jords16 Posted April 12, 2013 Share Posted April 12, 2013 i just did update on my nforce network controller,, now it became nvidia nforce 10/100 mbps etherner....and my cpu usage is now around 60-70% w/ game app opened.... is that normal percentage? Link to comment Share on other sites More sharing options...
doveman Posted April 12, 2013 Share Posted April 12, 2013 upload the ETL fileStrangely, after installing the Net Framework 4.5 and the Performance Toolkit, it didn't automatically add the path so I had to add "C:\Program Files (x86)\Windows Kits\8.0\Windows Performance Toolkit" manually so that I could run xperf without having to go into that directory each time.Then I got thisC:\Windows>xperf -on latency -stackwalk profile -buffersize 1024 -MaxFile 256 -FileMode Circular && timeout -1 && xperf -d DPC_Interrupt.etlxperf: warning: This system is not fully configured for x64 stack tracing.Please modify the registry under: HKLM\System\CurrentControlSet\Control\Session Manager\Memory Managementand set the value: DisablePagingExecutive (REG_DWORD) = 1Then reboot before retrying tracing.Note: Tracing has been enabled, this is just a warning.xperf: error: NT Kernel Logger: Cannot create a file when that file already exists. (0xb7).I don't recall either of these problems before but maybe I already had DisablePagingExecutive set then. I fixed the "cannot create file" with "xperf -stop" although I'm not sure why it happened when this was the first time I'd run xperf since installing it. I got it to start after that but then when I pressed a key to make the file I gotPress any key to continue ...xperf: error: NT Kernel Logger: The instance name passed was not recognized as valid by a WMI data provider. (0x1069).but then I tried again and it's worked on several runs now so it looks like that was just a first time glitch. Link to comment Share on other sites More sharing options...
Bluebomber4evr Posted April 12, 2013 Share Posted April 12, 2013 update the BIOS to 5206 and try to use the GPU in the 2nd PCIe x16 slot (no matter what is written in the manual). if you don't play games, you can also remvoe the 9800 completely and use the HD7540d which is included in the AMD CPU.I've updated the BIOS and ran a trace. I sent you a link with my trace in a PM.The BIOS update doesn't seem to have fixed anything. Link to comment Share on other sites More sharing options...
MagicAndre1981 Posted April 13, 2013 Author Share Posted April 13, 2013 i just did update on my nforce network controller,, now it became nvidia nforce 10/100 mbps etherner....and my cpu usage is now around 60-70% w/ game app opened.... is that normal percentage?Do you have glitches? The BIOS update doesn't seem to have fixed anything.yeah, you have again spikes:Total = 7117 for module tcpip.sysElapsed Time, > 4096 usecs AND <= 8192 usecs, 0, or 0.00%Elapsed Time, > 8192 usecs AND <= 16384 usecs, 8, or 0.11%Total, 7117Have you tried it without the discrete GPU? Link to comment Share on other sites More sharing options...
Bluebomber4evr Posted April 13, 2013 Share Posted April 13, 2013 The BIOS update doesn't seem to have fixed anything.yeah, you have again spikes:Total = 7117 for module tcpip.sysElapsed Time, > 4096 usecs AND <= 8192 usecs, 0, or 0.00%Elapsed Time, > 8192 usecs AND <= 16384 usecs, 8, or 0.11%Total, 7117Have you tried it without the discrete GPU?Do you mean moving the card around? I need the GeForce for the games I play. The onboard video is of no use for games. Link to comment Share on other sites More sharing options...
jords16 Posted April 14, 2013 Share Posted April 14, 2013 The BIOS update doesn't seem to have fixed anything.yeah, you have again spikes:Total = 7117 for module tcpip.sysElapsed Time, > 4096 usecs AND <= 8192 usecs, 0, or 0.00%Elapsed Time, > 8192 usecs AND <= 16384 usecs, 8, or 0.11%Total, 7117Have you tried it without the discrete GPU?Do you mean moving the card around? I need the GeForce for the games I play. The onboard video is of no use for games.yeah!! i tried it w/ nvidia graphics card installed... Link to comment Share on other sites More sharing options...
MagicAndre1981 Posted April 15, 2013 Author Share Posted April 15, 2013 Do you mean moving the card around? I need the GeForce for the games I play. The onboard video is of no use for games.only tst it without the discrete GPU. Do you still have issues or not?yeah!! i tried it w/ nvidia graphics card installed...this reply was not for you. Does updating the nvidia network driver fixes it or not? Link to comment Share on other sites More sharing options...
jords16 Posted April 15, 2013 Share Posted April 15, 2013 Do you mean moving the card around? I need the GeForce for the games I play. The onboard video is of no use for games.only tst it without the discrete GPU. Do you still have issues or not?yeah!! i tried it w/ nvidia graphics card installed...this reply was not for you. Does updating the nvidia network driver fixes it or not?sorry!!! i did not try it yet!!! if i will downgrade my OS to windows xp... can this be fixed?? Link to comment Share on other sites More sharing options...
MagicAndre1981 Posted April 15, 2013 Author Share Posted April 15, 2013 why do you want to go back to XP? XP is dead. Do you still have issues after updating the nvidia driver or not? Link to comment Share on other sites More sharing options...
Bluebomber4evr Posted April 16, 2013 Share Posted April 16, 2013 Do you mean moving the card around? I need the GeForce for the games I play. The onboard video is of no use for games.only tst it without the discrete GPU. Do you still have issues or not?Sorry, I'm not sure what you mean by "discrete GPU." Is this referring to the GeForce card? Link to comment Share on other sites More sharing options...
MagicAndre1981 Posted April 16, 2013 Author Share Posted April 16, 2013 yes, I refer to the Geforce. Remove the card and only use the internal GPU. Are the issues gone? Link to comment Share on other sites More sharing options...
haterz111 Posted April 16, 2013 Share Posted April 16, 2013 (edited) i have high dpc on a fresh install it gets to the point i cannot move my mouse or scroll a webpageHighest ISR routine execution time (µs): 115.437578Driver with highest ISR routine execution time: dxgkrnl.sys - DirectX Graphics Kernel, Microsoft CorporationHighest reported total ISR routine time (%): 0.038439Highest DPC routine execution time (µs): 6753.189634Driver with highest DPC routine execution time: storport.sys - Microsoft Storage Port Driver, Microsoft CorporationHighest reported total DPC routine time (%): 0.072144Driver with highest DPC total execution time: rspLLL64.sys - Resplendence Latency Monitoring and Auxiliary Kernel Library, Resplendence Software Projects Sp.river with highest ISR total time: storport.sys - Microsoft Storage Port Driver, Microsoft Corporationive tried changing my hd drivers/ disconnecting all drives and using a known good drive please helpsabertooth 990fxamd 8350nvidia 660ti4x4 corsair 1333mhzcorsair tx750 v2crucial m4 128 gig ssd Edited April 16, 2013 by haterz111 Link to comment Share on other sites More sharing options...
MagicAndre1981 Posted April 16, 2013 Author Share Posted April 16, 2013 Highest DPC routine execution time (µs): 6753.189634Driver with highest DPC routine execution time: storport.sys - Microsoft Storage Port Driver, Microsoft Corporationthis looks like HDD/SD issues. Which AHCI driver do you use? Link to comment Share on other sites More sharing options...
haterz111 Posted April 16, 2013 Share Posted April 16, 2013 (edited) amd catalyst sata drivers 0.331 and the one before that both give same issue ii keep getting big spikes when anything accesses my drives like win updatesthis is my latest 51 minutes this is idle with sleep function enabled and monitor turning off but my pc just kept waking up as soon as it fell asleepHighest ISR routine execution time (µs): 2332.491154Driver with highest ISR routine execution time: hal.dll - Hardware Abstraction Layer DLL, Microsoft CorporationHighest reported total ISR routine time (%): 0.011788Driver with highest ISR total time: storport.sys - Microsoft Storage Port Driver, Microsoft CorporationTotal time spent in ISRs (%) 0.02860Highest DPC routine execution time (µs): 320202.434089Driver with highest DPC routine execution time: ntoskrnl.exe - NT Kernel & System, Microsoft CorporationHighest reported total DPC routine time (%): 0.062856Driver with highest DPC total execution time: rspLLL64.sys - Resplendence Latency Monitoring and Auxiliary Kernel Library, Resplendence Software Projects Sp.this is a brand new retail copy of windows 7 x64 with sp1ive been struggling with this for monthsive even just changed every single part with known good oneseven the motherboardit must be software relatedi remember i used to use scsiport.sys for my ssdbut now i see its storportcant i change it back somehowi suspect a conflictfind attached a copy of my system infomypc.raredit : and ive already tested all my drives no issues found with chkdisk or hitachi diagnostics seatools and also most of the time was running with just 1 drivei notice that 24mbs is constant with latencymon on my disk and when i access my disk from another tool or softwarei get a spikebut my mouse stops working randomlyand my graphics stutterive also tested my memory with both memtest x86+ and windows diagnostic tool for 10 hours each no errorsi feel like pulling my hair out Edited April 16, 2013 by haterz111 Link to comment Share on other sites More sharing options...
haterz111 Posted April 16, 2013 Share Posted April 16, 2013 (edited) i just added jmicron driver and a newer catalyst driver for my sata ports version 1.2.1.337just got 2 beeps while trying to connect remotely to my pc and my mouse stopped responding Edited April 16, 2013 by haterz111 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now