mreska Posted February 23, 2002 Share Posted February 23, 2002 Hello,Here is my problem.... After upgrading to XP and installing the latest version of WIN DVD, when I insert a DVD into the drive, my system reboots and the XP scans my hard drive for errors every time.I have a Toshiba DVD ROM which was pre-installed on my system. Anyone else having the same problem and any suggestions/fixes? It would be greatly appreciated.ThanksMR::MOO:: ::MOO:: Link to comment Share on other sites More sharing options...
Conan Posted February 23, 2002 Share Posted February 23, 2002 By upgrading do you mean installing XP over an old OS? If this is what you did, you'll run into more problems later on. Always do a reformat and clean install when changing to a new Operating System. Link to comment Share on other sites More sharing options...
Big Booger Posted February 23, 2002 Share Posted February 23, 2002 make sure you have the most up to date drivers for your DVDROM, including any firmware revisions. Another thing is to make sure you are not using pirated software (ahem, choke, cough, puke), also make sure you have the latest winDVD for XP, including any updates or patches. If it still will not work, try using powerDVD or the built in DVD player in WINDOWS MEDIA PLAYER.Post up any further questions!Good luck,Big Booger Link to comment Share on other sites More sharing options...
zErO Posted February 24, 2002 Share Posted February 24, 2002 Have to agree with Conan & BoogsIf ur running an upgrade of xp u may have picked up issues from installing over ur previous o/s....clean install is always the better optionI use Power dvd 4 made for xp and runs fine, so does the windows media player, check ur vid drivers and get the ones that work well with ur system Link to comment Share on other sites More sharing options...
MSNwar Posted February 24, 2002 Share Posted February 24, 2002 Sounds more like the Win DVD installation was bad from the start.Where there errors "after" installing Win DVD? Where you prompted to reboot the PC for the installation to take effect?I believe you experienced a bad software installation. XP is running scan disk isn't it? I doubt you have a hardware conflict causing the reboot/scan.Conan and Big Booger are right and you should look at a clean install of XP as well as using only updated drivers, etc.You will also want to defrag the hard drive if the software installation was bad. The defrag is necessary when software installation(s) fail and scan disk is running on every system boot. Always run defrag after installing new software to keep the hard drive smooth.Last, use the system restore feature in XP. Start > Help and Support > Pick a Task > undo changes to your computer with System Restore. Then you can go back to the beginning and start over from a better position.MSNwar - The FatMan Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now