Solid as a rock Posted August 12, 2006 Share Posted August 12, 2006 Let me be clear: you have updated/registred your own powerdvd? After finishing this you have exported these keys? [HKEY_CURRENT_USER\Software\Cyberlink\PowerDVD][HKEY_CURRENT_USER\Software\Cyberlink\PowerDVD\BuildInfo][HKEY_CURRENT_USER\Software\Cyberlink\PowerDVD\Color_Control][HKEY_CURRENT_USER\Software\Cyberlink\PowerDVD\UserReg]If your answer is yes. i am afraid i cant help you...Well I have exported and them all but used only [HKEY_CURRENT_USER\Software\Cyberlink\PowerDVD], since that is where all the registration information seemed to be listed.Thanks for your help.SanjayThere is also cdkey writed in [userReg], so please export this key too, and let me know if this works for you Link to comment Share on other sites More sharing options...
Sanjay Posted August 12, 2006 Share Posted August 12, 2006 (edited) There is also cdkey writed in [userReg], so please export this key too, and let me know if this works for youThanks again for your reply but I don't see my key in the 'UserReg'.The following are the contents of the exported 'UserReg' portion.[HKEY_LOCAL_MACHINE\SOFTWARE\CyberLink\PowerDVD\UserReg]"SR_No"="DVD060620-08""Prod_Name"="PowerDVD""Prod_Ver"="7.0""CustomerNO"="2581""Hardware"="""Channel"="iSales""RegVType"="Trial (with Dolby)"Anyhow, I will try this also and see. Edited August 12, 2006 by Sanjay Link to comment Share on other sites More sharing options...
Solid as a rock Posted August 12, 2006 Share Posted August 12, 2006 There is also cdkey writed in [userReg], so please export this key too, and let me know if this works for youThanks again for your reply but I don't see my key in the 'UserReg'.The following are the contents of the exported 'UserReg' portion.[HKEY_LOCAL_MACHINE\SOFTWARE\CyberLink\PowerDVD\UserReg]"SR_No"="DVD060620-08""Prod_Name"="PowerDVD""Prod_Ver"="7.0""CustomerNO"="2581""Hardware"="""Channel"="iSales""RegVType"="Trial (with Dolby)"Anyhow, I will try this also and see.i means this "SR_No"="DVD060620-08"Dont know if it make any sense, also you better export ALL keys i have pointed. If it isnt working, you dont have to try another time Link to comment Share on other sites More sharing options...
cyberloner Posted August 12, 2006 Share Posted August 12, 2006 make normal install of it.... enter all serial as normal register...export all registry from HKEY_LOCAL_MACHINE\SOFTWARE\CyberLinkand HKEY_CURRENT_USER\Software\Cyberlinkcombine them if u understand what i mean...import then after silent installation of powerdvd... i never have this problem....dun forget about powerdvd sim file if you are using xpowerdvd =) Link to comment Share on other sites More sharing options...
bluejazz74us Posted August 12, 2006 Share Posted August 12, 2006 make normal install of it.... enter all serial as normal register...export all registry from HKEY_LOCAL_MACHINE\SOFTWARE\CyberLinkand HKEY_CURRENT_USER\Software\Cyberlinkcombine them if u understand what i mean...import then after silent installation of powerdvd... i never have this problem....dun forget about powerdvd sim file if you are using xpowerdvd =)kk, I did the following:I installed the application then I registered it manually, then I browesed to the TWO keys you mentioned and exported the entire key, so now I have TWO registery fleNow I opened a blank document and named t powerdvd.regI copied all entries from both TWO files and paste it in the file, there were some entries has NO values under it, so I removed itbut NOTHING CHANGED what could be wrong Link to comment Share on other sites More sharing options...
Solid as a rock Posted August 12, 2006 Share Posted August 12, 2006 make normal install of it.... enter all serial as normal register...export all registry from HKEY_LOCAL_MACHINE\SOFTWARE\CyberLinkand HKEY_CURRENT_USER\Software\Cyberlinkcombine them if u understand what i mean...import then after silent installation of powerdvd... i never have this problem....dun forget about powerdvd sim file if you are using xpowerdvd =)kk, I did the following:I installed the application then I registered it manually, then I browesed to the TWO keys you mentioned and exported the entire key, so now I have TWO registery fleNow I opened a blank document and named t powerdvd.regI copied all entries from both TWO files and paste it in the file, there were some entries has NO values under it, so I removed itbut NOTHING CHANGED what could be wrongWhat about powerdvd.sim? Have you copied that too? Link to comment Share on other sites More sharing options...
bluejazz74us Posted August 12, 2006 Share Posted August 12, 2006 What about powerdvd.sim? Have you copied that too?You mean to copy and over write this file after installation? Link to comment Share on other sites More sharing options...
Solid as a rock Posted August 12, 2006 Share Posted August 12, 2006 What about powerdvd.sim? Have you copied that too?You mean to copy and over write this file after installation?Ah, it is already included? Now, we have to wait to other people who knows a solution Link to comment Share on other sites More sharing options...
bluejazz74us Posted August 12, 2006 Share Posted August 12, 2006 Yespeople like muiz, roughspear, ryan, ...etcsure there is some one must know about it Link to comment Share on other sites More sharing options...
muiz Posted August 13, 2006 Share Posted August 13, 2006 (edited) Yespeople like muiz, roughspear, ryan, ...etcsure there is some one must know about itSure its very easy....First unpack power dvd setup to a folder.Then install and register it, also the plugins if you have those.Then go to your power dvd folder and copy the "PowerDVD.sim" file to the folder wher you extracted your setup.Then export the following reg key :REGEDIT4[HKEY_LOCAL_MACHINE\SOFTWARE\CyberLink\PowerDVD]"Header"="Deluxe""HasCDKEY"=dword:00000001"InstalledPacks"="CPRM Pack, DivX Pack, DTS Pack, DTS 96/24 Pack, DVD-Audio Pack, Express Pack, Interactual Pack, Mobility Pack, MPEG4 AVC Pack" "UI_PMK"="xxxxx-xxxxx-xxxxx-xxxxx-xxxxx-xxxxx""UI_RMK"="xxxxx-xxxxx-xxxxx-xxxxx-xxxxx-xxxxx""TEST"=dword:00000000"KeyUpdate"=dword:00000002"CPNav"=dword:00000002"MustUpdateKey"=dword:00000002(xxxx stands for your own keys)i named it : "PowerDVD7.reg"Now copy that reg file in the same folder as where you extracted your setup.In the folder withe the extracted setup open the "Custom.ini" fileand add this :silent=1GoogleToolbar=0You can now remove the google toolbar folder.And make a SFX file with those files , like this :;The comment below contains SFX script commandsSetup=Setup.exePresetup=REGEDIT /S PowerDVD7.regTempModeSilent=1Overwrite=1You van give it your own icon with winrar.Now your switcheless silent powerdvd is ready. Edited August 13, 2006 by muiz Link to comment Share on other sites More sharing options...
cyberloner Posted August 13, 2006 Share Posted August 13, 2006 nice rar tricks.... thanks ... learn something new for my installer again lol Link to comment Share on other sites More sharing options...
Solid as a rock Posted August 13, 2006 Share Posted August 13, 2006 (edited) Yespeople like muiz, roughspear, ryan, ...etcsure there is some one must know about itSure its very easy....First unpack power dvd setup to a folder.Then install and register it, also the plugins if you have those.Then go to your power dvd folder and copy the "PowerDVD.sim" file to the folder wher you extracted your setup.Then export the following reg key :REGEDIT4[HKEY_LOCAL_MACHINE\SOFTWARE\CyberLink\PowerDVD]"Header"="Deluxe""HasCDKEY"=dword:00000001"InstalledPacks"="CPRM Pack, DivX Pack, DTS Pack, DTS 96/24 Pack, DVD-Audio Pack, Express Pack, Interactual Pack, Mobility Pack, MPEG4 AVC Pack" "UI_PMK"="xxxxx-xxxxx-xxxxx-xxxxx-xxxxx-xxxxx""UI_RMK"="xxxxx-xxxxx-xxxxx-xxxxx-xxxxx-xxxxx""TEST"=dword:00000000"KeyUpdate"=dword:00000002"CPNav"=dword:00000002"MustUpdateKey"=dword:00000002(xxxx stands for your own keys)i named it : "PowerDVD7.reg"Now copy that reg file in the same folder as where you extracted your setup.In the folder withe the extracted setup open the "Custom.ini" fileand add this :silent=1GoogleToolbar=0You can now remove the google toolbar folder.And make a SFX file with those files , like this :;The comment below contains SFX script commandsSetup=Setup.exePresetup=REGEDIT /S PowerDVD7.regTempModeSilent=1Overwrite=1You van give it your own icon with winrar.Now your switcheless silent powerdvd is ready.open the "Custom.ini" fileand change this: Richvideo=1 to Richvideo=0 (since richvideo.exe is a needless program when you only use PowerDVD to watch movies. If you use more Cyberlink Programs it could be usefull.)"Edit: Oh by the way, remove the folder richvideo too... Edited August 13, 2006 by Solid as a rock Link to comment Share on other sites More sharing options...
bluejazz74us Posted August 13, 2006 Share Posted August 13, 2006 Yespeople like muiz, roughspear, ryan, ...etcsure there is some one must know about itSure its very easy....First unpack power dvd setup to a folder.Then install and register it, also the plugins if you have those.Then go to your power dvd folder and copy the "PowerDVD.sim" file to the folder wher you extracted your setup.Then export the following reg key :REGEDIT4[HKEY_LOCAL_MACHINE\SOFTWARE\CyberLink\PowerDVD]"Header"="Deluxe""HasCDKEY"=dword:00000001"InstalledPacks"="CPRM Pack, DivX Pack, DTS Pack, DTS 96/24 Pack, DVD-Audio Pack, Express Pack, Interactual Pack, Mobility Pack, MPEG4 AVC Pack" "UI_PMK"="xxxxx-xxxxx-xxxxx-xxxxx-xxxxx-xxxxx""UI_RMK"="xxxxx-xxxxx-xxxxx-xxxxx-xxxxx-xxxxx""TEST"=dword:00000000"KeyUpdate"=dword:00000002"CPNav"=dword:00000002"MustUpdateKey"=dword:00000002(xxxx stands for your own keys)i named it : "PowerDVD7.reg"Now copy that reg file in the same folder as where you extracted your setup.In the folder withe the extracted setup open the "Custom.ini" fileand add this :silent=1GoogleToolbar=0You can now remove the google toolbar folder.And make a SFX file with those files , like this :;The comment below contains SFX script commandsSetup=Setup.exePresetup=REGEDIT /S PowerDVD7.regTempModeSilent=1Overwrite=1You van give it your own icon with winrar.Now your switcheless silent powerdvd is ready. Welldone, a full time job, I think you should work as a doctor coz every thing seems easy and has a way matethanks Link to comment Share on other sites More sharing options...
muiz Posted August 13, 2006 Share Posted August 13, 2006 (edited) Richvideo=1 to Richvideo=0Sorry i forgot that 1 And if you use skins you can set the skin you want by : UISkinPath=Mercury.dllJust put the name of your skin dll there @cyberlonernice rar tricks.... thanks ... learn something new for my installer again lolI dont like 7zip installers , cause most of the time they dont set up in the original directory and cant be uninstalled.And most 7zip's are english here , and i use a dutch Windows.Winrar supports all switches , so why not use it.90% of my apps are installed by winrar. Edited August 13, 2006 by muiz Link to comment Share on other sites More sharing options...
Solid as a rock Posted August 13, 2006 Share Posted August 13, 2006 Richvideo=1 to Richvideo=0Sorry i forgot that 1 And if you use skins you can set the skin you want by : UISkinPath=Mercury.dllJust put the name of your skin dll there Thanks for the tip... Would it be usefull when i use the PRESETUP to run Powerdvd.cmd and write in Powerdvd.cmd to remove the folders "trial" and "ORLsubmission" and run the regtweaks offcourse? By this way you never will see the registerpopup (which ask your name and more)? Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now