I want to MAKE SURE that this box is not transmitting or recieving, anything.

Anyone know a way to clip a diode or something to disable the wireless part and still have the rest fuctional ??

I disabled the ssid but I see the WLAN light flash's with the WAN and LAN light when using the internet, I did remove the antenna too.........

Edited June 23, 200620 yr by EAT MY DUST

well u can enable mac address filtering and turn encryption on, that way its pretty much impossible to hack into

ya I got my MAC filter on too,and the encryption is on too, with a hex code and stuff, I just want to physically disable it, maybe by removing a diode or resistor on the circut board.

This thing gets hot as hell so it must be transmitting.

well i know for my netgear router, i have the option

" Enable Wireless Access Point"

if i uncheck this then it stops tranmitting.

you should have something similar to this

http://support.dlink.com/faq/view.asp?prod...%20DI-614+_revB

I have that disabled, but the WLAN light flash's like it's up to someting, it's not a regular beat, it mimmicks the other wan and lan idicators when downloading etc.

Also the DB power adjustments dont stay put, when I set it to 25% it goes right back to 100% when I come back

.Version 1.03

• Added WPA and WPA-PSK support

• Added Radio ON / OFF option on Wireless Page

• Modified the Time page - Adding Local Computer Time Option

maybe they didn't do a good job.....

CHECK THIS OUT

http://support.dlink.com/emulators/di514_revb/

All these setting's won't change they all revert back to default........only SSID broacast can be changed.

http://support.dlink.com/emulators/di514_r...dv_perform.html

wow had some funky stuff with my router.

It keeps resetting itself when I change certain sections, my back-ups were weak too, ended up resetting it and re-programming it all.......I think it's mad at me

Maybe reflashing the BIOS and clearing all settings to factory defaults might be a good idea. After that, you can go ahead and see if you can set your settings accordingly.

I reset the bios, seems ok for now.....