"
strBody = strBody & "<Input type=radio name=envList value=Development onclick=devBG>" &_
"Development" & "</BUTTON></td>"


Sub proBG
bg.InnerHTML = "<img src='probg.bmp'>"
End Sub

Sub devBG
bg.InnerHTML = "<img src='devbg.bmp'>"
End Sub

Link to comment
Share on other sites

What I'm finding is that whenever I attempt to launch a command line - for example, the entire "ghost32.exe -mode=load src=c:\image.gho etc..." it fails.

Usually I get a "the user cancelled this command" or something like that.

It seems to be related to the use of spaces in the variables building the command. I can launch the executable itself without issue, but try to add the switches to it and it fails.

Link to comment
Share on other sites

I am just floored right now, this is exactly what I need for our manufacturing environment. We currently use a DOS based imaging setup which was old when we created it, now it's up to me to bring our imaging up to the 32-bit standard. I am so pumped to find all this information, its going to take me a while to take it all in but I just wanted to pop up and say wow. :thumbup

Link to comment
Share on other sites

t:\Programs\ghost11\files\ghost32.exe  -clone,mode=restore,src=k:\images\sample.gho,dst=1

If I run just the executable part (t:\Programs\ghost11\files\ghost32.exe) it runs fine. Once I add the switches, it fails.

You're missing the last part of the clone command, the sze parameter.

Link to comment
Share on other sites

t:\Programs\ghost11\files\ghost32.exe  -clone,mode=restore,src=k:\images\sample.gho,dst=1

If I run just the executable part (t:\Programs\ghost11\files\ghost32.exe) it runs fine. Once I add the switches, it fails.

You're missing the last part of the clone command, the sze parameter.

While that may be - and likely due to me just leaving it off when typing my reply - it doesn't solve the issue I'm having.

Link to comment
Share on other sites

Ok I've read some more and I think I was wrong about the sze switch as it is not necessarily needed, but still think the error is in the syntax of your switch. I've searched and I cannot find a mode=restore. There is a mode=prestore or mode=load. The prestore mode restores a specific partition and the load mode restores the entire disk. Heres a link to the -clone syntax. Switches: Cloning

Link to comment
Share on other sites

It's the original wizard.hta script, with my ghost32.exe locations...

<html>
<!--
'********************************************************************
'*
'* File: wizard.hta
'* Author: greg & fisher
'* Created: Mar 2007
'* Modified:
'* Version: .9
'*
'* Description: windows imaging platform
'*
'* Dependencies: tested on and for WinPE 2.0 with WMI, Scripting,
'* XML, HTA packages
'* Notes: Line 26 - might want to make this "normal" when you are
'* testing and don't want the hta fullscreen
'* Line 58 - customize your headings here
'* Line 72, 101 - confirm directory.name path, this would be a mapped
'* drive to the filer where the images shorcut dir is
'* Line 193 - confirm background image source location
'* Line 200 - confirm path to ghost executable
'*
'********************************************************************
-->

<!****************************************************************************>
<!* HTA Header >
<!****************************************************************************>
<HEAD>
<TITLE>Imaging Application</TITLE>
<HTA:APPLICATION
BORDER = None
APPLICATION = Yes
WINDOWSTATE = normal
INNERBORDER = No
SHOWINTASKBAR = Yes
SCROLL = No
APPLICATIONNAME = "Windows PE Wizard"
NAVIGABLE = Yes
>
<!-- external stylesheet -->
<link rel="stylesheet" type="text/css" href="htaStyle.css" />
</HEAD>

<!****************************************************************************>
<!* Begin Script >
<!****************************************************************************>
<script Language=VBScript>

'****************************************************************************
'* Globals
'* setup global script parameters
'****************************************************************************
Option Explicit
Dim strTaskValue, objShell, objFso, strBody, objWmiService
Set objShell = CreateObject("WScript.Shell")
Set objFso = CreateObject("Scripting.FileSystemObject")
Set objWMIService = GetObject ("winmgmts:\\.\root\cimv2")

'****************************************************************************
'* Window_OnLoad
'* load up behavior and preferences
'****************************************************************************
Sub Window_Onload
self.Focus()
strBody = "<H1>PE Build and Recovery Environment</H1>" &_
"<H2>Select Images to apply an OS image using Ghost.<BR><BR>" &_
"Please select an image category:<BR><BR>"
enumDirs
End Sub

'****************************************************************************
'* enumDirs
'* find directories and create category buttons
'****************************************************************************
Sub enumDirs
Dim colSubfolders, objFolder, fileName
'enumerate folders in images folder
Set colSubfolders = objWMIService.ExecQuery _
("Associators of {Win32_Directory.Name='z:\winpe'} Where AssocClass = Win32_Subdirectory ResultRole = PartComponent")
'create html buttons from each folder name
For Each objFolder in colSubfolders
fileName = objFolder.fileName
strBody = strBody &_
"<button id='" & fileName & "' onClick='enumImages("" & fileName & "")'>" & fileName & "</BUTTON>"
Next
'post resulting html body to document
strBody = strBody & "<BR><HR><BR>"
body.innerHTML = strBody
End Sub

'****************************************************************************
'* enumImages
'* find images and create radio buttons
'****************************************************************************
'this sub is a little messy because of limitations of win32_shortcutfile and need to go between fso and wmi for different info
'also, without the advantages of .net sorting classes, the old bubble sorting is not the funnest

Sub enumImages(fileName)
Dim colFilelist, objFile, strButtons, objShortcut, colTargetList, objTarget, x, y, strKey, strItem
ReDim arrButtons(1,-1)

'reset display element style
details.innerHTML = ""
details.style.visibility = "hidden"
' strButtons = "<table id=buttonTable>"
'enumerate ghost image shortcuts in specific images subfolder from enumDirs
Set colFileList = objWMIService.ExecQuery _
("ASSOCIATORS OF {Win32_Directory.Name='z:\winpe\" & fileName & "'} Where ResultClass = CIM_DataFile")
'find ghost image shortcut targetpath (fso)
For each objFile in colFileList
If objFile.Extension = "lnk" Then
Set objShortcut = objShell.CreateShortcut(objFile.name)
'find ghost image shortcut target (wmi)
Set colTargetList = objWMIService.ExecQuery _
("Select * from CIM_Datafile Where name = '" & replace(objShortcut.targetpath,"\","\\") & "'")
'add radio button label (from fso) and radio button target (from wmi) to an array
For each objTarget in colTargetList
ReDim Preserve arrButtons(1,UBound(arrButtons,2)+1)
arrButtons(0,UBound(arrButtons,2)) = objShortcut.Description
arrButtons(1,UBound(arrButtons,2)) = "<Input type=radio name=radioList id='" & objTarget.Drive & objTarget.Path &

objTarget.fileName &_
"' onClick=showRadioInfo>" & objShortcut.Description & "</BUTTON><BR>"
Next
End If
Next
'perform a a shell sort of the string array based on button label
For x = 0 To UBound(arrButtons,2) - 1
For y = x To UBound(arrButtons,2)
If StrComp(arrButtons(0,x),arrButtons(0,y),vbTextCompare) > 0 Then
strKey = arrButtons(0,x)
strItem = arrButtons(1,x)
arrButtons(0,x) = arrButtons(0,y)
arrButtons(1,x) = arrButtons(1,y)
arrButtons(0,y) = strKey
arrButtons(1,y) = strItem
End If
Next
Next
'create combined buttons html code from sorted buttons array
For x = 0 To UBound(arrButtons,2)
strButtons = strButtons & "<tr><td id=buttonTd>" & arrButtons(1,x) & "</td></tr>"
Next
' strButtons = strButtons & "</table>"
'create a start button with start image command and append and post resulting html to body
body.innerHTML = strBody & strButtons & "<BR><HR><BR><button id=start Accesskey=S onclick=doTask(strTaskValue)><U>S</U>tart

Image!</BUTTON><BR>"
start.style.visibility="hidden"
End Sub

'****************************************************************************
'* doTask
'* run task selected by radio button
'****************************************************************************
Sub doTask(doMe)
objShell.Run doMe
End Sub

'****************************************************************************
'* showRadioInfo
'* display details of radio button selection in details divider
'****************************************************************************
Sub showRadioInfo
Dim objTextFile, Radio, strRadioValue, strDetails
'set details and start element styles
details.style.visibility = "visible"
start.style.visibility = "visible"
'find checked button
For Each Radio in Document.getElementsByName("radioList")
If Radio.Checked = True Then
'create imaging command line from button id
strTaskValue = Chr(34) & "t:\Programs\ghost11\files\ghost32.exe" & Chr(34) & " -clone,mode=load,src=" & Chr(34) &

Radio.Id & ".gho" & Chr(34) & ",dst=1"
'display image details in details element if they exist
If objFso.FileExists(Radio.Id & ".htm") Then
Set objTextFile = objFso.OpenTextFile(Radio.Id & ".htm", 1)
strDetails = objTextFile.ReadAll()
Else
'display error message in details element if no matching details file found
strDetails = "Can't find anything!!!<BR><BR>" &_
"Make sure the info file has the same name as the .gho and has an .htm extension."
End If
End If
Next
'post resulting html to details element
Details.innerHTML = strDetails
End Sub

'****************************************************************************
'* Reset
'* reset the tool interface, also reloads the code (helpful for programming)
'****************************************************************************
Sub Reset
Location.Reload(True)
End Sub

</Script>
<!****************************************************************************>
<!* End Script / Begin HTML >
<!****************************************************************************>

<BODY>
<DIV id=bg>
<img src=winpe.bmp>
</DIV>

<DIV id=body></DIV>
<DIV id=details></DIV>

<DIV id=tools>
<Button id=ghost onclick=doTask('"t:\Programs\ghost11\files\ghost32.exe"')>Ghost</BUTTON>
<Button id=cmd onclick=doTask('%comspec%')> Cmd </BUTTON>
<Button id=notepad onclick=doTask('notepad')> Notepad </BUTTON>
<Button id=taskmgr onclick=doTask('taskmgr')> Taskmgr </BUTTON>
<Button id=close onclick=self.close()> Quit </BUTTON>
<Button id=reset onclick=reset> ResetApp </BUTTON>
<Button id=reboot onclick=self.navigate('reboot.hta')> Reboot </BUTTON>
</DIV>
</BODY>
</HTML>

<!****************************************************************************>
<!* End HTML >
<!****************************************************************************>

This is the snippet that creates the string that should get launched by the button:

'find checked button
For Each Radio in Document.getElementsByName("radioList")
If Radio.Checked = True Then
'create imaging command line from button id
strTaskValue = Chr(34) & "t:\Programs\ghost11\files\ghost32.exe" & Chr(34) & " -clone,mode=load,src=" & Chr(34) & Radio.Id & ".gho" & Chr(34) & ",dst=1"

Link to comment
Share on other sites

  • 2 weeks later...

i love this hta menu. i use it on my software imaging recovery program but i need help on it. i used a 2 different recovery program, how can i used the button to distinguish which program to used to reload the image. for example

image a, image b, image c use a recovery software

image d, image e, image f uses another recovery software

i want to use this menu to keep it simple for my techs.

any ideas or sugesstion or how to code properly.

remind you that i am total noobie at this. i have general idea how it works but not to code it ... any ideas would appreciated

thanks

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...