betamax Posted April 16, 2007 Share Posted April 16, 2007 A few questions:When you start an install with syspart and makelocalsource, does it leave the local source files on the drive after setup has completed? Where does it leave them?Does it set the registry values to point to the local source as the SourcePath, or does it still refer to the CD?After you run winnt32.exe from the PE environment and reboot (to start text setup from the HDD), do you need the CD anymore? Or can it be removed from the cd rom drive? Link to comment Share on other sites More sharing options...
TonyPE Posted April 16, 2007 Author Share Posted April 16, 2007 I tried your program and the only thing I had a problem with is that your program requires a OEMFilesPath= in the unattend where as MS seems to indicate its optional.Since my $OEM$ folders are under the /platform folder, I've never specified them with a OEMFilesPath=Otherwise, a nice program.Thank you, and you are correct. As a workaround, you can specify an empty folder for OEMFilesPath. I'll fix this in the next release. Link to comment Share on other sites More sharing options...
TonyPE Posted April 17, 2007 Author Share Posted April 17, 2007 When you start an install with syspart and makelocalsource, does it leave the local source files on the drive after setup has completed? Where does it leave them?No, just as Windows setup does not.Does it set the registry values to point to the local source as the SourcePath, or does it still refer to the CD?It still refers to the CD. I use a .REG file to change the source to a network share on my installations.After you run winnt32.exe from the PE environment and reboot (to start text setup from the HDD), do you need the CD anymore? Or can it be removed from the cd rom drive?Once the ManualWindowsSetup.EXE program exits, the CD is no longer needed and can be removed at any time thereafter.FYI, my scripts reboot the system after ManualWindowsSetup.EXE finishes. I use a bootable CD with the "Press any key to boot from CD" patch, so I don't need to be around to eject the disk. Link to comment Share on other sites More sharing options...
IISINF Posted September 21, 2007 Share Posted September 21, 2007 We are using theManualWindowsSetup.exe from Tony to run XP64bit from WINPE 2.0.It works like a charm but when we reboot the system the disk isn't bootable.Any suggestions?TIA,Martin Link to comment Share on other sites More sharing options...
gar123 Posted October 18, 2007 Share Posted October 18, 2007 maybe u need to run bootsect to apply switching between BOOTMGR and NTLDR if u are booting 2003 Link to comment Share on other sites More sharing options...
NYTAIceman Posted December 11, 2007 Share Posted December 11, 2007 Hi,i'm very interested about the solution to stage a 64bit Server with a 32bit PE Session.The solution from TonyPE with a compiled .exe seems to be a possible way, but i do like to have the source code, before i stage my servers with this tool. I've try to contact TonyPE but he does not answer me.Has anybody the sourcecode or the batchfiles (Before he has compiled as a native app)?Thank you very much!Greets Link to comment Share on other sites More sharing options...
killerb255 Posted December 14, 2007 Share Posted December 14, 2007 Just make an x64 version of WinPE 2.0 and install from it.Follow one of the tutorials within the forums, but use the AMD64 folders instead of the x86 folders.Also, if the OS won't boot after initial setup, then check this article out:http://support.microsoft.com/kb/931760You don't have to call Microsoft for the patch. Just edit your PE registry according to the article before using DISKPART to create your partitions. Link to comment Share on other sites More sharing options...
NYTAIceman Posted December 14, 2007 Share Posted December 14, 2007 Hi killerbi255,I'm sorry but you have not read my text... I need a solutions to stage a windows 64bit Version with a Windows PE 32bit Version.I can't work with a PE 64bit because the code of my other applications isn't 64bit ready.Windows PE 64 has no WOW64 on board, therefore I can't start my own applications.Ok, again:Has anybody the sourcecode of ManualWindowsSetup.exe or the batch files?Thanks again.Greets, Iceman Link to comment Share on other sites More sharing options...
jaclaz Posted December 14, 2007 Share Posted December 14, 2007 (edited) Hi killerbi255,I'm sorry but you have not read my text... I need a solutions to stage a windows 64bit Version with a Windows PE 32bit Version.I can't work with a PE 64bit because the code of my other applications isn't 64bit ready.Windows PE 64 has no WOW64 on board, therefore I can't start my own applications.Ok, again:Has anybody the sourcecode of ManualWindowsSetup.exe or the batch files?Thanks again.Greets, IcemanVersion 1 is here (not really "hidden" ) :http://home.woh.rr.com/pombo/tools/http://home.woh.rr.com/pombo/tools/ManualWindowsSetup1.zipBesides being compiled, version 2.0 coorected bugs of version 1.0, so, without TonyPE's support, you might need to directly correct them in the .wsh, if those bugs affect your particular setup.jaclaz Edited December 14, 2007 by jaclaz Link to comment Share on other sites More sharing options...
imalone Posted January 9, 2009 Share Posted January 9, 2009 Hey all, I know this is a very old post but I was wondering if anyone still has these files that TonyPE has mentioned, or whether anyone knows of anyway to initiate a 64bit Windows 2003 unattended build using BartPE. Link to comment Share on other sites More sharing options...
cdob Posted January 9, 2009 Share Posted January 9, 2009 @imaloneCompare:How to install an x64-based version of Windows Server 2003 by using an x86-based Windows Preinstallation Environmenthttp://support.microsoft.com/kb/925279/ Link to comment Share on other sites More sharing options...
imalone Posted January 10, 2009 Share Posted January 10, 2009 cdob, you are a genious! Thanks so much for pointing me in the right direction, I will give this a go and hopefully will work the way I hope. that way I wont have to scrap an entire automated build structure and start from scratch. once again Thanks! Link to comment Share on other sites More sharing options...
imalone Posted February 3, 2009 Share Posted February 3, 2009 So seeing cdob was a genius to solve my last 64 bit issue, heres yet another:Currently I am expanding on a automated O/S deployment tool inherited by another group at my company where the startup means to deploy is by using BartPE. I know this is a 32 bit preinstall and maybe a bit outdated but it's simple and easy to modify and in making long stories shirt, it runs quite nicely for what we need. Currently it deploys W2k, W2k3 x86 and x64, and 2k8 x86 with all needed apps and updates through specialized scripts. So now here is the dilema I am now faced with overcoming, the issue is with 2008 x64. I am able to start the setup and it will copy down and start the setup of all the needed files, but the issue is when it does it's reboot, it will reboot and display the following error:\boot\bcd 0xc000000fI know this probibly has to do with the fact that it was initaited from a 32bit preinstall and the boot records were set for 32bit and not the 64bit its trying to boot from. I have tried using MBRFIX but to no avail. I have also tried fixing it based on booting from the original DVD and doing the recovery option to automatically fix it. This does work but only for 1 reboot and the message is displayed again. Besides using the repair disk is not an option when doing the unattended build.Any suggestions at this point would be greatly appreciated. I really don't want to abandon our current BartPE setup as everything else is running nicely. Link to comment Share on other sites More sharing options...
Jazkal Posted February 3, 2009 Share Posted February 3, 2009 what command line did you use for the win2k8 x64 install? Link to comment Share on other sites More sharing options...
imalone Posted February 3, 2009 Share Posted February 3, 2009 Hey Jazkal,I called up the following command via batch script:z:\w2k8aiosp1\distribution\setup.exe /installfrom:z:w2k8aiosp1\distribution\sources\install.wim /unattended:z:\answerfiles\win2k8\2008std_64b.xmlI should mention that this command is based on me merging the 2 seperate disks (x86 and x64) together into one install.wimPreviuosly I called it up the same way I did with 2003 by the seperate O/S folders such as this:z:\w2k8std32sp1\setup.exe /installfrom:z:w2k8std64sp1\sources\install.wim /unattended:z:\answerfiles\win2k8_64\2008std_64b.xml Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now