hfslip-1.7.8 --->BSOD setupdd.sys

[Floppy]

Hey

I have hfslip-1.7.8 and wmp11 and SP3, and XP Pro and I have tried to do the slipstream.

But during xp instal I get BSOD reffering to setupdd.sys.

Have tried to slipstream sevral times + new DVD's and tried it on Virtual Pc--> Same result!

Can some one help me with some clue's?

HFSLIP.txt

Edited October 19, 2008 by Floppy

[fdv]

This is likely not an HFSLIP issue... it's a bad RAM issue. (No, seriously!)

Try running memtest, or swapping out modules and trying new ones.

[jvidal]

if it also crashes in a VM, then it's NOT a RAM issue...

[Geej]

I'm looking at your list against my list

May I suggest

directx_jun2008_redist.exe to be located at HFSVCPACK

WindowsXP-KB941569-x86-NOR.exe to be located at HFSVCPACK_SW1

There may be some truth about bad ram but I'm not expert in this

Can also try setting your virtual PC ram above 128mb

[Floppy]

I'm looking at your list against my list

May I suggest

directx_jun2008_redist.exe to be located at HFSVCPACK

WindowsXP-KB941569-x86-NOR.exe to be located at HFSVCPACK_SW1

There may be some truth about bad ram but I'm not expert in this

Can also try setting your virtual PC ram above 128mb

Thankyou for your answer!

Iam quit sure that this is not a mem problem. Tried on 2 Pc's and one laptop.

According to "Windows XP SP3 updates for use with HFSLIP" the files chould be where I put them....

But Iam trying your sugestions now

Will be back

Edit: New Log file, new atemp.

HFSLIP.txt

Edited October 20, 2008 by Floppy

[Floppy]

Later!

No Go.

Xp runs the gui part of the instalation begins, then BSOD ---> setupdd.sys.

[Geej]

I dun know what is the real problem but just for info

I have in my HFTOOLS folder (U have none):

7za.exe

boot.bin <----- U may be missing this

cWnd.exe

EXTRACT.EXE

HFANSWER.INI

mkisofs.exe <----- possibly this

modifyPE.exe

and my HFCABS folder has only 1 file: wbemoc.cab whereas u have 5 files.

Maybe some members can advice too

Realised directx_jun2008_redist.exe can be included in HF (Mine was a reworked version in silent exe downloaded long ago, so I have placed in HFSVCPACK)

Since there is no driver to slipstream, u can reduce HFSLIP runtime from 12 min to about 7 min by selecting option D, E or F (Better still, set your driver.cab option using HFANSWER.INI). I had mine running option F (with some driver files) and took me about 8 mins to complete running HFSLIP

Edited October 20, 2008 by Geej

[Floppy]

Hey

I thougt that the "Windows XP SP3 updates for use with HFSLIP" was a complete list...?

I dont use Hfslip to create an image.....I use CDIMAGE.EXE to do that.

[fdv]

Well, try putting a SP2 (two) setupdd.sys into SOURCESS\i386 and see if that works in your VM...?

Worth a shot.

FDV, travelling on business

[Floppy]

Are the WINNT.SIF the same after as before Sp3 ??.......

I created a new WinNt.sif with nlite(WinXp & Sp3)....and now .....it works

Edited October 21, 2008 by Floppy