opensurf

I hope the following change (RED) in listviewex.c could solve the problem. I have used sourcecode 2.1.9.3: ... int ListViewExSetCheckState(HWND hLv, LV_EX_ITEM* Item, LV_EX_STATE State) { LV_EX_ITEM *Parent, *Child; Parent = ListViewExGetParent(hLv, Item); if (Parent && Parent->Flags & LVEXF_GROUP) { Child = Parent->Next; while (Child) { if (Child->Indent <= Parent->Indent) break; if (Child->Indent == Item->Indent) { Child->CheckState = 0; Child = Child->Next; if (Child->Prev != Item){ while (Child && Child->Indent > Item->Indent) { Child->CheckState = 0; Child = Child->Next; } } } else Child = Child->Next; } } Item->CheckState = State; return 1; } ... CU, opensurf

The group.x works fine, but if choice one has subcommands (with checkboxes) and i choose option two, the subcommands of option one remains selected. It's possible to deselect the subcommands of option one when i select option two? Example: ... description.1=Adobe Acrobat Reader command.1=* group.1=1 description.1.0=Acrobat Reader 5.1 command.1.0=AcroReader51_DEU_full.exe description.1.1=Acrobat Reader 6.0.2 description.1.1.0=Update auf v6.0.2 description.1.1.1=Photoshop Album 2.0 Starter Edition command.1.1=AdbeRdr60_deu_full.exe -p"/v\"/qn\"" command.1.1.0=Acro-Reader_6.0.2_Update.exe /v/qn command.1.1.1=psa201se_ger.exe /v/qn file.1.1.0=%ProgramFiles%\Adobe\Acrobat 6.0\Reader\AcroRd32.exe?6.0.2.126 hidden.1.1.0=1 ... When i deselect both options, the item "Adobe Acrobat Reader" should always be disabled, if possible. Thx, opensurf

@Benjamin The problem still exist, but i possible know the problem: - when i start WIHU with commandline /skipsettings, in the programcode the variable "UseCurrent" is always set to 1 - but when i start WIHU without commandline and skipsetting=1 is activatet in [settings], the userdialog is always skipped, but "UseCurrent" isn't set to 1. Could this the problem? CU

where should i use /verbose=0? Commandline would only accept /verbose. I want only suppress the subcommand of one item and not for all subcommands. EDIT: sorry, i have found /verbose=<level> in the Changelog CU

additionally i removed the complete sections [users]. The programs should be installed with the currently logged in user and i didn't want add additional users. Now i get the message "Fehler 87, Installation von "Just open calculator" konnte nicht gestartet werden: Falscher Parameter.C:\WINNT\system32\calc.exe" again. Thx, opensurf

Thx for quick response, but now i get the following message: "Fehler 1326, Installation von "Just open calculator" konnte nicht gestartet werden: anmeldung fehlgeschlagen: unbekannter Benutzername oder flasches Kennwort. C:\WINNT\system32\calc.exe. I used your install.ini and activated "skipsettings=1" and called wihu.exe without parmaters and selected only "Just open calculator". CU

anything that do the job is for me ok CU

@t-o-m-m-y i don't know exactly what you want, but i use inimod.exe in batchfiles(http://ww2.netnitco.net/users/cruth/claysutl.html) to change values within inifiles. CU, opensurf

Wishtread for WIHU - multiple commands per softwareitem Example: ... description.1=Windows Media Player 9 (+ Hotfix Q819639, Q828026, Q837272) command.1=cmd.exe /c Windows\wmp\mpsetupxp.exe Q /R:N command.1a=Windows\wmp\WindowsMedia-Q828026-x86-DEU.exe /passive /o /n /z command.1b=Windows\wmp\WindowsMedia9-KB837272-DEU.exe /passive /o /n /z command.1c= .... - log-entry in [settings] additional environment variables (time and date) which i can use for unique logfilenames: log=c:\wihu\logs\%computername%_%username%_%date%_%time%.log - chekc file against filedate and string check if the file in file.x.y is newer, older or equal a date or if the file contains a string like findstr in DOS - move thread "Changelog" to Important Topcis if it's possible? - store size of windows thx for resizable windows . Initial values of size and position (in install.ini) would be nice or the last size and position is stored in an additional inifile and restored by next call of WIHU - Tooltips per softwareitem - disable softwareitems in depence of OS-type Windows Media Player 9.0 for XP and W2K has different setups (mpsetupxp.exe and setupxp.exe) - Toggle i will make an installation for different office and java versions and only one version should be selectable - Favorites my install.ini has many entries and i would make a section with favorites links to existing programs in other sections. I didn't want du duplicate the entries, because the user could install the program twice. ... [Favorites] description.0=[utilities]description.0 description.1=[Windows]description.1 description.2=[Viewer]description.0 [utilites] description.0=Winzip [Windows] description.0=Media Player description.1=Office description.2=DirectX [Viewer] description.0=Irfanview ... Thx, opensurf

i want do simulate "multiple commands" for one softwareitem ".NET Framework 1.1 (incl. deutsches Sprachpaket)", which installs netfx.msi and langpack.msi, therefore i hide "command.3.0" with "hide.3.0=1". The second command should be excuted, but not shown in the "Software Dialog" and "Installation Dialog". With "description.3.0=Something", Something would be shown in the "Installation Window". At present (workaround) i write cmd-file with these two commands. CU, opensurf

Hi Benjamin, i have testet the new settings in [settings] (thanks for skipsettings and resizable probertysheets!). When "skipsettings" in [settings] isn't used anything work's fine, but when i activate "skipsettings=1" in your install.ini, i get an errormessage "Fehler 87, Installation von "Just open calculator" konnte nicht gestartet werden: Falscher Parameter.C:\WINNT\system32\calc.exe". I selected only "Just open calculator" and called wihu.exe without parmaters. Thx

inside the started cmd.exe (first three lines) i get the following messages: CMD.EXE wurde mit "\\hostname\share\WIHU" als aktuellem Verzeichnis gestartet. UNC-Pfade werden nicht unterstützt. Stattdessen wird das Windows-Verzeichnis als aktuelles Verzeichnis gesetzt.

%temp% is only an example. Best solution would be a startdirectory for every command or a general startdir for all commands. Only for cmd.exe would a startdir be nice, because of ugly startmessage. Thx

i have less experience in programing, but isn't it possible to check the Cmd if it start's with cmd.exe and if yes, then replace CurDir with %TEMP%? wihu.c: ... if (LogonWithNewName == 0) { /* Install as current user (i.e. Administrator) */ Result = CreateProcess(NULL, Cmd, NULL, NULL, FALSE, 0, 0, CurDir, &sti, π); } else { Result = CreateProcessWithLogonW(UserName, NULL, UserPassword, LOGON_WITH_PROFILE, NULL, Cmd, 0, NULL, CurDir, &sti, π); } ...

Hi, i inserted a section for Movie Maker 2.0, but the fileversion shouldn't recognice the installed version of Movie Maker? ... ; Sub command 4 description.4=Movie Maker 2.0 (nur Windows XP!) command.4=msiexec.exe /i %WIHU%\Windows\MovieMaker\mm20.msi /qn file.4.0=%ProgramFiles%\Movie Maker\wmm2ae.dll?2.0.3312.0 ... Thx, opensurf

when i start WIHU with an UNC-Path and the started program within WIHU is cmd.exe, ... ; Sub command 1 description.1=Windows Media Player 9 (+ Hotfix Q819639, Q828026, Q837272) command.1=cmd.exe /c %WIHU%\Windows\wmp\setup.cmd file.1.0=%SystemRoot%\System32\wmp.dll?9.0.0.3128 ... i get the following errormessage in the DOS-Environment: CMD.EXE wurde mit "\\hostname\share\WIHU" als aktuellem Verzeichnis gestartet. UNC-Pfade werden nicht unterstützt. Stattdessen wird das Windows-Verzeichnis als aktuelles Verzeichnis gesetzt. It's possible to start cmd.exe with %TEMP% if WIHU is started with UNC-Path? Thx

i have tested for ... ; Sub command 3 description.3=.NET Framework 1.1 (incl. deutsches Sprachpaket) command.3=msiexec.exe /i software\netfx.msi /qb command.3.0=msiexec.exe /i software\langpack.msi /qb selected.3=0 hidden.3.0=1 ... but when i select ".NET Framework 1.1" and execute, i get the message: ".NET Framework 1.1 (incl. deutsches Sprachpaket)" ausgeführt. "<missing discription>" ausgeführt. Installation ist beendet. It's possible to suppress '"<missing discription>" ausgeführt.' or other solution for my problem? Thx, opensurf

Hi, i have inserted DirectX 9.0c into WIHU: ... description.2=DirectX 9.0c Multilingual command.2=%WIHU%\Windows\DirectX\dxsetup.exe /silent key.comparison.2=and key.2.0=HKLM:Software\Microsoft\DirectX\Version?>4.09.00.0904 key.2.1=HKLM:Software\Microsoft\DirectX\InstalledVersion?!0x0000000009000000 ... With WIHU i get the errormessage "DirectX 9.0c Multilingual, wurde mit Code 1 beendet. Grund: Unzulässige Funktion.", but DirectX 9.0c is correctly installed. I have tested with Windows XP (previous DirectX 4.08.01.0810) and Windows 2000 (previous DirectX 4.08.00.0400). I have always tested with DirectX 9.0b (dxsetup.exe /windowsupdate), but the same errormessage. Thx, opensurf

Hi Benjamin, today i found your fantastic WIHU on these board. I tested it and it would be nice, if you could implement the following enhancements: 1.) Tooltips inside softwaredialog 2.) Resizable softwaredialog (with listview of programs) 3.) Option /SkipSettings as default in install.ini (wihu.exe could then be started directly) 4.) Disable "Reboot" switch in install.ini 5.) multiple commands for one software (like project WPI) 6.) start program in dependce of OS (W2K or XP), or disable programs in dependce of OS. Example is Windows Media Player mpsetupxp.exe for XP and mpsetup.exe for W2K Thx, opensurf

Switch /S works fine, but it'st possible to install silent without DivX Pro Trial? Thx

I want only a silent installation of the basic DivX 5.2 (with Player) for a coporate unattended installation CD! CU

Hi, it's possible to install DivX 5.2 (DivX52XP2K.exe) silent, with Player but without DivX Pro Trial? Are there any commandline parameters? Thx