sammycat Posted February 28, 2006 Posted February 28, 2006 I have managed to get the dual boot of Windows Vista and Windows XP working on my laptop. I used Ghost to create the ghost image successfully. However, when I try to load that image on to the same machine the machine can't boot into either operation system anymore. Has anyone tried this? I am wondering if it is because Vista is not supported under Ghost yet. Thanks.
jondercik Posted February 28, 2006 Posted February 28, 2006 Are you putting the installations in the same partitions?
sammycat Posted February 28, 2006 Author Posted February 28, 2006 Are you putting the installations in the same partitions?No. They are on separate partitions. I installed Windows XP first and then installed Vista on another partition.
jondercik Posted February 28, 2006 Posted February 28, 2006 When you restore them are you putting them in the same order?
sammycat Posted February 28, 2006 Author Posted February 28, 2006 When you restore them are you putting them in the same order?My ghost image is on the entire disk. I didn't do it on partitions. So when I restored the image I restored to the disk. I even tried to do it partition by partition but it failed. Thanks.
sammycat Posted February 28, 2006 Author Posted February 28, 2006 oddDid you try it in your environment and got it worked??
jondercik Posted February 28, 2006 Posted February 28, 2006 I use Acronis. It is much better. 100x easier to write to network and USB drives.Jim
fizban2 Posted February 28, 2006 Posted February 28, 2006 Sammycat, just download the WAIK and create a WIM of the drive, that should work much better for you
sammycat Posted March 9, 2006 Author Posted March 9, 2006 Sammycat, just download the WAIK and create a WIM of the drive, that should work much better for youThat's the next thing I am going to do - Create a WIM image. Have you done it in your test environment yet? We are looking into different deployment method. I don't think WDS can deploy the WIM image through the server..
fizban2 Posted March 9, 2006 Posted March 9, 2006 (edited) WDS can have 3 stages,legacy - Basically just a RIS server, using RIS setup and RIS prepMixed - RIS and WIM images booNative - WIM images only using WinPE 2.0 to booti have a native WDS server setup, working pretty nicely atm, still a little buggy but i like it, creating a new WIM image for our standard image today and will test to see how it does, was getting errors trying to autocreate computer accounts, but prestaging the accounts works fine. i'll post more as i work on it today Edited March 9, 2006 by fizban2
IcemanND Posted March 10, 2006 Posted March 10, 2006 can you be a little more specific on neither operaating system will boot. Error? Hangs with flashing cursor?Have you tried any switches like /IB to capture the entire boot record?WIM would probably be the best way to go.
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now