AMD Sempron 2800+ overclocking help

Followers

August 7, 200620 yr

hey all, ive got a amd sempron socket 754 2800+ after doin some searching ive found posts of people overclocking this chip from the stock 1.6ghz speed to 2.0ghz how would i go about doing this?

heres my exact system specs

Field Value

CPU Properties

CPU Type AMD Sempron 2800+

CPU Alias Venice-256 S754

CPU Stepping DH-E6

CPUID CPU Name AMD Sempron Processor 2800+

CPUID Revision 00020FC2h

CPU Speed

CPU Clock 1600.0 MHz

CPU Multiplier 8.0x

CPU FSB 200.0 MHz (original: 200 MHz)

Memory Bus 160.0 MHz

DRAM:FSB Ratio CPU/10

CPU Cache

L1 Code Cache 64 KB (Parity)

L1 Data Cache 64 KB (ECC)

L2 Cache 256 KB (On-Die, ECC, Full-Speed)

Motherboard Properties

Motherboard ID 63-150-0000010-00101111-110305-nVidia$K8N62150_K8NF4G-SATA2 BIOS P1.50

Motherboard Name ASRock K8NF4G-SATA2 (2 PCI, 1 PCI-E x1, 1 PCI-E x16, 1 CNR, 2 DDR DIMM, Audio, Video, LAN)

Chipset Properties

Motherboard Chipset nVIDIA GeForce 6100, AMD Hammer

Memory Timings 2.5-3-3-8 (CL-RCD-RP-RAS)

Command Rate (CR) 2T

SPD Memory Modules

DIMM1: Nanya M2U51264DS8HC3G-5T 512 MB PC3200 DDR SDRAM (3.0-3-3-8 @ 200 MHz) (2.5-3-3-7 @ 166 MHz)

BIOS Properties

System BIOS Date 11/03/05

Video BIOS Date 05/03/29

DMI BIOS Version P1.50

Graphics Processor Properties

Video Adapter ATI Radeon X600 (RV370)

GPU Code Name RV370 (PCI Express x16 1002 / 5B62, Rev 00)

GPU Clock 398 MHz (original: 398 MHz)

Memory Clock 202 MHz (original: 203 MHz)

thanks

August 8, 200620 yr

have you ever overclocked before and if not, are you asking how to.

http://www.msfn.org/board/index.php?showtopic=77890

there is a very good overclocking guide here. read it a few times and dont skimp on stuff. basically what you need to do is first put ur ram on a divider so ur only testing the cpu. then raise your htt(fsb) until prime95 errors on you. when that happens raise your vcore up a little and prime95 it again. if there are no errors for about an hour then raise the htt(fsb) and try it over again.