Jump to content

alexthetechie1

Member
 View Profile  See their activity

  • Posts

    17

  • Joined

  • Last visited

  • Donations

    0.00 USD 

  • Country

    United States

 Content Type 

Everything posted by alexthetechie1

  1. alexthetechie1
    can you guide me thru this pls?
  2. alexthetechie1

    heyo

  3. alexthetechie1
    I have successfully installed windows 7 on an i5-13400F and GTX 960 4GB everything works except windows experience index ( fails at testing memory ) and my ethernet controller ( intel ethernet connection (17) i219-V ) WiFi does work but is very slow due to being far from the router anyone have a custom ethernet driver? ive listed my hardware IDs bellow
  4. alexthetechie1
    thank you ill try it out
  5. alexthetechie1
    PCI\VEN_8086&DEV_1A1D&SUBSYS_1A1D1849&REV_11\3&11583659&0&FE
  6. alexthetechie1
    anything requiring the Rockstar Games launcher most likely will require windows 10
  7. alexthetechie1
    1440x900 just enters sleep mode (monitor says digital input entering power save) now it only boots in safe mode but ive resorted to windows ME and same thing
  8. alexthetechie1
    could i replace the RTX 4060 8GB with a GTX 960 4GB i have laying around? and could you possibly link a driver for my ethernet if i have the lucky variant?
  9. alexthetechie1
    Hello i currently have a pretty modern pc i'd like to attempt to get windows 7 on i have booted into the installer just to see if it boots and it does (CSM boot only) Just wanting to verify i can get things working before i install Motherboard: ASRock B760M-C/D4 Ram: 32GB DDR4 2133MHz (4x 8GB DDR4) CPU: 13th Gen i5-13400F 2.5Ghz 10 cores 16 threads GPU: RTX 4060 8GB Storage: 2x 1TB M.2 / NVme SSD's and 1x 2TB SATA SSD Ethernet: Intel(R) Ethernet Connection I219-V Wi-Fi: Intel(R) Dual Band Wireless-AC 3168 BT: Intel(R) Wireless Bluetooth(R) Audio: High Definition Audio Device
  10. alexthetechie1
    it still does not work for me
  11. alexthetechie1
    yea ME was better on older hardware / hardware designed for it. 98SE ran fine with no drivers whatsoever but after each driver was installed it became more unstable - occasionally booting into safe mode randomly , refusing to shut down / randomly it would power itself off when entering sleep mode (then engaging scandisk) maybe its the Pentium 4 but who knows
  12. alexthetechie1
    I tried that i just get a black screen at boot, I'm probably just going to stick with windows ME, it seems to work a lot better and no need for the "Setup /p i" setup switch at the beginning in DOS
  13. alexthetechie1
    DVI - Dell S199FWP GeForce 6200 256MB PCI DDR2 DX9
  14. alexthetechie1
    the graphics driver works (ver. 82.69) however 1440x900 which is native for my monitor doesn't work it just puts my monitor to sleep 1360x768 works on a 1440x900 monitor but doesn't look that sharp sadly
  15. alexthetechie1
    So when setting up Windows 98 I entered this into the dos prompt after formatting drive C setup /p i And I also have over 512mb of ram (1015mb) which boots fine but I installed the ram patch just to prevent issues ill keep you posted if this works
  16. alexthetechie1
    The GeForce 6200 was brand new in box plus it works just fine on XP and 2000 This is what i get in device manager: "This device cannot find any free Input/Output range (I/O) resources to use (code 12)"
  17. alexthetechie1
    Dell Dimension 2400 Specs.txt I am trying to install windows 98 SE on my DD 2400 (specs listed above) i can get everything to work except the GPU (Onboard GPU works if there is no PCI GPU card Installed at all) the cards ive tested were "GeForce2 MX 400 64MB PCI" and "GeForce4 MX 4000 128MB PCI" occasionally id get a "windows protection error" after messing around with Resources / conflicted I/O in device manager then installing the Nvidia driver (version 82.69 unofficial) ive even tried 81.98 (official) still no luck Current PCI GPU: EVGA Nvidia GeForce 6200 PCI 256MB DDR2 any suggestions??
  18. alexthetechie1
    I was wondering if I can successfully install windows 7 on an Acer nitro V with mostly all the drivers fully functioning I’ve gotten it to install partially in the past but it locks up on “starting windows” after first reboot and first boot off the m.2 Specs: Intel Core i5-12500H 3.10Ghz 12th Gen 12 Cores Alder Lake Intel Iris Xe Graphics 128MB BIOS VRAM 8129MB Total VRAM NVIDIA GeForce RTX 3050 Laptop GPU 4096MB OS: 1TB M.2 SSD WD Green Backup: 1.92TB SATA Lexar SSD 16GB DDR4 (2x 8GB DDR4) Killer E2600 Gigabit Ethernet Controller Killer Wi-Fi 6 AX16501 160MHz Realtek HD Audio
×
×
  • Create New...