signal64 Posted February 13, 2008 Share Posted February 13, 2008 (edited) I wanted to add the Intel ICH9R RAID drivers and not having much luck.Prior to running USB_MultiBoot2, I created Textmode directory under $OEM$Copied iastor.inf, iastor.sys, iastor.cat, and txtsetup.oem to Textmode directoryAdded the following to winnt.sif[MassStorageDrivers]"Intel® ICH8R/ICH9R SATA RAID Controller" = OEM[OEMBootFiles]iaStor.infiaStor.sysiaStor.catTxtsetup.oemI keep getting a BSOD after the storage drivers load in the text mode install.I used USB_MultiBoot2 with a USB Stick.I've successfully installed from a generated image before, but this is the first time trying to add the RAID drivers.Am I going about this the right way? Edited February 13, 2008 by signal64 Link to comment Share on other sites More sharing options...
ilko_t Posted February 13, 2008 Share Posted February 13, 2008 (edited) Please look here, from post #8 and below:http://www.msfn.org/board/Issues-Setup-t111989.htmlYou have the option to use txtsetup.sif, search on msfn.org, there are number of how-to's, or simply use BTS mass storage drivers pack. Edited February 13, 2008 by ilko_t Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now