RIS 2003 and 3com 3c940 problem

[staun]

Been working with RIS for some time now, but facing severe problems with 3com's integraded network 3c940 on Asus P4C800 motherboard.

RIS works fine in text-mode - installation starts but when the system reboots and suposed to run unattended it stops with the unknown graphic-drivers. This is (in my expericence) due to missing network-drivers being loaded.

In the device-manager the network-drivers are not installed. The "funny" part is then, when I use the exact same drivers in the $oem$ folder from a USB-stick the network-drivers works execellent.

Another thing is that the $oem$-drivers folder is not copied to the local installation, which it should be.????

Anyone got the 3c940-drivers working with RIS?? if so, which drivers are used to do this.

Thanks in advance

Staun

Edited February 27, 2007 by staun

[JimBobUK]

RIS works fine in text-mode - installation starts but when the system reboots and suposed to run unattended it stops with the unknown graphic-drivers. This is (in my expericence) due to missing network-drivers being loaded.

I my experience if u have the wrong NiC drivers it will tell you wrong NiC, if you have wrong graphic drivers it will tell you wrong graphic drivers...!

[staun]

Yes, that is correct . But the drivers for the network-adapter isn't loaded, which I think is why it cannot load the graphic drivers from the network.