starcraftmaster Posted November 5, 2008 Share Posted November 5, 2008 hey i got a Intel Celeron Processor 766 MHz and replaced it with a Intel Pentium III Processor 933 MHz it works but it seems to over heat becasue the computer over heat sound goes on and its goes beep beep beep only time i heard this is when the computer is mega hot, theres no ram in the computer,theres no cpu in the computer or the computer has been left on when its frooze for a very long timehes information about the cpus Celeron Processor 766 http://processorfinder.intel.com/details.aspx?sSpec=SL4P6http://www.cpu-world.com/sspec/SL/SL4P6.htmlPentium III Processor 933http://processorfinder.intel.com/details.aspx?sSpec=SL4C9http://www.cpu-world.com/sspec/SL/SL4C9.htmland heres information about the mother boardProperty ValueManufacturer GigabyteModel i810Version 1.3ASerial Number 00000000Chipset Vendor Intel CorporationChipset Model 82810E 810e Host-Hub Interface and Memory ControllerSouth Bridge 82801AA 8xx Chipset LPC Interface BridgeSMBus Intel Corporation 82801AA 8xx Chipset SMBus Controller @04C0hCPU Intel CeleronCpu Socket Socket 370 [socket 370 ]Processor Upgrade Max CPU Speed 800 MHzSystem Slots 3 PCIOnBoard devices Video (Enabled) Intel Corporation Sound (Enabled) YAMAHA Audio Sound (Enabled) AC97 Audio <unknown> (Enabled) AC97 Modem Memory Summary Maximum Memory Module Size 512 MBytesMaximum Capacity 1024 MBytesMemory Slots 2Name Physical Memory ArrayWarning! Accuracy of DMI data cannot be guaranteed=Property ValueNumber of CPU(s) One Physical Processor / One Core / One Logical ProcessorVendor GenuineIntelCPU Full Name Intel CeleronCPU Code Name Coppermine-128KTechnology 0.18µPlatform Name Socket 370Type Original OEM processorFSB Mode SDRPlatform ID 4Microcode ID 08Type ID 0CPU Clock 768.39System Bus Clock 66.82System Clock 66.82Multiplier 11.50Original Clock 766.67Original Bus Clock 66.67Original System Clock 66.67Original Multiplier 11.50Overclock 0.22%L2 Cache Speed 768.39 MHzL2 Cache Speed FullCPU Family / Model / Stepping 6 / 8 / 6Brand ID 01L1 I-Cache 16 KBL1 D-Cache 16 KBL2 Cache 128 KBRDMSR CD400000 00000000 00000000 00000000MMX YesSSE YesSSE2 NoSSE3 NoSSSE3 NoDualCore NoHyperThreading NoIA-64 NoIntel 64 (EM64T) NoXD NoVT NoSpeedStep NoArchitecture x86Supports Intel® Celeron™ PPGA processors with 128 kb of cache. Speeds supported are 366, 400, 433, 466, 500, 533, 566, 600, 633, 667, 700 MHz and higher, with a bus speed of 66MHz packaged in a Plastic Pin Grid Array (PPGA) 370-pin module which includes processor core, 32 kbyte of first level cache and 128kb of second level cache (Pipeline Burst Static RAM). Supports Intel® Pentium® III Coppermine FC-PGA (Flip-Chip Pin Grid Array) processors. Speeds supported are 500, 550, 600, 650, 700, 750, 800, 850 MHz and faster with a clock speed of 100MHz and 600, 667, 733, 800, 867, 933 MHz and faster with a clock speed of 133MHz. The type of processor that has been pre-installed on your system, depends on the configuration you have purchased. Backward compatible with 8086, 80286, Intel386™, Intel486™, Pentium and Pentium Pro processors. Includes Intel® MMX™ media enhancement technology.Property ValueManufacturer GigabyteModel i810Version 1.3ASerial Number 00000000Chipset Vendor Intel CorporationChipset Model 82810E 810e Host-Hub Interface and Memory ControllerSouth Bridge 82801AA 8xx Chipset LPC Interface BridgeSMBus Intel Corporation 82801AA 8xx Chipset SMBus Controller @04C0hCPU Intel CeleronCpu Socket Socket 370 [socket 370 ]Processor Upgrade Max CPU Speed 800 MHzSystem Slots 3 PCIOnBoard devices Video (Enabled) Intel Corporation Sound (Enabled) YAMAHA Audio Sound (Enabled) AC97 Audio <unknown> (Enabled) AC97 Modem Memory Summary Maximum Memory Module Size 512 MBytesMaximum Capacity 1024 MBytesMemory Slots 2Name Physical Memory ArrayWarning! Accuracy of DMI data cannot be guaranteed=PCI SLOTSBus/Dev./Func. Type Class Type Manufacturer Device Name Sub System Device Vendor Sub System Device Name00 / 00 / 00 PCI PCI to HOST Bridge Intel Corporation 82810E 810e Host-Hub Interface and Memory Controller Intel Corporation 00 / 01 / 00 PCI VGA Controller Intel Corporation 82810E 810e Graphics Controller Giga-Byte Technology 00 / 30 / 00 PCI PCI to PCI Bridge Intel Corporation 82801AA 8xx Chipset Hub to PCI Bridge 00 / 31 / 00 PCI PCI to ISA Bridge Intel Corporation 82801AA 8xx Chipset LPC Interface Bridge 00 / 31 / 01 PCI Bus Master IDE controller Intel Corporation 82801AA 8xx Chipset IDE Controller Intel Corporation 82801AA 8xx Chipset IDE Controller00 / 31 / 02 PCI USB (UHCI) Intel Corporation 82801AA 8xx Chipset USB Controllers Intel Corporation 82801AA 8xx Chipset USB Controllers00 / 31 / 03 PCI SMBus Controller Intel Corporation 82801AA 8xx Chipset SMBus Controller Intel Corporation 82801AA 8xx Chipset SMBus Controller00 / 31 / 05 PCI Audio Device Intel Corporation 82801AA 8xx Chipset AC'97 Audio Controller Giga-Byte Technology SoundMAX Integrated Digital Audio00 / 31 / 06 PCI Hayes Compatible Modem Intel Corporation 82801AA 8xx Chipset AC'97 PCI Modem Giga-Byte Technology 82801AA 8xx Chipset AC'97 PCI ModemRAMProperty ValueMemory Summary Maximum Memory Module Size 512 MBytesMaximum Capacity 1024 MBytesMemory Slots 2Name Physical Memory ArrayDevice Locator Slot 1Manufacturer Micron TechnologyPart Number 4LSDT864AG-133B1Serial Number 5212F03CCapacity 64 MBytesMemory Type SDRAMData Width 64 bitsVoltage LVTTL (not 5V tolerant)Error Correction NoneRefresh Normal (15.625 µs)Manufacturing Date 2001, Week 10EPP SPD Support NoDevice Locator Slot 2Manufacturer SpecTek IncorporatedSerial Number 2357C201Capacity 128 MBytesMemory Type SDRAMData Width 64 bitsVoltage LVTTL (not 5V tolerant)Error Correction NoneRefresh Normal (15.625 µs)Manufacturing Date 2002, Week 10EPP SPD Support NoWarning! Accuracy of DMI data cannot be guaranteed= Link to comment Share on other sites More sharing options...
starcraftmaster Posted November 5, 2008 Author Share Posted November 5, 2008 could be that i dont have the right fan and heat sinkbecasue my friend only had the cpu so am just using the fan and heat sink that came with my computer Link to comment Share on other sites More sharing options...
mongo66 Posted November 5, 2008 Share Posted November 5, 2008 hey i got a Intel Celeron Processor 766 MHz and replaced it with a Intel Pentium III Processor 933 MHz it works but it seems to over heatWhen you replaced the CPU, did you clean off the old layer of thermal paste (from the PIII 933 CPU + heatsink) AND apply a new layer? If not, I suggest you invest in a tube of Arctic Silver or thermal paste of similar quality and apply it before you fry that PIII CPU... If it's still overheating, reseat the heatsink as it could be seated "improperly"... Another thing I would do is reset the BIOS to its default values. Also check to see that you have adequate case cooling as well.... theres no ram in the computer,theres no cpu ...I'm a little confused here... If there's no RAM, the motherboard should beep constantly. If there was no CPU, I wouldn't think you'd be able to hear any beeps, period. Link to comment Share on other sites More sharing options...
starcraftmaster Posted November 6, 2008 Author Share Posted November 6, 2008 its beeps about 5 times then thats all if theres no ram or no cpu or wrong cpuBUt the computer wont start up at all cant get to the bois or any thing Link to comment Share on other sites More sharing options...
Zxian Posted November 6, 2008 Share Posted November 6, 2008 You won't be able to get into the BIOS without a CPU and RAM installed. Put the old CPU and one stick of RAM in. Make sure to clean the old thermal paste from the heatsink before installing it with new thermal paste. Once you get to that point, remove the old CPU and install the new one. Again, clean the heatsink and apply new thermal paste. Link to comment Share on other sites More sharing options...
starcraftmaster Posted November 6, 2008 Author Share Posted November 6, 2008 https://kbscomputer.com/store/images/sl3xy.jpgso i put the thermal paste on the blue thing in the middle Link to comment Share on other sites More sharing options...
mongo66 Posted November 6, 2008 Share Posted November 6, 2008 https://kbscomputer.com/store/images/sl3xy.jpgso i put the thermal paste on the blue thing in the middleYes.You only need to apply a small dab (about the size of a grain of rice), then mount the heatsink. Note: Applying too much or too little thermal paste will also cause the CPU to overheat. Be sure to apply just the right amount. Link to comment Share on other sites More sharing options...
starcraftmaster Posted November 6, 2008 Author Share Posted November 6, 2008 is there a youtube video or a picture of some doing it to a pentium 3? Link to comment Share on other sites More sharing options...
weEvil Posted November 7, 2008 Share Posted November 7, 2008 is there a youtube video or a picture of some doing it to a pentium 3?I don't think so. You might be out of luck.Can anyone tell me how to change the tire on a Mazda? I only know how to do it on a Chevy.I'm stuck you guys. Link to comment Share on other sites More sharing options...
starcraftmaster Posted November 8, 2008 Author Share Posted November 8, 2008 lolan sure theres some thing on the internet about that lol Link to comment Share on other sites More sharing options...
Sysdll Posted November 8, 2008 Share Posted November 8, 2008 One of the best things you can do when upgrading old computers beyond what they were designed for is to keep them cool. Treat it like it’s a state of the art game machine. Open the case and put a put a fan on the floor next to it if necessary. And a 300 watt and above power supply can also help an old machine. Link to comment Share on other sites More sharing options...
FthrJACK Posted November 8, 2008 Share Posted November 8, 2008 Theres plenty such videos on youtube: http://uk.youtube.com/watch?v=xekr6eQL62U&...feature=relatedBut basically, clean the cpu with some alcohol and a cotton swab. make sure you get all the old thermal grease off.put a small blob of thermal compound on your CPU core (in your case, yes the little raised square) about the size of a large grain of rice should do it for a p3.now, using a credit card, spread the thermal grease over the rest of the core, keep the layer of grease uniform in thickness and make sure it covers the whole core, you dont want any dry pockets in there. the layer should be just thick enough to cover the core over, without being able to actually see the core under it, about 0.5 mm thick.Now place your heatsink onto the cpu, keeping it flat, otherwise you will smudge the compound off the core and undo what you just did!i still have a few Piii's kicking about somewhere... heh Link to comment Share on other sites More sharing options...
starcraftmaster Posted November 9, 2008 Author Share Posted November 9, 2008 ah looks like it needed themal pastethe p3 is working great now thanks guys Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now