Jeroeneke Posted September 6, 2006 Share Posted September 6, 2006 (edited) Topic title is quite clear... I do not understand why this is .. ?Full installation runs @ 1024, first boot is also 1024, but when I reboot, then the resolution is reverted to 640...quite strange, and quite irritating... Somebody knows what I am doing wrong ?PS:WINNT.SIF:[Display] BitsPerPel=32 Xresolution=1024 Yresolution=768 Vrefresh=60 AutoConfirm=1HIVESYS.INF:[AddReg]HKLM,"SYSTEM\CurrentControlSet\Services\VgaSave\Device0","DefaultSettings.BitsPerPel",0x00010001,32HKLM,"SYSTEM\CurrentControlSet\Services\VgaSave\Device0","DefaultSettings.XResolution",0x00010001,1024HKLM,"SYSTEM\CurrentControlSet\Services\VgaSave\Device0","DefaultSettings.YResolution",0x00010001,768HKLM,"SYSTEM\CurrentControlSet\Control\Video\{23A77BF7-ED96-40EC-AF06-9B1F4867732A}\0000","DefaultSettings.BitsPerPel",0x00010001,32HKLM,"SYSTEM\CurrentControlSet\Control\Video\{23A77BF7-ED96-40EC-AF06-9B1F4867732A}\0000","DefaultSettings.XResolution",0x00010001,1024HKLM,"SYSTEM\CurrentControlSet\Control\Video\{23A77BF7-ED96-40EC-AF06-9B1F4867732A}\0000","DefaultSettings.YResolution",0x00010001,768 Edited September 7, 2006 by Jeroeneke Link to comment Share on other sites More sharing options...
Ctrl-X Posted September 6, 2006 Share Posted September 6, 2006 What does the AutoConfirm=1 in your winnt.sif mean? I can't find any reference to this in the documentation. I'd leave out the registry entries you mentioned in hivesys.inf if I were you; as far as I know these shouldn't be necessary and may very well be the cause of the problem. Link to comment Share on other sites More sharing options...
Jeroeneke Posted September 6, 2006 Author Share Posted September 6, 2006 The reg keys are used to make the installation running at 1024 My winnt.sif is quite old (for about a year now) so I have kind of forgotten what it means, will search for it, if I don't find anything, I will delete it I will test an installation without those reg keys and see what it does. But if I do that, the instalaltion runs at 640, first boot will also be 640, so I don't think I will see it by this... Link to comment Share on other sites More sharing options...
urie Posted September 6, 2006 Share Posted September 6, 2006 What does the AutoConfirm=1 in your winnt.sif mean? I can't find any reference to this in the documentation. I'd leave out the registry entries you mentioned in hivesys.inf if I were you; as far as I know these shouldn't be necessary and may very well be the cause of the problem.AutoConfirm=1This will disable the really annoying box the appears upon first logon if the resolution wasn't properly set. It's the popup that says your current resolution isn't correct for Windows XP. Link to comment Share on other sites More sharing options...
Ctrl-X Posted September 6, 2006 Share Posted September 6, 2006 AutoConfirm=1This will disable the really annoying box the appears upon first logon if the resolution wasn't properly set. It's the popup that says your current resolution isn't correct for Windows XP.I see, thanks! Can't find any information about this option in the Preinstallation Reference though... After a bit of searching I'm guessing this is a leftover option from the Windows NT 4.0 days? Link to comment Share on other sites More sharing options...
PaulIA Posted September 6, 2006 Share Posted September 6, 2006 I've been trying to get rid of that pesky window for two weeks now. Can't help you with the resolution problem, but thanks for the AutoConfirm tip! Link to comment Share on other sites More sharing options...
VCC Posted September 6, 2006 Share Posted September 6, 2006 (edited) It sounds to me that the AutoConfirm may actually be the problem in this case though. If you change the video back to the higher res. will it stay there after a couple of reboots? Edited September 6, 2006 by VCC Link to comment Share on other sites More sharing options...
Jeroeneke Posted September 6, 2006 Author Share Posted September 6, 2006 Yes, when I changed it manually, the resolutions stays at all other boots Should I test without AutoConfirm ? Link to comment Share on other sites More sharing options...
VCC Posted September 6, 2006 Share Posted September 6, 2006 Well, unless someone else has a better idea, I would say, "Yes, try it without that setting." Although, it does sound like a helpful setting otherwise.Another suggestion would be (just for troubleshooting) to try kicking down the BitsPerPel=32 to 24 rather than 32. Or remove the Vrefresh=60, maybe try a lower setting there, maybe 70 or 75. You could be pushing it to hard in the beginning. I know that's the idea, but something is not liking that idea much. Link to comment Share on other sites More sharing options...
Jeroeneke Posted September 6, 2006 Author Share Posted September 6, 2006 Well, unless someone else has a better idea, I would say, "Yes, try it without that setting." Although, it does sound like a helpful setting otherwise.Another suggestion would be (just for troubleshooting) to try kicking down the BitsPerPel=32 to 24 rather than 32. Or remove the Vrefresh=60, maybe try a lower setting there, maybe 70 or 75. You could be pushing it to hard in the beginning. I know that's the idea, but something is not liking that idea much.I think you have misread a bit, it's 60Hz I have (nog 80 )Reason therefore is that I install on a laptop which only have 60Hz screens (in most cases). I will try it out whithin some minutes, and will let you know the result Link to comment Share on other sites More sharing options...
Jeroeneke Posted September 6, 2006 Author Share Posted September 6, 2006 Tested it without that line in WINNT.SIF, and there wasn't any difference in the installation... Everything stayed the same...My guessing is, that something hapens at the first boot with the resolution settings (I have a small software installation at first boot too). Something that makes the standard resolution back to 640*480 or something ? Somebody can confirm ? Link to comment Share on other sites More sharing options...
mazin Posted September 7, 2006 Share Posted September 7, 2006 Full installation runs @ 1024, first boot is also 1024, but when I reboot, then the resolution is reverted to 640...This happened to me on a DELL INSPIRON 1300.Resolution was set to 800x600 in WINNT.SIF and in a reg tweak (at T-13), too.I haven't put AutoConfirm=1 in WINNT.SIF nor I edited hivesys.inf, either.After Windows finishes its SETUP (T-9 and beyond) and reboots, the Administrator account gets logged on automatically.Some apps are installed, two user accounts are created, and some tweaks & cleaning are done. The computer reboots again.The computer logs on the first user account automatically.Some apps are installed, and some tweaks & cleaning are done. The computer reboots again.The computer logs on the second user account automatically.Some apps are installed, and some tweaks & cleaning are done. The computer reboots again.NB: HKLM\..\RUN is used to launch a CMD to do all the above for each user account.So, I SAW each user's DESKTOP set to 800x600!!Now, it's time for the logon screen to come up where a user must click his name and type his password in.At the logon screen, resolution is set to 640x480. I couldn't have an overall view of the logon screen.I could hardly click the second user name and type the paasword in.Well! The second user is finally logged on. And, its DESKTOP is also, 640x480!!!I could, manually, change the resolution back to 800x600. (from Display Properties)And 800x600 sticks for all user accounts, afterwards.Looking for a permanent solution, the first thought to come to my mind is to open the Device Manager.Surprisingly, there's no Display Adapter defined under Device Manager!There's an undefined Video Controller (of yellow question mark), instead.What I did was that I installed S/W driver for the Video Controller. I took a shot to collect installed files.I added those files to a new UACD and tested again. And the problem is solved.HTH Link to comment Share on other sites More sharing options...
Jeroeneke Posted September 7, 2006 Author Share Posted September 7, 2006 Thx!I must say I didn't test it on my laptop, only on Virtual machines...I'm planning an install one of thes days and will let you know if it worked (video driver is already integrated in my UAXP disk) Link to comment Share on other sites More sharing options...
Jeroeneke Posted September 7, 2006 Author Share Posted September 7, 2006 Just did a clean install on my laptop and everything is OK now!Thx everyone who helped me Link to comment Share on other sites More sharing options...
Acheron Posted July 5, 2008 Share Posted July 5, 2008 (edited) As I posted this Video Resolution Windows Setup tweak several years ago I did not monitor the registry closely. While testing on VMWARE is different from a real system it was annoying to see the display get set at 640x480 after second reboot. So at last here is a fixed version of this tweak:;Disable Screen Resolution balloon tip HKCU,"Software\Microsoft\Windows\CurrentVersion\Explorer\DontShowMeThisDialogAgain","ScreenCheck",0x0,"no";Change default resolution to 1024x768x32 HKLM,"SYSTEM\CurrentControlSet\Hardware Profiles\Current\System\CurrentControlSet\Control\VIDEO\{23A77BF7-ED96-40EC-AF06-9B1F4867732A}\0000","Attach.ToDesktop",0x10001,0x1 HKLM,"SYSTEM\CurrentControlSet\Hardware Profiles\Current\System\CurrentControlSet\Control\VIDEO\{23A77BF7-ED96-40EC-AF06-9B1F4867732A}\0000","DefaultSettings.BitsPerPel",0x10001,32 HKLM,"SYSTEM\CurrentControlSet\Hardware Profiles\Current\System\CurrentControlSet\Control\VIDEO\{23A77BF7-ED96-40EC-AF06-9B1F4867732A}\0000","DefaultSettings.XResolution",0x10001,1024 HKLM,"SYSTEM\CurrentControlSet\Hardware Profiles\Current\System\CurrentControlSet\Control\VIDEO\{23A77BF7-ED96-40EC-AF06-9B1F4867732A}\0000","DefaultSettings.YResolution",0x10001,768 HKLM,"SYSTEM\CurrentControlSet\Hardware Profiles\Current\System\CurrentControlSet\Control\VIDEO\{23A77BF7-ED96-40EC-AF06-9B1F4867732A}\0000","DefaultSettings.VRefresh",0x10001,0x1 HKLM,"SYSTEM\CurrentControlSet\Hardware Profiles\Current\System\CurrentControlSet\Control\VIDEO\{23A77BF7-ED96-40EC-AF06-9B1F4867732A}\0000","DefaultSettings.Flags",0x10001,0x0 HKLM,"SYSTEM\CurrentControlSet\Hardware Profiles\Current\System\CurrentControlSet\Control\VIDEO\{23A77BF7-ED96-40EC-AF06-9B1F4867732A}\0000","DefaultSettings.XPanning",0x10001,0x0 HKLM,"SYSTEM\CurrentControlSet\Hardware Profiles\Current\System\CurrentControlSet\Control\VIDEO\{23A77BF7-ED96-40EC-AF06-9B1F4867732A}\0000","DefaultSettings.YPanning",0x10001,0x0 HKLM,"SYSTEM\CurrentControlSet\Hardware Profiles\Current\System\CurrentControlSet\Control\VIDEO\{23A77BF7-ED96-40EC-AF06-9B1F4867732A}\0000","DefaultSettings.Orientation",0x10001,0x0 HKLM,"SYSTEM\CurrentControlSet\Hardware Profiles\Current\System\CurrentControlSet\Control\VIDEO\{23A77BF7-ED96-40EC-AF06-9B1F4867732A}\0000","DefaultSettings.FixedOutput",0x10001,0x0 HKLM,"SYSTEM\CurrentControlSet\Hardware Profiles\Current\System\CurrentControlSet\Control\VIDEO\{23A77BF7-ED96-40EC-AF06-9B1F4867732A}\0000","Attach.RelativeX",0x10001,0x0 HKLM,"SYSTEM\CurrentControlSet\Hardware Profiles\Current\System\CurrentControlSet\Control\VIDEO\{23A77BF7-ED96-40EC-AF06-9B1F4867732A}\0000","Attach.RelativeY",0x10001,0x0 Edited July 5, 2008 by Acheron Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now