PitKoz

Hi OK came to such a stage that LAN are not responding for drivers, and trying to boot EFI but getting sound and sign that system is logged, but the screen stays with logo not fluctuating/static, can close system with power button it means that system is working behind the logo screen. There is something about VGA and UEFI in context to Win 7, but can not find something clear enough to dare attempt to modifications. CSM is working OK.

I guess the procedure is the same download drivers from windows cat or intel and mod inf removing part of the lines and voila it is installing. Here is how:

We are still talking about win 7 and 225v net cards? So, how to check SHA-2 ? The other KB-s I have set on 99% I will check all next time I go to W7.

Thank You for showing interest to help me. In Compatibility mode I have now 3 screens with systems to chose first is completely odd, so links are not valid at all second is very long has empty managers links and valid links to systems and 3rd one with all valid links in BIOS there is only one boot disk/partition designated to start it is NVMe Samsung directly attached to CPU Visual bcd editor shows this: and easyBCD: This UEFI for multi boot systems is a bit tricky... so far did not decipher the multilayer design of it Any idea where to start this clean-up? All Advices will be appreciated.

What updates you think about: NET 4.8 or something else? Still can not make them work...

I have some very old soft on my 20 years old PC Workstation. Starting with # inch Ninja funny game. Some desktop bugs/worms or dwarf or hamster screensavers and more And big collection of very old CD with free soft. Love Recoil game. The best tank game ever

Nice big job!!! Thanks for your efforts and congratulations on making a live working thing "It's alive!. It's Alive!!"

What is "stub" ?

I guess there is big problem rising with MS which never liked multisystem configuration, and legacy and UEFI has separate BCD-s in different locations I guess the problem is with bios which reads legacy and UEFI BCD from the boot partition despite it was ordered to read only UEFI Legacy is starting so slow... I guess it does no matter to you, as your PC is not this complicated as mine. You can always boot both modes, no matter how all was setup, for Windows 7 we need only win7 UEFI loader in BCD boot folder, as UEFI 10 loader is not loading win 7. After sorting all systems will simplify it much. Got too much computer for now, Yesterday finally managed tricky fresh installation of LTSC 21H2, tricky as it looks like it can be only cloned or setup with upgraded image, The installation got all drivers from working copy and did not implement them into setup, so it was all the time result InaccessibleBootDevice. Inserted missing F6 drivers with DriverStoreExplorer.v0.11.92... Cheers

I have to thank you again, and you will not believe that I have such allergy to post 7 OS, that the only system I was forcibly made to use is 10 NTSC Enterprise. And this system recently had partially collapsed during moving to new PC LMFAO... Now trying to revive it to full health, all OFC due to MS mentally corrupted devs who follow-up Corpo sell sell sell 11... I really hate the 10 and do not even think what dung will be implemented in 11. All those mistakes imported from pre NT even, not user focused interface, metrics problems and drifting to Stupidphone interacting procedures. All those systems are "a huge, expensive machines for blowing out candle" So we are, about Windows 7, brothers from different mothers Now disconnected all hardware from PC will try again in-place-install-repair.... I would set new LTSC and move all from old, but it seems like it is not really possible. Failed also twice. Maybe you will know what to do with something like "ghost UEFI system boots", I have one M.2 now but during classic start have like 3 screens with non-working BCD links... 3rd screen is showing live systems...maybe later will show what I think about making photos during boot. For now, good night and good luck.

OMG you are so helpful and active in this forum, it is really exceptional! --The board is Gigabyte Z590 Vision C rev 1 : https://www.gigabyte.com/Motherboard/Z590-VISION-D-rev-10#kf Latest Bios is F8 a bit better than previous ones. --Trying to start UEFI 7 in next stage. --Now upgrading LTSC 10 21H2 ... some errors in distributed elements, the most important is CryptServ looking like destroyed. "Faulting application name: svchost.exe_CryptSvc, version: 10.0.19041.1566, time stamp: 0x1f37eb46 Faulting module name: bcryptPrimitives.dll, version: 10.0.19041.1415, time stamp: 0xe9d3d417 (this version of DLL is not recognized in any search) Exception code: 0xc0000006 Fault offset: 0x0000000000053dfc Faulting process id: 0x3028 Faulting application start time: 0x01d98fd1653e2ab3 Faulting application path: Z:\Windows\system32\svchost.exe Faulting module path: Z:\Windows\System32\bcryptPrimitives.dll Report Id: f1a7d434-6d0f-4ed4-8cd6-dce4d5e16667 Faulting package full name: Faulting package-relative application ID:" --PCI Simple Communication was kind of common case for Windows 7 Have to log in to win 7 to give you IDS, will do it in a few hours. --What you think about, SDIO_x64_R753? At some stage was trying to use it for updating drivers to LTSC and system was bricked. Restored it from Macrium image. It looks like it has some updates for Win7, but did not use it yet. Will be back later.

Hi again, maybe... maybe... some more drivers missing from the list? Will appreciate it very much good treat is waiting

Thanks a million, will come to win 7 soon, now on LTSC subject, it seems that we can not install LTSC 21H1 nor 20H1 nor earlier on new hardware PC without modding. In site upgrade is not working either. IDK what is going about it, but it seems like all nerds involved in MS have sold their souls, work for Corpo and nothing is working as expected for users, but works for MS. Is 11 so tempting to have? I doubt.

Can you reshare this again, plz?

What is SDIO ? Sorry for plain question but really new there... and in need for 7-x64