RT Seven Lite - RC build 1.7.0 and Beta build 2.6.0

[Bilar Crais]

Hello: I have a Canon LIDE 100 Canoscan. I simply can't install the drivers. The device is detected, and Windows Updates pulls the drivers down and tries to install them, but the installation fails, with the device reporting Error 18 (reinstall drivers). I've tried the drivers from the Canon site, but they will not install either. I know this scanner used to work with Windows 7, so the problem must lie with something I'm removing with RT7 Lite. Also, I'm having a problem with WinSAT. While it runs initially on Windows installation, I cannot initiate a new system rating from the system control panel applet. Further, besides the total performance index rating, no other numerical values are displayed...the categories are blank. I can initiate a WinSAT session via command line, but the values are still blank. Would someone help me troubleshoot this problem please? I've attached my lastsession.ini

Thank you,

C

Edited September 30, 2010 by Bilar Crais

[winterstorm]

Hi,

I have also a problem with installing my driver for my all in one printer !!!!

I want to know if someone know what components I'll have to keep for doing my printer work.

Thanks

Lastsession.inf

[myselfidem]

Hi,

I have also a problem with installing my driver for my all in one printer !!!!

I want to know if someone know what components I'll have to keep for doing my printer work.

Thanks

Hello!

What is the model of your all-in-one printer?

Edited September 30, 2010 by myselfidem

[myselfidem]

I have made a screenshot of my error messages when mounting a 64-bit Win7 in a Win7 64-bit surrounding. There was no vlite. There are no other proggies, realy only 7lite!

Win7 runs without problems, WAIK is installed, but there are these errors (the first in english, the second in german).

Hello!

You can check if your account is always runing with admin rights and privileges!

http://www.justanswer.com/questions/2ltne-windows-server-2008-i-have-a-support-team-but-dont-want

Cheers

*Edit: about privileges

http://support.microsoft.com/kb/314294/en-us

You can use Ntrights.exe inside:

Windows Server 2003 Resource Kit Tools

I've found very useful informations, but only with French language:

Développez.com

Edited September 30, 2010 by myselfidem

[winterstorm]

Hi,

This is an old HP model, HP PSC1350 with printer and scanner.

My purpose is to do a small windows 7 as small as possible, so with none of functionality I don't need (wlan, vpn, ....). BUT the only component that don't work is the printer one.

So this is what I remove :

- ACCESSORIES : Windows Fax and Scanner

- SERVICES : Fax, Internet Connection Sharing (ICS), Server, Workstation

And this is what I keep and seems to be in touch with printer functionality :

- DRIVERS : Printers (HP) and Scanners (HP)

- MULTIMEDIA : Windows Acquisition Wizard

- SERVICES : Print Spooler, Windows Image Acquisition

And my 2 Questions are :

- Do I have to check the default features "Print and Document Services", with all or none components ?

- Do I have to keep "File and Printer Sharing" with dependencies (DNS, Internet Connection Sharing, Network List Service, TCP/IP Net Bios, Windows Connect Now, Windows Firewall) ?

Many Thanks.

[myselfidem]

Hello winterstorm!

It's seems that the trouble is to have removed some components:

upnphost=True

and some others needed. You can see inside the list below, et have help here:

http://wiki.blackviper.com/wiki/UPnP_Device_Host

More help:

Category:Windows 7 Services

I post the list made by bensam56 about RECOMMENDED FILES NOT TO DELETE

(RECOMMENDED NOT TO DELETE or there could be BAD, as in breaking OS consequences)

*Application Experience

*Computer Browser

*DHCP

*DRM (various things need some dlls from this)

*Diagnostics

*Dynamic Volume Manager (Windows Backup needs this, cant remove windows backup yet, so I would leave it.)

*Distributed Link Tracking Client

*DTC

*DNS Client

*EAP (Wireless)

*Event Log

*File and Printer Sharing Server

*Game Explorer

*ICS Internet Connection Sharing

*Interactive Services Detection

*IP Helper (IPv6)

*Jet Database engine

*Link-Layer Topology Discovery

*Multimedia Class Scheduler

*Network and Sharing Center

*Network Explorer

*NAP (Wireless Internet)

*Network List Service

*NLA Network Location Awareness

*Remote Access Auto Connection Manager (needed for VPNs)

*Remote Access Connection Manager (VPNs as well)

*Routing and Remote Access (VPNs as well)

*Reliability and Performance Monitor

*Secondary Logon

*SSTP

*SNMP Simple Network Management Protocol (needed for routers and for reliable networking)

*SSDP Discovery

*TCP/IP netbios helper

*Telephony

*UnPNP Universal Plug and Play

*Usermode Driver Framework

*Volume Shadow Copy (Needed by parts of the OS)

*Windows Firewall (most of the other networking features need this)

*Windows Remote Management

*Windows Media Codecs (needed for wmp and lots of various video games, good idea to keep)

*Windows Picture and Fax Viewer

*Windows Color System

*Windows Connect Now

I hope that can help you!

Regards

Edited September 30, 2010 by myselfidem

[winterstorm]

Thanks I'll try this

[Bilar Crais]

I got both my WinSAT and scanner working with the attached profile. It only occupies an additional 500mb on the Windows install, so it was a good compromise.

Lastsession.txt

[Fed03]

hi,

i've just installed this new rc from the 1.4 that i've unistalled before...all it's ok but when i try to make the iso the prog says that the img is created but in the folder there isn't anything and also i can't directly burn because it doesn't create the temp.iso..i've tried many times but the result didn't change.

THX

Edited September 30, 2010 by Fed03

[myselfidem]

hi,

i've just installed this new rc from the 1.4 that i've unistalled before...all it's ok but when i try to make the iso the prog says that the img is created but in the folder there isn't anything and also i can't directly burn because it doesn't create the temp.iso..i've tried many times but the result didn't change.

THX

Hello!

Have you use the button "Apply" to make the modifications on your new Windows Image before create the ISO file, and add Win7.iso name at the end of the file (example)?

You can also try "Search" to find where is located your ISO file on your computer!

Edited September 30, 2010 by myselfidem

[Fed03]

hi,

i've just installed this new rc from the 1.4 that i've unistalled before...all it's ok but when i try to make the iso the prog says that the img is created but in the folder there isn't anything and also i can't directly burn because it doesn't create the temp.iso..i've tried many times but the result didn't change.

THX

Hello!

Have you use the button "Apply" to make the modifications on your new Windows Image before create the ISO file, and add Win7.iso name at the end of the file (example)?

You can also try "Search" to find where is located your ISO file on your computer!

just done it....no results...i'm going to try to make a new one image

[Fed03]

now rt7lite freezed during muonting image step in the beginning....

now, i can't start rt7lite because the WIM image is mounted but in cmd i've tried theese command

Dism /cleanup-wim

dism /unmount-wim /mountdir:%temp%\rt_mount /discard

dism /unmount-wim /mountdir:%temp%\rt_mount_boot /discard

for the first and the last command no problem all goes right

but when i use the second one i receive this error

Error: 0xc1420117

The directory could not be completely unmounted. This is usually due to applica

tions that still have files opened within the mount directory. Close these file

s and unmount again to complete the unmount process.

The DISM log file can be found at C:\Windows\Logs\DISM\dism.log

what can i do?

ty

[myselfidem]

now rt7lite freezed during muonting image step in the beginning....

now, i can't start rt7lite because the WIM image is mounted but in cmd i've tried theese command

Dism /cleanup-wim

dism /unmount-wim /mountdir:%temp%\rt_mount /discard

dism /unmount-wim /mountdir:%temp%\rt_mount_boot /discard

for the first and the last command no problem all goes right

but when i use the second one i receive this error

Error: 0xc1420117

The directory could not be completely unmounted. This is usually due to applica

tions that still have files opened within the mount directory. Close these file

s and unmount again to complete the unmount process.

The DISM log file can be found at C:\Windows\Logs\DISM\dism.log

what can i do?

ty

Take care to choose the correct path for Dism.exe

"C:\Program Files\Windows AIK\Tools\amd64\Servicing\Dism.exe"

You can try to unmount a new time with:

For the "rt_mount" folder

>Dism.exe /unmount-wim /mountdir:%temp%\rt_mount /discard

You can find "dism.log" file inside : "%Systemdrive%\Windows\Logs\DISM\dism.log"

Edited October 1, 2010 by myselfidem

[Bilar Crais]

ty

Oops...nevermind. The above solution is probably more elegant.

Edited October 1, 2010 by Bilar Crais

[Fed03]

now i receive this

Uploaded with ImageShack.us

HELP

EDIT: serching for dism.exe showed no results....how is it possible?

Edited October 1, 2010 by Fed03