nicrmo Posted January 5, 2009 Share Posted January 5, 2009 I have an interesting problem that I am trying to resolve. I've found one other thread that discussed this and it did not offer any help. I have an XP CD with SP2 that I am using as a basis for a SP3 slipstreamed install disk. The first iteration of this worked and successfully installed XP with SP3 but moved my system drive to G:\. During install I remembered there being two entries that read "Unknown Disk There is no disk in this drive" along side my physical hard drive. My thinking is that the two "Unknown Disk" entries, plus my two CD ROMs, took up drive letters C-F and such my system was installed to G. So I've been trying to get rid of these entries to allow my system drive letter to be C:\. To test to see what was causing the entries I ran several discs with different configurations. The only way I've found to eliminate these entries is to simply slipstream SP3 into my XP install without adding any other options or drivers. The simplest configuration I've found that produced the entries had SP3 and options from other menus, but did not include supplemental mother board drivers. Does anyone know what could be causing these "Unknown Disk" entries during installation? I have included Last Session.ini for your examination. Thanks,MikeLast_Session.ini Link to comment Share on other sites More sharing options...
Ponch Posted January 5, 2009 Share Posted January 5, 2009 This is usually caused by internal card readers. Your post confirms they are "removable" drives.My thinking is that the two "Unknown Disk" entries, plus my two CD ROMs, took up drive letters C-F and such my system was installed to G.Can you not see them (letters) after install to know what they are ? Link to comment Share on other sites More sharing options...
JatinBeniwal Posted January 5, 2009 Share Posted January 5, 2009 Try to disconnect one cd rom and reinstall your OS. There is no problem with your last session.ini also check that some cables are not loose Link to comment Share on other sites More sharing options...
Guest Posted January 5, 2009 Share Posted January 5, 2009 (edited) If you have a media card reader (for SD, xD, Memory Stick, CompactFlash cards, etc.) disconnect it when installing Windows. Reconnect when finished.Also, try changing the boot order in BIOS so the desired hard drive and controller is first on the list (after the CD-ROM drive used to install Windows) if you have more than one hard drive or hard drive controller. If you can't move the desired hard drive controller to the fore then don't install any other controller's drivers until after Windows is installed.Failure to heed the advice above has resulted in my Windows drive being letter "I". Edited January 5, 2009 by 5eraph Link to comment Share on other sites More sharing options...
johnhc Posted January 5, 2009 Share Posted January 5, 2009 nicrmo, I suspect you may be able to disable the offending HW in your BIOS. It would be easier, if it works, than physically unplugging. Enjoy, John. Link to comment Share on other sites More sharing options...
nicrmo Posted January 6, 2009 Author Share Posted January 6, 2009 (edited) All, thank you for your help. The card readers were the issue. I unplugged them from the USB header and now I have a proper C:\ drive. So this make me wonder, is it possible to install XP to a CF card and if so, is it nLite or SP3 that allows it? Edited January 6, 2009 by nicrmo Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now