deomsh Posted May 3 Share Posted May 3 I am afraid something went wrong during the 'EDIT'. Should work again. Link to comment Share on other sites More sharing options...
awhooley Posted May 3 Author Share Posted May 3 Here you are, it seems to start a little quicker after that, and the volume/ gain is lower. volume adjustments in waveset seem to be more linear now and not chopping on and off, but the max volume seems to be lower than before. HDAICINE.TXT HDALOGE.TXT Link to comment Share on other sites More sharing options...
deomsh Posted May 3 Share Posted May 3 Thanks! Judged to the response of this GET-verb in HDAICIN.TXT you really did the test with headphones unplugged: sent $019F0900; got $7FFFFFFF ticks=0000000A Sources on this verb are not really clear however. I hope next version of HDAICOUT.HDA will be the final one. Volume is set back to maximum (0x4A). In previous version I gave you the default state (0x3C). What is left: only a few SET verbs: ;;This_version_of_HDAICOUT.HDA_should_be_used_for_Thinkpad_T420_(Conexant_cx20672_-_Alsa_ctx5066_family),20240503,by_deomsh_made_for_awhooley Begin $0017FF00;AC_VERB_SET_CODEC_RESET; $0017FF00;AC_VERB_SET_CODEC_RESET;! ;;node_0x01:_Audio_Function_Group $00170500;AC_VERB_SET_POWER_STATE;Power up! $00171601;AC_VERB_SET_GPIO_MASK,01 $00171701;AC_VERB_SET_GPIO_DIRECTION,01 $00171501;AC_VERB_SET_GPIO_DATA,01 ;;node_0x10:_DAC1 $01070500;AC_VERB_SET_POWER_STATE;Power up! $0103B04A;AC_VERB_SET_AMP_GAIN_MUTE;max_vol(default=3C) ;;node_0x19:_OUT_HP_Detect_([Jack]_HP_Out_at_Ext_Left) $01970500;AC_VERB_SET_POWER_STATE;Power up! ;;node_0x1C:_OUT_Detect_(Line_Out_at_Ext_N/A) $01C70500;AC_VERB_SET_POWER_STATE;Power up! ;;node_0x1D:_IN_OUT_EAPD_Detect_(Line_Out_at_Ext_N/A) $01D70500;AC_VERB_SET_POWER_STATE;Power up! $01D70C02;AC_VERB_SET_EAPD_BTLENABLE;ExtenalAmplifierPowerUp ;;node 0x1F:_OUT_([Fixed]_Speaker_at_Int_Bottom) $01F70500;AC_VERB_SET_POWER_STATE;Power up! End HDAICOUT3_(Thinkpad_T420_Conexant_cx20672_Alsa_ctx5066_family).zip Link to comment Share on other sites More sharing options...
awhooley Posted May 7 Author Share Posted May 7 (edited) Hi! sorry about the delay was busy the last few days, I just copied the new file over, and it sadly doesnt want to boot into Windows anymore. Its no problem ill just use the rev2 file, it works great. Thanks again for all your help! You are doing great things for the Retro Computing community! Edited May 7 by awhooley typo Link to comment Share on other sites More sharing options...
deomsh Posted May 7 Share Posted May 7 Thanks. Maybe first line is too long. What if you delete all seven lines starting with ';;' ? BTW: with the verb '$0103B04A;AC_VERB_SET_AMP_GAIN_MUTE;max_vol(default=3C)' I'd try to give you your max volume back as in debug-version! Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now