I am pretty sure, that it will work with the 6.70 package, if you put all extra needed files (NVATABUS.INF, NVATA.CAT and NVCOI.DLL) into the SATARAID subfolder prior to the integration. This would even be better than the easy method with the LEGACY subfolder, because you have the CAT files present, which enforce the correct installation of the drivers (SYS files). If you want to do the same with the package 6.82, there is only one problem: Within the newest nForce chipset driver packages you won't find a file named NVATABUS.INF (but a very similar file named NVATA.INF within the SATA_IDE subfolder). If you copy this file into the SATARAID subfolder, the necessary driver NVATABUS.SYS - although it is present in the SATARAID folder - will not be found by the installation routine, because the NVATA.INF points to a driver named NVATA.SYS, which is not present within the SATARAID folder. In this case you have 3 options to get a correct installation of all needed SataRaid drivers: 1) You copy both NVATA files (NVATA.INF and NVATA.SYS) from the SATA_IDE into the SATARAID subfolder (I am not sure, if it works, because the "normal" name for the nForce Sata Controller driver layed down in the SIF files is "NVATABUS.SYS"). 2) you open the NVATA.INF with the editor, search for "NVATA.SYS" and rename it to "NVATABUS.SYS" or 3) you take a NVATABUS.INF from another chipset package (if you want you can edit the correct driver version and date). Hope, that this is help enough. CU Fernando Thanks Fernando. Will see what I can do.