aresgodofwar Posted August 26, 2005 Share Posted August 26, 2005 im attempting wol across internet. im using the utility from www.depicus.comand i think my router is not letting the magic packet get through. i have a linksys wireless router and my firmware is 1.45.10, Apr 15 2004. here is the info i am using with the wol utility. mac address is mac of my lan card. ip address is my cable modem ip address. subnet mask is 255.255.255.255and port number is a random port i chose and i forwarded that port to 192.168.1.255 in the router setup. i even tried 192.168.1.100 which is my static ip address. i know that the packet is at least reaching my router. i have logging enabled and when i look at the traffic, it shows the port and the originating ip address. the thing is, i don't think the router is forwarding the magic packet. so, does anyone know of a way i can trick my router into sending the magic packet? or does anyone know of a router that will work with wol over the internet? Link to comment Share on other sites More sharing options...
RogueSpear Posted August 26, 2005 Share Posted August 26, 2005 So far as I know you can't perform WOL across a router without a relay. And unless you made a typo there is no way that your subnet mask is 255.255.255.255. Sending a WOL out is really nothing but a broadcast of the target machine's MAC, and broadcasts don't leave subnets.Some of the management suites like HP's InsightManager, Intel LANDesk, etc. have their own solutions to this, but if you're using something like Dameware NT Utilities I don't know how you'd get around the problem. Link to comment Share on other sites More sharing options...
aresgodofwar Posted August 28, 2005 Author Share Posted August 28, 2005 well one solution i found is that my router will not support forwarding the "magic packet" to wake up my computer. my router blocks it automatically, or so i think. there is another router that will do this, but it takes a 3rd party firmware. i could buy a more expensive router, but who wants to spend hundreds of dollars. www.sveasoft.com is the site that sells the firmware in case anyone wanted to know. they say that they can take the linksys router and give it all kinds of features and it would work almost just like a high end cisco router Link to comment Share on other sites More sharing options...
al_v Posted January 15, 2008 Share Posted January 15, 2008 It is not necessary to route "magic packet" on your router, "magic packet" is a just one of a packet you recieve from internet. Actually you should setup broadcast forwarding on some port (7 or 9, or any other you would like) that will broadcast all packets recevied from internet in you LAN. Then you can try internet wake-on-lan tool with subnet mask 255.255.255.0 (or other, depend on your LAN settings, try see in you network card settings, TCP/IP configuration). Also you can try this service http://www.rshut.com/products/wol - it will automatically try to suggest your subnet mask, all you need is to enter IP and MASK. As an additional option you can schedule wake up on required time and date. Link to comment Share on other sites More sharing options...
ceez Posted January 16, 2008 Share Posted January 16, 2008 (edited) i used to have a setup like that years ago with my pc at home. I had a linksys 4 port router and linksys nic with WOL feature as well as the mobo had the WOL connection for the nic to plug into.This is the setup as i remember it from back then:I used a free dns/static ip service (no-ip.com)I remember I had a command line utility that I could run from work in which i would type my dns name provided by no-ip, ie: myftp.ceez.comMy router was configured to fwd that particular port (7 or 9) to the internal network ip address of my pc, ie: 192.168.1.100My pc would magically wake up! oh it was awesome, complete controll over my pc! Now I do remember something that was ticking me off....I was first trying it by turning my computer off, you CANT turn it off, it has to be on standby (or was it hibernate?!?!) for it to work.hope this helps,ceezps- now that i checked out depicus, i think that's the cmd line tool i was using! works like a charm. Edited January 16, 2008 by ceez Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now