jasinwa Posted August 5, 2005 Share Posted August 5, 2005 Why is the older Q254660 msmouse.vxd being used in 2.0.2 ? Version 4.10.2223thx...<{POST_SNAPBACK}>Older? <{POST_SNAPBACK}>Well, I only say 'older' since the one I have on my 98SE box is dated 6/18/02 and is a version 11.40.852The poster I was asking about it on another forum told me the one from 2.0.2 is MSMOUSE.VXD 6/14/1999 version 4.10.2223 Link to comment Share on other sites More sharing options...
MDGx Posted August 6, 2005 Share Posted August 6, 2005 Why is the older Q254660 msmouse.vxd being used in 2.0.2 ? Version 4.10.2223thx...Older? Well, I only say 'older' since the one I have on my 98SE box is dated 6/18/02 and is a version 11.40.852The poster I was asking about it on another forum told me the one from 2.0.2 is MSMOUSE.VXD 6/14/1999 version 4.10.2223MSMOUSE.VXD 11.40.852 and all other 11.xx.xxx and 10.xx.xxx builds are officially installed only by MS IntelliPoint software, and do not work if IntelliPoint software not also installed.Last build officially installed by MS patches/updates/hotfixes is 4.10.2223, and that's the 1 u should have if u r running 98SE without MS IntelliPoint software.IP last version for 98SE is 4.12:Microsoft IntelliPoint Mouse Drivers, Tools + Wheel for Windows 9x/NT4/2000/ME/XP/2003 + MS-DOS 6/7/8:http://www.microsoft.com/hardware/mouseand...d/download.mspxIntelliPoint v4.12 for Windows 98/98SE/NT4/ME [9.68 MB, English]:http://download.microsoft.com/download/4/8...12EngALLMsi.exeHope this helps. Link to comment Share on other sites More sharing options...
MDGx Posted August 6, 2005 Share Posted August 6, 2005 I have attempted to upgrade to Windows ME and realized I lost my product key. I aborted the installation but my version has been changed to that of Windows ME.What can I do to correct this besides a format and re-install?Thanks in advance.95/98/ME product key can be recovered from the registry:http://www.mdgx.com/newtip21.htm#PRKEeven on aborted installations.Hope this helps. Link to comment Share on other sites More sharing options...
MDGx Posted August 6, 2005 Share Posted August 6, 2005 Does any1 know the link for HTML32.CNV 2003.1100.6252 ?Thanks in advance.no official one yet...but take the file attached.Many thanks for all the links, guys.You ARE very helpful people. Link to comment Share on other sites More sharing options...
jasinwa Posted August 6, 2005 Share Posted August 6, 2005 (edited) Hope this helps.<{POST_SNAPBACK}>thanks, yes it does....There is also reference to another hotfix with an msmouse.vxd 4.10.2225 but I can't find that!Q318307 Edited August 6, 2005 by jasinwa Link to comment Share on other sites More sharing options...
jasinwa Posted August 6, 2005 Share Posted August 6, 2005 Last build officially installed by MS patches/updates/hotfixes is 4.10.2223, and that's the 1 u should have if u r running 98SE without MS IntelliPoint software.<{POST_SNAPBACK}>Is the 4.10.2223 supposed to be in that hotfix Q254660 ?I dl'ed it from the link for Q254660 on the first post in this topic and it's 4.10.2222 (I extracted the exe with 7zip and checked the version).So where is 4.10.2223 ? Link to comment Share on other sites More sharing options...
Petr Posted August 6, 2005 Share Posted August 6, 2005 There is also reference to another hotfix with an msmouse.vxd 4.10.2225 but I can't find that!Q318307It contains just Vmouse.vxd 4.10.2225. It is part of Intellimouse 4.12.Petr Link to comment Share on other sites More sharing options...
Petr Posted August 6, 2005 Share Posted August 6, 2005 Is the 4.10.2223 supposed to be in that hotfix Q254660 ?I dl'ed it from the link for Q254660 on the first post in this topic and it's 4.10.2222 (I extracted the exe with 7zip and checked the version).So where is 4.10.2223 ?Q254660 contains MSMOUSE.VXD, VMOUSE.VXD and MOUHID.VXD, all files version 4.10.2223. Maybe you were confused by Product Version 4.10.2222?Petr Link to comment Share on other sites More sharing options...
MDGx Posted August 6, 2005 Share Posted August 6, 2005 (edited) Hope this helps.thanks, yes it does....There is also reference to another hotfix with an msmouse.vxd 4.10.2225 but I can't find that!Q318307Gape, Petr, erpdude8, myself and others here at MSFN forums are aware of this.When [if] it becomes available [and if tested to make sure it is safe for all environments], Gape will probably include it in the next 98SE SP release, and I will add it to my 98SE patches page:http://www.mdgx.com/web.htm#98SEand I will also post it here:http://www.msfn.org/board/?showtopic=46581VMOUSE.VXD 4.10.2225 is installed by Gape's 98SE SP 2.0.2 and IP 4.12.Q254660 is available here:http://www.mdgx.com/files/Q254660.EXEand contains these 3 files:MOUHID.VXD 4.10.2223MSMOUSE.VXD 4.10.2223VMOUSE.VXD 4.10.2223More details:http://support.microsoft.com/?id=254660Hope this helps. Edited August 6, 2005 by MDGx Link to comment Share on other sites More sharing options...
jasinwa Posted August 7, 2005 Share Posted August 7, 2005 Q254660 contains MSMOUSE.VXD, VMOUSE.VXD and MOUHID.VXD, all files version 4.10.2223. Maybe you were confused by Product Version 4.10.2222?Petr<{POST_SNAPBACK}>thank you, I did notice at home it showed 4.10.2223 and maybe I did look at product version I will verify the same in the office, where I first did the update. Link to comment Share on other sites More sharing options...
jasinwa Posted August 7, 2005 Share Posted August 7, 2005 Hope this helps.<{POST_SNAPBACK}>Yes, it does. Thank you. As always, you are a plethora of information.....and I visit your site a lot to get great info on tweaks, etc..... Link to comment Share on other sites More sharing options...
krick Posted August 8, 2005 Share Posted August 8, 2005 I just installed 2.0.2 and I must say that I don't like the new boot logos.The first problem is that they're based on the XP "rolling hills" desktop, which I really don't care for, then it looks like crap dithered down to 256 colors or whatever.I much prefer the simpler original ones with "second edition" added to the bottom. Link to comment Share on other sites More sharing options...
Gape Posted August 10, 2005 Author Share Posted August 10, 2005 I just installed 2.0.2 and I must say that I don't like the new boot logos.The first problem is that they're based on the XP "rolling hills" desktop, which I really don't care for, then it looks like crap dithered down to 256 colors or whatever.I much prefer the simpler original ones with "second edition" added to the bottom.<{POST_SNAPBACK}>They're optional. Also, you can easily delete them. (Just delete: C:\LOGO.SYS and C:\WINDOWS\LOGOW.SYS). Link to comment Share on other sites More sharing options...
krick Posted August 12, 2005 Share Posted August 12, 2005 I just installed 2.0.2 and I must say that I don't like the new boot logos.The first problem is that they're based on the XP "rolling hills" desktop, which I really don't care for, then it looks like crap dithered down to 256 colors or whatever.I much prefer the simpler original ones with "second edition" added to the bottom.<{POST_SNAPBACK}>They're optional. Also, you can easily delete them. (Just delete: C:\LOGO.SYS and C:\WINDOWS\LOGOW.SYS).<{POST_SNAPBACK}>What I mean is that I like your other boot logos instead. The ones that your service pack included before these ones. Link to comment Share on other sites More sharing options...
Phaneendra Rao Posted August 14, 2005 Share Posted August 14, 2005 Hello.I have installed sesp202en patch on my Athlon AMD +2500 machine with Pinnacle PCTV Tuner card. I have faced the following problem and couldfind the reason at last. IE6 is installed on my system.Whenever I start the Pinnacl PCTV, the following error is popping up"Vision caused and Invalid page fault at module unknown" . I have reinstalled the software several times and also used the drivers update. I get the"Vision caused and Invalid page fault in pfc.dll" when recording is started.The Gallery window has also not opened. After uninstalling the sesp202 patchthe software is working normally. Now I installed sp20rc1 patch and the softwareis working normally. Please let me know the reason for this bug and fix for it.thank u, Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now