buseeliu

You can also try to buy a USB Lan Adapter.

Maybe there is some problem in the bios of your motherboard, you may try to update the bios. On the other hand, Which anti -virus software you are using currently?

You have to check whether the network environments are set properly such as workgroup name and ip address(if applicable)

On the other hand, you can try to clear all cookies & temporary internet file(including offline content) in IE & try to download it again. Acutally, i also suggest you to use download manager since the file size is too big. There are more options in downloading file.

thks for your kind reply. I have tried to uninstall the f-secure internet security and i am able to use vpn client. Thks a lot.

Are you sure your cd is bootable ? Furthermore, have you check whether your cdrom drive is okay?

when i try to start the vpn client, the computer restarts automatically. After finish restarting i've got the following error message : Error 51 : The VPN Client failed to create an inter-process communication socket in order to communicate with the service/daemon. VPN connections cannot be established/terminated via the GUI. Refer to Related Information for link to search on Cisco bug ID CSCed05004. How can i solve the problem? please kindly advise. Thks a lot

I will try to use flash drive instead of notebook harddisk , i have use some software to test the reading/writing speed between the notebook harddisk & pqi flash drive, i find out that the reading performance is better for using pqi flash drive.

Furthermore, i want to know the hardware configuration of colore's computer.

Have you installed any Anti-virus Software?

have you tried to update the audio driver ?

it seems to be very interesting , i will try it after my friend lends me another usb flash drive (corsair), thks for your effort .

Actually, i have tried to use notebook harddisk to install window xp by using the above method. but it fails. If i use the above code in migrate.inf , i can't not install window xp and there is a warning message that my harddisk c:(should be the drive of the stick) has been damaged. cannot continue setup window anymore, press any key to exit. If i use CDOB's Script, i can continue to setup window even copying temporary file to 3.5" harddisk, however when the PC restarts, there is a warning that ntldr is missing. If i copy ntldr manually to that 3.5" harddisk, i can enter ther screen of installing win xp , however , further warning message is prompt that my setup file is missing. \globalroot\hardiskvolume2\xxxx. How can fix it? I think using notebook hdd to installing xp is faster than using flash drive. Thks for all of your effort again.

I think the main problem is my usb 2.0 stick is not fast enough , if i copy file to notebook harddisk through, the speed is very fast. Maybe i need to buy another high speed usb stick later. Thks for your advice.

my effort is too small actually, just want to help each other within my ability.

In step 8, Undo_Ren.CMD Should change back to undoren.cmd in order to match Step 6

Wish you have a nice trip. Waiting for your back.

Thks for your effort again. I will try your method two days later since i am too busy currently. Furthermore, Can i you use this method to install xp if i want to use usb notebook harddisk? Thks for your good & professional advice.

I thinks this method is for Installing Window VISTA from USB Flash drive.

@ilko_t I had amended the BOOT.INI and i was able to install WINDOW XP From the flash drive successfully. Your method is very good. However, the procedure of deleting temporary file at the last 1 mintue is extremely slow. I need to spend around one hour to finish this process. Do i make any mistake again? Thks for your help.

i think the main problem is related to your networking. Pls. provide more information about your networking environment including routers/hubs/ethernet card

Yep, also if you write (without the underscores): [_quote_] This is a quoted sentence. [_/quote_] you get: but if you write (again without the underscores) [_quote=jaclaz_] This is a quoted sentence, and the author is shown between parenthesis. [_/quote_] you get: jaclaz Thks for your teaching.

@ilko_t Yes, i think i has made the mistake on this boot.ini file. I will try it again at tomorrow. My motherboard is Gigabyte M55plus-S3G/AM2 and it supports USB2.0. On the other hand, my flash drive is kingston DTI 2G (Datatraveler) and it also supports usb 2.0. I really don't understand where is my mistake. I think it is a very serious problem for the slow copying speed. I really want to find out the reason. Sorry for my pooring quoting. I have amended it and thks for your nice helping.

ilko_t i just have one IDE 40G Hdd with one partition. I just want to intall the window in Drive C and i haven't unplugged my USB stick copy NTDETECT.COM, NTLDR & CUSTOMISED BOOT.INI during the first logon, when should i copy these files & from where i should copy them from? After you have pass through the welcome to installing window screen, they will ask you to select "Install" , "repair" , " Exit", Once you select 'install", then the setup procedure will try to detect your existing Hard drive. Select the drive and format it as ntfs or fat. Then the temporary setup file will begin to copy to the harddisk . This procedure is very slow. Just like smartdrv not yet loaded. The temporary setup file just copy one by one and you can clearly see every filename that is being copied at the bottom of the right hand side . If you are using normal window setup cd to install xp, you can't see every filename since the process of copying file is very fast. I had encountered this situation before. When i am using command prompt(booted by Win98 floppy disk) to install window xp by running winnt without smartdrv loaded. Hope the above information is detail enough and you can understand my problem. Thank you so much.

Try to clear CMOS from your motherboard and test the system again.