dmitradze Posted February 8, 2012 Share Posted February 8, 2012 (edited) Hello.I've got Seagate 7200.12, 500Gb, now it isn't shown in BIOS.Read a lot about CC, very similar symptoms. In Victoria and so on.But. In terminal and Putty (without any isolation or connecting read-write) it shows:RST 0x10MRW: Disk Ctlr Initialization Completed(P) SATA ResetNo messages with CC. It reacts on CTRL+Z, spins well, does /U, /Z (runs and stops when commanding), clears Smart /N1 without errors, does V1 and V4.But after doing m0,2,2,,,,,22 it shows sth like this:Max Wr Retries = 00, Max Rd Retries = 00, Max ECC T-Level = 14, Max Certify Rewrite Retries = not supportedUser Partition Format Successful - Elapsed Time 0 mins 00 secs Zone re-format was skipped.After doing everything written about CC it is not recognized in BIOS anyway.What to do with Max Certify Rewrite Retries = not supported?Whan else can I do? Edited February 8, 2012 by dmitradze Link to comment Share on other sites More sharing options...
jaclaz Posted February 8, 2012 Share Posted February 8, 2012 From what you write the only thing (among the "known ones") you haven't done is clearing the G-list, but I have NO idea if it could be of ANY use or if it will brick the disk for good If I get it right you are in a BSY status and not in a LBA0 one http://www.facebook.com/note.php?note_id=152456431478526jaclaz Link to comment Share on other sites More sharing options...
dmitradze Posted February 8, 2012 Author Share Posted February 8, 2012 And the G-list I've cleared already. Yes, Victoria shows this green BUSY indicator. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now