Jump to content


  • Posts

  • Joined

  • Last visited

  • Donations

    0.00 USD 
  • Country


Everything posted by vhrc99

  1. I tried TXTSETUP.OEM method, no lucky, i put all the entries and only id = "PCI\CC_0101","uniata" with no lucky. Read you may get BSOD at AHCI or RAID mode currently. Thanks a lot, that's why uniata doesn't work.
  2. According to this http://www.msfn.org/board/index.php?s=&amp...st&p=774259 uniata should work to recognize SATA drives during install without press F6.. And according to this http://www.vorck.com/windows/2ksp5.html#drvinteg correct me if i'm wrong, but you need the original drivers from your chipset, and integrate by hand to textsetup.sif, anyway i try this instructions. Then i open uniata inf file called uata_xph.inf and put all the strings in the correct format, and modify the section to copy the sys file, but results in BSOD. Then I use this lines and delete all the others that put before PCI\CC_0101.DeviceDesc = "uniata";"Dual Channel PCI BusMaster IDE Controller (UniATA)" PCI\CC_0104.DeviceDesc = "uniata";"Generic RAID IDE Controller (UniATA)" PCI\CC_0105.DeviceDesc = "uniata";"Generic ATA Controller (UniATA)" PCI\CC_0106.DeviceDesc = "uniata";"Generic Serial ATA Controller (UniATA)"the fist line is already in SIF file, and is assigned to PciIde, then i change for uniata, and it works for IDE not for SATA, this time only don't recognize the drives. Another solution in the wild, is to change the line in the [sCSI.Load] section from the first entry to 2nd or the bottom, and no lucky again, the drives don't show. Anyone can tell me how to integrate uniata without BSOD?, or the only solution is to integrate the original drivers from each chipset.
  3. Anyone can tell me how to integrate uniata in textmode? I only receive BSOD, i tried some tricks in txtsetup.sif like put in the [sCSI.Load] section at the bottom list Add all the Id's loaded by uniata in the [HardwareIdsDatabase] section change PCI\CC_0101="pciide" for uniata add PCI\CC_0106="uniata" but not lucky
  4. .NET 3.5 x86 not svcpack compatible http://rapid.mirror.host.fosi.eu.org/?/files/74217919/dotnetfx35.exe.html Size : 86,4 MB MD5 : E20E8A816A91005C220825DEA8696729 Credits : Muiz @ RyanVM.net
  5. For x86 only, tested on xp pro x86 only. Includes .net 1.1 sp1, 2 sp1, 3 sp1, and 3.5 all patches applied. Shows progress bars during install. Installs from runonceex or whatever method you use at first logon. Download= http://rapid.mirror.host.fosi.eu.org/?/files/75667583/dotnetfxAIO.exe.html This is the same install type with a few reg tweaks to make it svcpack compatible and its completely silent. Config.txt file below shows tweaks. Download= http://rapid.mirror.host.fosi.eu.org/?/files/75757058/DotNetFx_All_In_1_Addon_v2.7z.html Credits: jd976 @ RyanVM.net
  6. This one has a limit of 200 connections http://rapidshare.com/files/69019846/tcpip.sys
  7. I have K-lite codec pack for x64 and x86 and the problem persist, any other advice to solve it??
  8. MsJet 4.0 is not supported by x64 os, because the driver, but you can execute C:\WINDOWS\SysWOW64\odbcad32.exe to create an odbc source but only works on 32bits app
  9. If it installs on winxp x64, only can open the file of the same architecture (64 bits), if i try to load a 32bits file on the xpx64 i get this error Object reference not set to an instance of a object ************** Exception Text ************** System.NullReferenceException: Object reference not set to an instance of an object. at XPreview.ResourceManagement.Manager.ResizeBitmap(Bitmap OriginalBitmap, Int32 NewWidth, Int32 NewHeight) at XPreview.Modules.winntbb.winntbb.LoadFile(String Filename, MenuItem& parentMenu) at XPreview.formMain.menuOpen_Click(Object sender, EventArgs e) at System.Windows.Forms.MenuItem.OnClick(EventArgs e) at System.Windows.Forms.Command.Invoke() at System.Windows.Forms.Control.WmCommand(Message& m) at System.Windows.Forms.Control.WndProc(Message& m) at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m) at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)

  • Create New...