Swordfish Posted June 16, 2006 Share Posted June 16, 2006 My problem is one that Windows (2000 Pro & XP Pro) freezes randomly, this problems occurs only on one machine :ABIT IT 7 MAX 2 v 2.0P4 3.06 Ghz1 Gig PC 21000 Ram1 x 40 Gig Maxtor2 x 160 Gig Maxtors (on HTP 374 Raid as seperate disks)The most comon times for freezing is when using these programsNewsleecher (for newsgroups)QuickPar (for reapiring items d/loaded from newsgroups)IEI have only had this problem for the past 3-4 months and occur whether or not I have XP Pro installed or 2000 Pro. The programs work perfectly on my other machines (Packard Bell AMD Athalon XP 2000 with 1 gig Ram & Compaq 340 Mhz with 512 gig of Ram (Spare Machine))I have performed many clean installations and tried dif combinations of RAM to no avails, also the system can support up to 2 GB or Ram but if I put 1.5 Gig in the system will only ever show 1 Gig.All the drivers I have are the most up to date and the BIOS is also up to date.Can anyone give me any suggestions?Thanks Link to comment Share on other sites More sharing options...
LLXX Posted June 17, 2006 Share Posted June 17, 2006 What are the temperatures? Intermittent freezing can be caused by an overheating CPU.Run a program like BURNP6 for a while, it will *really* heat up the CPU and if it freezes then it's overheating or memory problem.Use MemTest86+ to determine if the memory is failing. Link to comment Share on other sites More sharing options...
janus zeal Posted June 17, 2006 Share Posted June 17, 2006 (edited) are you haveing the same type of issue as me?http://www.msfn.org/board/index.php?showtopic=76601fyi, its doing it nowsystem temps:cpu: 56 chdd: 46 cNotebook Hardware Control is an awesome program Edited June 17, 2006 by janus zeal Link to comment Share on other sites More sharing options...
Swordfish Posted June 18, 2006 Author Share Posted June 18, 2006 (edited) Temps seem fine - this is a lsit from the Everest program : Sensor Properties: Sensor Type Winbond W83627HF (ISA 290h) Motherboard Name Abit BD7II / BG7 / IT7 Series Chassis Intrusion Detected No Temperatures: Motherboard 47 °C (117 °F) CPU 64 °C (147 °F) Maxtor 6E040L0 35 °C (95 °F) Cooling Fans: CPU 2482 RPM Chassis 2812 RPM Voltage Values: CPU Core 1.54 V +3.3 V 2.66 V +5 V 5.05 V +12 V 11.67 V +5 V Standby 4.70 V VBAT Battery 2.72 V DIMM 2.32 V DIMM VTT 1.15 V AGP VDDQ 1.57 VPC was custom built and has fan on CPU plus 4 other internal fans.Heat was a thought, but does not seem to be the issue. Mem has been tested in other machines plus I have used Hiren Boot CD 8.1 to test the mem and have no probsSuggestions?Cheers Edited June 18, 2006 by Swordfish Link to comment Share on other sites More sharing options...
Aegis Posted June 19, 2006 Share Posted June 19, 2006 Did you add any new hardware lately? Try removing anything that you might've added within that time period. Also try disabling Hyperthreading if you have it enabled. Link to comment Share on other sites More sharing options...
hougtimo Posted June 19, 2006 Share Posted June 19, 2006 Temps seem fine - this is a lsit from the Everest program : Sensor Properties: Sensor Type Winbond W83627HF (ISA 290h) Motherboard Name Abit BD7II / BG7 / IT7 Series Chassis Intrusion Detected No Temperatures: Motherboard 47 °C (117 °F) CPU 64 °C (147 °F) Maxtor 6E040L0 35 °C (95 °F) Cooling Fans: CPU 2482 RPM Chassis 2812 RPM Voltage Values: CPU Core 1.54 V +3.3 V 2.66 V +5 V 5.05 V +12 V 11.67 V +5 V Standby 4.70 V VBAT Battery 2.72 V DIMM 2.32 V DIMM VTT 1.15 V AGP VDDQ 1.57 VPC was custom built and has fan on CPU plus 4 other internal fans.Heat was a thought, but does not seem to be the issue. Mem has been tested in other machines plus I have used Hiren Boot CD 8.1 to test the mem and have no probsSuggestions?Cheers64'C for CPU seems waaaay too hot - don't let it go above 40'C. You might want to check that the heatsink isn't filled up with dust and starving the CPU of air (that happened too me). If not, get a beefier heatsink and fan. Also, Check the thermal paste. Link to comment Share on other sites More sharing options...
LLXX Posted June 19, 2006 Share Posted June 19, 2006 Temps seem fine - this is a lsit from the Everest program : Sensor Properties: Sensor Type Winbond W83627HF (ISA 290h) Motherboard Name Abit BD7II / BG7 / IT7 Series Chassis Intrusion Detected No Temperatures: Motherboard 47 °C (117 °F) CPU 64 °C (147 °F) Maxtor 6E040L0 35 °C (95 °F) Cooling Fans: CPU 2482 RPM Chassis 2812 RPM Voltage Values: CPU Core 1.54 V +3.3 V 2.66 V +5 V 5.05 V +12 V 11.67 V +5 V Standby 4.70 V VBAT Battery 2.72 V DIMM 2.32 V DIMM VTT 1.15 V AGP VDDQ 1.57 VPC was custom built and has fan on CPU plus 4 other internal fans.Heat was a thought, but does not seem to be the issue. Mem has been tested in other machines plus I have used Hiren Boot CD 8.1 to test the mem and have no probsSuggestions?Cheers64'C for CPU seems waaaay too hot - don't let it go above 40'C. You might want to check that the heatsink isn't filled up with dust and starving the CPU of air (that happened too me). If not, get a beefier heatsink and fan. Also, Check the thermal paste.Actually maximum temperature for your CPU is 70°C, but idling at 64° is much too high... and your +3.3v is suspiciously low (2.66v?) Link to comment Share on other sites More sharing options...
hougtimo Posted June 19, 2006 Share Posted June 19, 2006 Maybe someone has tried overclocking and its gone a little bit wrong?I'm not pointing fingers, but it just seems a lil suspicious. I would reset you BIOS to defaults and see if that helps. Link to comment Share on other sites More sharing options...
Swordfish Posted June 19, 2006 Author Share Posted June 19, 2006 Have stripped PC Down and yes the heatsink was clogged with dust. Cleaned the fan and the sink and now temp is down to 51.Also have taken the drives of RAID and disabled it in the BIOS. Clean installation of XP for over 12 hours and no freeze (fingerts crossed).Lets see what happens.CPU is not overclocked btw. Was oc'd to 3.4 at one time but not for long and that was about 18 months ago. Link to comment Share on other sites More sharing options...
Swordfish Posted June 20, 2006 Author Share Posted June 20, 2006 Just an update to everything posted so far.I have repalced PSU and sorted the 3.3 voltage problemsCPU has had fresh thermal paste applied to to connection heatsink and fan and heatsink has also been cleaned.Now my CPU has an idle temp of 41 - 44 cI used Super PI to test CPU and it peaked at a temp of 60 C max, and there has been no freezes whatsovere since then.Hopefully this is the problem resolved and I go back on my previous words of "heat not being a problem", as it looks like this was the most likely culprit.Cheers to every for the help and comments. Special thanks for Trixxy for the PSU repalcement. !!! Link to comment Share on other sites More sharing options...
Trixxy Posted June 20, 2006 Share Posted June 20, 2006 You're welcome. I think the 3.3v rail was the most likely culprit, but we'll see how it goes now that it's been boosted up from 2.7 to 3.3v. At least if you still get freezes, that's one possible cause scored off the list. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now