How to integrate Asus P5B Deluxe Drivers?

[leeland]

OK this will probably be one of the more noobish questions I have had but I want to attempt to slipstream in the drivers for my Sound and onboard LAN using nLite and cannot figure out how to do it. I have searched all over and cannot figure out what to do after I download the drivers from ASUS's website.

I have downloaded both:

Marvell Yukon Gigabit Ethernet Driver V8.56.7.3

SoundMAX Audio Driver v5.10.01.6110 DTS

and unzipped them. They have AsusSetup.exe's which extract and install the drivers...ect. I cannot figure how to use that driver and nLite together so they are slipstreamed into the disk (i.e. I don't have to install the drivers after installing windows)...

Can someone please give me some direction in detail as to wtf I am doing wrong cause I am going nuts trying to figure how to extact the drivers so I can slipstream them via nLite.

Any help is appreciated greatly.

Thanks,

Leeland

Edited May 12, 2007 by leeland

[boooggy]

easy way is to install them normally and then use a backup driver software.

[IrfCore]

I have a similar MB Asus P5B-V

I extract everything with Universal Extractor

For SoundMAX Audio Driver you only need the folder SMAXWDM\W2K_XP

Make sure you integrate KB888111 for it to work.

If you don't have it, it's probably included in the SoundMAX Audio Driver zip file, or search the forum.

I assume you are on WinXP then you need for Marvell Yukon Gigabit Ethernet Driver only these:

yk51x86.cat

yk51x86.inf

yk51x86.sys

I also include:

yk51x86.txt

yk51x86.htm

Hope it helps.........

[leeland]

I have a similar MB Asus P5B-V

I extract everything with Universal Extractor

For SoundMAX Audio Driver you only need the folder SMAXWDM\W2K_XP

Make sure you integrate KB888111 for it to work.

If you don't have it, it's probably included in the SoundMAX Audio Driver zip file, or search the forum.

I assume you are on WinXP then you need for Marvell Yukon Gigabit Ethernet Driver only these:

yk51x86.cat

yk51x86.inf

yk51x86.sys

I also include:

yk51x86.txt

yk51x86.htm

Hope it helps.........

Thanks for the info man I appreciate it, I did as you said...not 100% because nLite would only allow me to select one of the Marvell Yukon drivers you listed for integration so I hope it works

I will let you know if it does and post my steps that I preformed.

leeland