Switch configuration

[zahir270]

Here i got problem to configure vlan on switch. VTP mode for switch3 is server while switch1 and switch2 are client. What i understand is if you want to create vlan, your vtp mode should be server but when i changed vtp mode for switch1 to server, then the configuration occured same with switch2 i.e.vlan 2 on switch1 for interface fa0/2 also configured automatically with same interface(int fa0/2) on switch 2.Since before this i used single switch for inter-vlan but nothing problem.So, do u know what i'm missing on this configuration or misunderstanding?I attached file for diagram and configuration.

*using Boson software

inter_vlan_config.txt

[chilifrei64]

a couple of things..to be totally honest wit you .. i cannot gather what you are trying to accomplish.. but

Ensure your uplink ports are untagged which means they do not care about vlans and just forward the information.

and

My personal opinion is I dont think any site does a better job at explaining switching and routing better than this one

http://www.routeralley.com/ra/guides.html

check out the VLAN's and VTP document.. see if it is any help.