second part - installation - plz help

**juancarlos9** · September 11, 2009

hi guys,

thanx for this awesome tool!

but i do have a problem to reach the second part - get error code for e.g. hal.dll/ntoskrnl..

i think the solution is the boot.ini, but how to solve???

geometry hd0:
drive 0x80(LBA): C/H/S=121/255/63, Sector Count/Size=1943865/512
Partition num: 0, active, filesystem type is fat, partition type 0x06

geometry hd1:
drive 0x81(LBA): C/H/S=1024/255/63, Sector Count/Size=16450560/512
Partition num: 0, active, filesystem type is ntfs, partition type 0x07

thanx for your support!

Edited September 11, 2009 by juancarlos9

**ilko_t** · September 11, 2009

What do you have in boot.ini on the USB stick?

As I get it you have one partition only on the internal hard disk, where Windows is being installed to, right?

**juancarlos9** · September 11, 2009

use this:

[Boot Loader]
Timeout=20
Default=multi(0)disk(0)rdisk(1)partition(1)\WINDOWS
[Operating Systems]
C:\btsec\XPSTP.bs="1. Begin TXT Mode Setup Windows XP, Never unplug USB-Drive Until Logon"
multi(0)disk(1)rdisk(0)partition(1)\WINDOWS="Continue GUI Setup + Start XP from HD 0 - Part 1" /FASTDETECT
multi(0)disk(1)rdisk(1)partition(1)\WINDOWS="Continue GUI Setup + Start XP from HD 1 - Part 1" /FASTDETECT
multi(0)disk(1)rdisk(1)partition(2)\WINDOWS="Continue GUI Setup + Start XP from HD 1 - Part 2" /FASTDETECT
multi(0)disk(1)rdisk(1)partition(3)\WINDOWS="Continue GUI Setup + Start XP from HD 1 - Part 3" /FASTDETECT
multi(0)disk(1)rdisk(2)partition(1)\WINDOWS="Continue GUI Setup + Start XP from HD 2 - Part 1" /FASTDETECT

tested with all of this options, but doesn't work?!

Edited September 11, 2009 by juancarlos9

**ilko_t** · September 11, 2009

Did you delete ALL partitions during Setup and create a new one?

...As I get it you have one partition only on the internal hard disk, where Windows is being installed to, right?

?

**juancarlos9** · September 11, 2009

yes, i delete all partitions - i do just have on big partition and something like a partition with 8 mb

hd

-- c // ntfs

-- 8 mb free space

usb

-- u // fat - winxp setup..

Edited September 11, 2009 by juancarlos9

**ilko_t** · September 11, 2009

Are you using modified Windows, which may install in another directory, not Windows?

Zip and attach winnt.sif in ~BT folder and txtsetup.sif from USB root.

What Windows version are you installing?

**juancarlos9** · September 11, 2009

it is not modified..

winxpusb.zip

**ilko_t** · September 11, 2009

That's weird.

Do you have any USB card reader, mobile phone, iPod etc. connected to the computer being installed?

Did the Text mode part work fine, no errors, missing files etc. ?

**juancarlos9** · September 11, 2009

the text mode works fine - copy and restart..but it stop when it come to the gui part?!

this my howto - http://myeee.wordpress.com/2008/11/14/wins...-vom-usb-stick/

i'll test it with a sd-card - i dont think thats the solve..maybe??

Edited September 11, 2009 by juancarlos9

**juancarlos9** · September 11, 2009

no, it change nothing????

i installed it from a sd.card..same problem..

Edited September 11, 2009 by juancarlos9

**ilko_t** · September 11, 2009

use this:


IniWriteLine($TargetDrive & "\BOOT.INI", "Operating Systems",'c:\="-------------------------"')
					IniWriteLine($TargetDrive & "\BOOT.INI", "Operating Systems",'c:\="Try entries below if getting HAL.DLL/NTOSKRNL.EXE not found errors"')
					IniWriteLine($TargetDrive & "\BOOT.INI", "Operating Systems",'c:\="--------------------------"')
					IniWrite($TargetDrive & "\BOOT.INI", "Operating Systems","multi(0)disk(0)rdisk(1)partition(2)\WINDOWS", '"Second part of XP Professional setup from hd 0 part 2" /FASTDETECT')
					IniWrite($TargetDrive & "\BOOT.INI", "Operating Systems","multi(0)disk(0)rdisk(1)partition(3)\WINDOWS", '"Second part of XP Professional setup from hd 0 part 3" /FASTDETECT')
					IniWrite($TargetDrive & "\BOOT.INI", "Operating Systems","multi(0)disk(0)rdisk(1)partition(4)\WINDOWS", '"Second part of XP Professional setup from hd 0 part 4" /FASTDETECT')
					IniWrite($TargetDrive & "\BOOT.INI", "Operating Systems","multi(0)disk(0)rdisk(2)partition(1)\WINDOWS", '"Second part of XP Professional setup from hd 1 part 1" /FASTDETECT')
					IniWrite($TargetDrive & "\BOOT.INI", "Operating Systems","multi(0)disk(0)rdisk(2)partition(2)\WINDOWS", '"Second part of XP Professional setup from hd 1 part 2" /FASTDETECT')
					IniWrite($TargetDrive & "\BOOT.INI", "Operating Systems","multi(0)disk(0)rdisk(2)partition(3)\WINDOWS", '"Second part of XP Professional setup from hd 1 part 3" /FASTDETECT')
					IniWrite($TargetDrive & "\BOOT.INI", "Operating Systems","multi(0)disk(0)rdisk(2)partition(4)\WINDOWS", '"Second part of XP Professional setup from hd 1 part 4" /FASTDETECT')

**juancarlos9** · September 12, 2009

IniWriteLine($TargetDrive & "\BOOT.INI", "Operating Systems",'c:\="-------------------------"')
IniWriteLine($TargetDrive & "\BOOT.INI", "Operating Systems",'c:\="Try entries below if getting HAL.DLL/NTOSKRNL.EXE not found errors"')
IniWriteLine($TargetDrive & "\BOOT.INI", "Operating Systems",'c:\="--------------------------"')
IniWrite($TargetDrive & "\BOOT.INI", "Operating Systems","multi(0)disk(0)rdisk(1)partition(2)\WINDOWS", '"Second part of XP Professional setup from hd 0 part 2" /FASTDETECT')
IniWrite($TargetDrive & "\BOOT.INI", "Operating Systems","multi(0)disk(0)rdisk(1)partition(3)\WINDOWS", '"Second part of XP Professional setup from hd 0 part 3" /FASTDETECT')
IniWrite($TargetDrive & "\BOOT.INI", "Operating Systems","multi(0)disk(0)rdisk(1)partition(4)\WINDOWS", '"Second part of XP Professional setup from hd 0 part 4" /FASTDETECT')
IniWrite($TargetDrive & "\BOOT.INI", "Operating Systems","multi(0)disk(0)rdisk(2)partition(1)\WINDOWS", '"Second part of XP Professional setup from hd 1 part 1" /FASTDETECT')
IniWrite($TargetDrive & "\BOOT.INI", "Operating Systems","multi(0)disk(0)rdisk(2)partition(2)\WINDOWS", '"Second part of XP Professional setup from hd 1 part 2" /FASTDETECT')
IniWrite($TargetDrive & "\BOOT.INI", "Operating Systems","multi(0)disk(0)rdisk(2)partition(3)\WINDOWS", '"Second part of XP Professional setup from hd 1 part 3" /FASTDETECT')
IniWrite($TargetDrive & "\BOOT.INI", "Operating Systems","multi(0)disk(0)rdisk(2)partition(4)\WINDOWS", '"Second part of XP Professional setup from hd 1 part 4" /FASTDETECT')

thanks - but how do i use this? - boot.ini?

**strel** · September 12, 2009

It's explifiying your boot.ini has to be fixed. Yes.

Edited September 12, 2009 by strel

**ilko_t** · September 12, 2009

thanks - but how do i use this? - boot.ini?

Just edit boot.ini on the USB stick changing all disk(1) to disk(0).

How did it get changed in first place? What you posted is not default boot.ini...

**juancarlos9** · September 12, 2009

like this:

[boot Loader]
Timeout=20
Default=multi(0)disk(0)rdisk(1)partition(1)\WINDOWS
[Operating Systems]
C:\btsec\XPSTP.bs="1. Begin TXT Mode Setup Windows XP, Never unplug USB-Drive Until Logon"
multi(0)disk(0)rdisk(1)partition(2)\WINDOWS="Second part of XP Professional setup from hd 0 part 2" /FASTDETECT
multi(0)disk(0)rdisk(1)partition(3)\WINDOWS="Second part of XP Professional setup from hd 0 part 3" /FASTDETECT
multi(0)disk(0)rdisk(1)partition(4)\WINDOWS="Second part of XP Professional setup from hd 0 part 4" /FASTDETECT
multi(0)disk(0)rdisk(2)partition(1)\WINDOWS="Second part of XP Professional setup from hd 1 part 1" /FASTDETECT
multi(0)disk(0)rdisk(2)partition(2)\WINDOWS="Second part of XP Professional setup from hd 1 part 2" /FASTDETECT
multi(0)disk(0)rdisk(2)partition(3)\WINDOWS="Second part of XP Professional setup from hd 1 part 3" /FASTDETECT
multi(0)disk(0)rdisk(2)partition(4)\WINDOWS="Second part of XP Professional setup from hd 1 part 4" /FASTDETECT

Sign In

second part - installation - plz help

Recommended Posts

juancarlos9

ilko_t

juancarlos9

ilko_t

juancarlos9

ilko_t

juancarlos9

ilko_t

juancarlos9

juancarlos9

ilko_t

juancarlos9

strel

ilko_t

juancarlos9

Create an account or sign in to comment

Create an account

Sign in

Recently Browsing 0 members

Activity

Browse