amdphr3@kXP Posted June 19, 2003 Posted June 19, 2003 check ur hdd cable to make sure that u hav plugged it in so the red stripe on the cable connects to pin 1 of the IDE connector. If u got it backwards ur pc wont boot at all
reubend Posted June 19, 2003 Author Posted June 19, 2003 check ur hdd cable to make sure that u hav plugged it in so the red stripe on the cable connects to pin 1 of the IDE connector. If u got it backwards ur pc wont boot at allyeah, ive already checked that like 10 times but i will do it again just to make sure, thanks for all the help so far.
reubend Posted June 19, 2003 Author Posted June 19, 2003 also, i can hear everythign start up, i just dont get picture.
amdphr3@kXP Posted June 19, 2003 Posted June 19, 2003 check the mobo as well to make sure nothin has come loose or been plugged in backwards, everything will still power up but the sys will just hang when it tries to go thru the POST if the cable is backwards, or the drive is a dud. If that fails and everything is plugged in, try the drive in another pc. If the same thing happens in there, then take the drive back to where u got it from
reubend Posted June 19, 2003 Author Posted June 19, 2003 check the mobo as well to make sure nothin has come loose or been plugged in backwards, everything will still power up but the sys will just hang when it tries to go thru the POST if the cable is backwards, or the drive is a dud. If that fails and everything is plugged in, try the drive in another pc. If the same thing happens in there, then take the drive back to where u got it fromok, i formatted the drive in my pc, so im pretty sure its good.i hope the motherboard isnt fried.im gonna check all the cables, my hards are so **** big, i probably kocked a wire loose or something.
reubend Posted June 19, 2003 Author Posted June 19, 2003 also, if this helps, the computer doesnt beep like it normally would.
reubend Posted June 19, 2003 Author Posted June 19, 2003 can anyone help?this is my brothers computer so if i cant fix this thing up, im gonna have to pull out MY wallet
ThA_FiLeR Posted June 19, 2003 Posted June 19, 2003 no beep means one of your components is either broken or not hooked up correctly, this can be ram,cpu, cd-rom, or hdd... I don't think the Video-Card can stop the comp from booting since I had a bad vid-card once and it still beeped, but just didnt give me picture, btw the beep means that the power self test has completed and basicly means that all components are powered up and working fine..
amdphr3@kXP Posted June 20, 2003 Posted June 20, 2003 yes thats right, either the hdd u put in may be a dud, some cables are loose or something else inside ur system has died, check everything to make sure everything is where it should be
reubend Posted June 20, 2003 Author Posted June 20, 2003 thanks for the info guys, im going to pull out and put back in all of those components, this place is the best
reubend Posted June 20, 2003 Author Posted June 20, 2003 update: checked most of the stuff, put the drive in my computer, and it works fine. to me it looks like that computer needs a new motherboard, **** i just got him a new one last year
ThA_FiLeR Posted June 20, 2003 Posted June 20, 2003 update: checked most of the stuff, put the drive in my computer, and it works fine. to me it looks like that computer needs a new motherboard, **** i just got him a new one last year lol, before that I would try putting in as minimal as possible, just one stick of ram (one ur sure of works), cpu, and hook up power supply, if it gives u a beep then try adding another component like vid-card, then hdd, that way u can determine for sure..
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now