nLited 1.3 RC w2k setup hangs at "configuring network"

[Raiker]

Well, i have a completly up to date and ultra slipstreamed w2k source (via HFslip) that installs without problems on one of my machines. after the machine name and workgroup comes the date & timezone setting. and then should come the network config. but when i press next (or siguiente in my case) i get nothing, it hangs there. A previous source just like this one had been nLited with about the same settings and drivers and installed on the machine i'm writting this, but since i didn't label the dvds i was using i found myself with 10 dvds with the same nlite installation, so i decided to improve the build and re burn it.

i had removed a lot of services and other things but they are back in and the installation still hangs.

EDIT: i'm making a nlite installation which only has a driver added and the serial added. i'll see if that hangs too.

ULTIMA_SESI_N.INI

Edited January 4, 2007 by Raiker

[Raiker]

I really need some help with this, i have a updated w2k but i'd like to make all the improvements that nlite allows me to... this is the .ini i used just now:

if i switch nlite to english can i nlite my spanish w2k the same?

Edit: I switched to nLite 1.3 RC and got the same results, it's obvious i'm doing something wrong here but i don't see where. if switching to english would help you i will switch it and post another.ini

edit2: the english version gives you an idea of what my build is, i have not selected all the options i used on the spanish one, like disabling services, just to see if it changes anything. it seems i'll have to go back and test all 14 versions of the install dvd to see how it was that it worked.

The only thing i changed from the time i made my working dvd is the hfslip version, but i highly doubt it has anything to do...

ULTIMA_SESI_N.INI

Last_Session.ini

Edited January 4, 2007 by Raiker