Nlite 1.0.1 Fnal do not integrate massdrive storage

[vaxxo]

Italian Language

my txtsetup.sif

...

[SCSI]
sparrow  = "Scheda SCSI Adaptec AHA-151X/AHA-152X/AIC-6X60"
aha154x  = "Scheda host SCSI Adaptec AHA-154X/AHA-164X"
aic78xx  = "Controller SCSI Adaptec AHA-294X/AHA-394X/AIC-78XX"
aic78u2  = "Controller SCSI Adaptec AHA-294XU2/AIC-7890"
adpu160m = "Scheda PCI SCSI Adaptec AIC-789X/AHA-3960 Ultra160"
afcnt = "Controller PCI Agilent HHBA-510x a fibra ottica"
dpti2o = "Controller SCSI RAID Adaptec 2000S/3000S Ultra160"
afc9xxx = "Controller PCI 2Gbit 64-bit/66MHz Adaptec AFC-9210G"
asc3550  = "Scheda host SCSI Advansys 3550 Ultra Wide"
asc3350p = "Scheda host SCSI Advansys ABP460 PCMCIA"
abp480n5 = "Scheda host SCSI Advansys ABP480 CardBus"
asc	  = "Scheda host SCSI Advansys"
amsint   = "Controller PCI/Scheda Ethernet SCSI AMD"
mraid35x = "Controller RAID AMI MegaRaid"
cpqarray = "Array di unit… Compaq"
cpqfcalm = "Controller host Compaq a fibra ottica"
cpqarry2 = "Controller Smart Array Compaq"
cpqcissm = "Controller Smart Array 5300 Compaq"
lp6nds35 = "Schede host Emulex LP6000 fibra ottica"
cd20xrnt = "Unit… CD-ROM PCMCIA portatile IBM"
ipsraidn = "Scheda IBM ServeRAID"
nfrd960	 = "Scheda IBM ServeRAID"
i2omp	= "Controller I/O Intelligent"
atapi	= "Controller IDE CD-ROM (ATAPI 1.2)/PCI"
cbidf2k = "Driver Miniport IDE CardBus/PCMCIA"
ini910u  = "Scheda host SCSI Initio Ultra"
dac2w2k = "Controller Raid Mylex EXR2000,3000/AR160,170,352"
dac960nt = "Controller Raid Mylex DAC960/Digital SWXCR-Ex"
ultra  = "Controller IDE Ultra Promise Technology Inc."
ql1240   = "Scheda host SCSI QLogic ISP 1240"
ql10wnt  = "Scheda host SCSI PCI QLogic"
ql1080   = "Qlogic QLA1080, a 64 bit PCI LVD SCSI HBA"
ql1280   = "Qlogic QLA1280, a 64 bit PCI LVD SCSI HBA"
ql12160  = "QLogic QLA12160, 64 bit PCI DUAL 160M SCSI HBA"
ql2100   =  "Scheda PCI QLogic QLA2000/QLA2100 a fibra ottica"
ql2200   =  "Scheda PCI QLogic QLA2200 a fibra ottica"
sym_hi   = "Scheda host PCI SCSI LSI Logic C896"
sym_u3   = "Scheda host PCI SCSI LSI Logic C1010"
symc810  = "Scheda host PCI SCSI LSI Logic C8100"
symc8xx  = "Scheda host PCI SCSI LSI Logic C8xx"
symmpi   = "Scheda host PCI a fibra ottica LSI Logic"
hpn	  = "Controller Raid NetRAID-4M Hewlett Packard"
perc2	= "Controller RAID PERC 2/3 Dell"
perc2gat = "Controller RAID PERC 2/3 Dell(Gatling)"

...

In older version in this point I have a Long list of SATA & IDE RAID Controller.

Could anybody help me!

[jkey]

Please post Your Last_Sessoin.ini as attachment

[vaxxo]

Please post Your Last_Sessoin.ini as attachment

Thanks jkey,

Here it is! Ultima_Sessione.ini "Last Session" in italian "Ultima Sessione"

[William_Syd]

XP Pro SP2 OEM.

I'm just adding Intel raid drivers and my txtsetup.sif is coming out smaller than it went in.

This in turn is causing a W2k RIS server setup to fail with a message "The data area passed to a system call is too small".

any ideas ?

Here is txtsetup.sif before nlite http://magicwilly.webhostingpal.com/nlitef...re/TXTSETUP.SIF

and after http://magicwilly.webhostingpal.com/nlitef...er/TXTSETUP.SIF

And a pic of my problem http://magicwilly.webhostingpal.com/nlitef...s/RIS_Error.png

Regards,

William.

Edited September 10, 2006 by William_Syd