Raider Posted July 30, 2003 Posted July 30, 2003 I was really excited about using the unattended setup got everything burned onto a CD and had my trusty floppy ready for the F6 setup of my RAID drivers and it is looking on the CD for them???Where do I put them on the CD and what do I add to the winnt.sif and or batch.cmd
Aaron Posted July 30, 2003 Posted July 30, 2003 http://www.MSFN.org/board/index.php?act=ST&f=70&t=7546
Raider Posted July 30, 2003 Author Posted July 30, 2003 You must use signed drivers. Unsigned drivers are not installed during an unattended installation.Well that basically leaves me out because none of the Silicon Image RAID Drivers for the Asus A7N8X Deluxe are signed and I want my SATA RAID.
Raider Posted July 30, 2003 Author Posted July 30, 2003 Would I still have to have signed drivers if I used this in my winnt.sif [DriverSigningPolicy=Ignore] ?
reaps Posted August 3, 2003 Posted August 3, 2003 *cough* bump *cough* I have the same problem, as in it won't see the drivers on the (flopp) disc while doing the unattended install. Would doing the same sort of thing below work?http://www.MSFN.org/board/index.php?act=ST&f=70&t=7454Would love this to work properly as i would never have to sit and watch an xp install agin
seewen Posted August 3, 2003 Posted August 3, 2003 *cough* bump *cough* I have the same problem, as in it won't see the drivers on the (flopp) disc while doing the unattended install. Would doing the same sort of thing below work?http://www.MSFN.org/board/index.php?act=ST&f=70&t=7454Would love this to work properly as i would never have to sit and watch an xp install agin try the second method (my 2nd message ) : http://www.MSFN.org/board/index.php?act=ST&f=70&t=7454It worked for lot of people (while the first method, with "$OEM$/Textmode" doesn't works for some ).
King_Tweaker Posted August 10, 2003 Posted August 10, 2003 Hi all,First post!I have spent the last two days trying to get xp to install on this NF7-S but I can't get it to work and I know its a problem with these **** raid drivers.Anyone get it working.KT
Geckotek Posted August 11, 2003 Posted August 11, 2003 Good instructions for editing TXTSETUP.SIF and adding driver files for SiI drivers.http://www.nforcershq.com/forum/viewtopic....8892&highlight=
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now