I used to burn from Nero 5.5.10.35. It had a check box marked 'verify data after burning' on the main burn dialog box. Now I am using Nero 6.3.1.17. I can't figure out the way to verify written data. Help plz.

____________________________

;config.tXt

;27.06.2004

;21:05 PST

Graphic Card: Matrox Millenium G450 DualHead (32 MB DDR)

Model #: G45FMDHA32DB

Sr #: PBG19967

Driver version: 6.83.017 in Win98, 5.92.006 in WinXP

PD version: 6.83.017 in Win98, 6.92.004 in WinXP

VT version: N/A

MGA Bios version: 1.4.004

Hardware rev.: 133

CPU: AMD Athlon 600 MHz (AMD K7600MTR51B) @687MHz (FSB114, CL2)

Chipset: VIA Apollo KX133 (VT8731 + 82C686A)

Motherboard: SL-77KV

Motherboard Bios: L5

PCB ver: M5

Motherboard chipset patches: AGP GART 1.80a from VIA Hyperion 4.51v

RAM: 1x Kingston 256MB KVR133X64C3/256 (@148MHz)

OS: Windows 4.10.2222A & Windows XP 5.1.2600.1106 SP1a

Desktop resolution and color depth: 1024x768, 32bpp

DirectX version: DX9.0b, 4.09.0000.0902 in Win98, Win2000

Hard Drive: Seagate Baraccuda 7200.7, ST380011A; firmware v3.06

SCSI card type: NIL

Sound card and driver version: Integrated VIA AC'97, drv v5.40a in Win98/WinXP

Hardware rev.: 032

Monitor brand: Philips 105S2

CD-ROM Drive (make/model): Asus S520/A, firmware rev. 2.0L

Network card: NIL

Fax MODEM: Amigo AMI-2019E, (also called AM HW 3056) (PCI slot 3 of 5)

Driver Version: 3.37

Hardware revision: 001

IRQ settings and other devices:

-----------------------

Ahsan Zaheer Shaikh

Student

H.S.C.-II

Adamjee Govt. Science College,

Karachi.

Hi there,

The check box you are after appears at the bottom left of the burn dialog box (when you actually tell Nero to start to write to the CD).

Smudge