omeneghe Posted January 6, 2007 Share Posted January 6, 2007 I have integrated the driver for LSI MegaRaid Express 500, but at system partition selection I can only see the sata disk... Before I'm using the RVM Italian Update Pack 2.1.5.c that prevent the F6 screen form appear ( a problem with KB902845 ita), so I can install on the scsi disk , if I install Windows on sata disk at first logon the scsi card is installed and scsi disk is ready to use.Now I'm integrating normal hotfix and the scsi driver, at the system partition selection I cant see the scsi disk with integrated driver, but if I press F6 and load driver from floppy Windows tell me that there already is a driver for this hardware and if a tell it to load driver from floppy I can install Windows on the scsi disk.Investigating I have found that on [HardwareIdsDatabase] of txtsetup.sif there isn't the ID for the scsi card (but the ID for Sata controller is present), all the other sections seems to be ok for scsi driver loading except for the absence of the scsi ID.With nLite I have removed Windows xp scsi driver, is it the problem?Or is a problem with scsi driver integration?ThanksPS I'm Italian and I have to study english...Thanks Nuhi for your great work! When I have time I try to manually add the scsi ID to txtsetup.sif and tell yuo if work, it's about I week that I'm working with a friend's PC (scsi problem resolved via floppy driver, but a lot of problem with TV card, non nLite related)ULTIMA_SESSIONE.INI Link to comment Share on other sites More sharing options...
Speeddymon Posted January 7, 2007 Share Posted January 7, 2007 You are most likely correct. Try removing components first, then in a separate session add your driver, and it should work. Link to comment Share on other sites More sharing options...
omeneghe Posted January 28, 2007 Author Share Posted January 28, 2007 I try to remove components and add driver in separate sessions, but the LSI IDs aren't added on [HardwareIdsDatabase] section of txtsetup.sif...I have tried to integrate Adpatec Ultra 160 series driver and the IDs are correctly added.So the problem is with LSI driver (but with floppy is ok...) , the 2 inf file seems to be ok, but on txtsetup.oem there is for each scsi card:[HardwareIds.scsi.MegaRAID1CH]MegaRAID1CH = "PCI\VEN_101E&DEV_1960&SUBSYS_0475101E", "mraid35x"If I change the line to (like the Adpatec driver):[HardwareIds.scsi.MegaRAID1CH]ID = "PCI\VEN_101E&DEV_1960&SUBSYS_0475101E", "mraid35x"The ID is correctly added! nLite doesn't recognize the IDs if they are specified in LSI way Thank you Speeddymon for your help Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now