install loop issue

[mopgcw]

I was able to successfully create the image file, with n-lite and wmp11 slipstreamer for a new XP disc from my original OEM XPSP1 disk, everything seemed to work like a champ.

burned the iso with nlite to a clean dvd, and no problems reported.

to test it all out, I then create a new VPC machine and "boot" it from the DVD. go through the install/format questions, and it reboots ok to the XP set-up part -- you know the section that says 39 minutes left.... So far so good.

Then when it hits the network set-up section, it re-boots and starts the whole process over.

I would greatly appreciate any pointers to how to get it over this little hiccup.

thanks

George

Edited July 17, 2008 by mopgcw

[Guest]

To save you DVDs, I'd recommend "Create Image" in the Bootable ISO menu and then testing with that image in your VPC.

I'm afraid I don't know how to solve your problem though.

[kingsc]

I haven't used the WMP11 Slipstreamer yet.

Try it without WMP11 Slipped and see your results, then you'll know the culprit.

[mopgcw]

Thanks Guys, let me try just creating and SP3 slipstream and install it from an image to VPC. and go from there.

take care

George