Lucius Snow Posted September 5, 2004 Posted September 5, 2004 Hello all,I've got a problem with a Western Digital 60 GB ATA100 drive which runs in PIO only. So the speed goes around 2 MB/s only. The BIOS recognizes it well as UDMA5 but Windows XP (+SP2) see it as PIO only althought "DMA if possible" is selected in the IDE controller. The motherboard is an Asus P4PE and the chipset an Intel i845. So i've tried again after installing the chipset utlity but no change.Another hard drive, the same model, had the exact same symptom on my machine with another hardware configuration (chipset Intel i875). Of course i already tried different cables at 80 pins. My last attempt was to uninstall the Primary IDE channel in the device controller and reboot. I already did it in the past. However, this time, i got a blue screen 7B when restarting Windows. I've never been able to fix that error except by doing a repair installation of Windows.Any suggestion appreciated.Thank you very much.
N1K Posted September 5, 2004 Posted September 5, 2004 Have you tried to flash BIOS with the latest version from ASUS web site?
Lucius Snow Posted September 5, 2004 Author Posted September 5, 2004 Have you tried to flash BIOS with the latest version from ASUS web site? Yes, it has been done.
Saraband Posted September 6, 2004 Posted September 6, 2004 install the intel inf chipset utility, then install the intel application accelerator. open app acelerator and check the dma on each ide
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now