atakan_1907 Posted January 26, 2006 Posted January 26, 2006 i have a big trouble.like this:i bought a new hdd samsung hd080hj and i have asus p4v800-x board. it supports sata but when i plugged the hdd board cant find the device. i updated its bios ,enabled onboard sata rom ,installed xp on the hdd but now whn i started pc it cant find the device then i press restart then it find it on raidtool only but not on the bios. i cant stand that problemare there anyone can solve that?
ripken204 Posted January 26, 2006 Posted January 26, 2006 that hard drive is ultra ata, not serial ata. so it wont work.
atakan_1907 Posted January 26, 2006 Author Posted January 26, 2006 no it supports sata. i looked at the mainoard's cover
ripken204 Posted January 27, 2006 Posted January 27, 2006 the mainboard/motherboard does support sata, but the hard drive it uata, so it wont work
atakan_1907 Posted January 27, 2006 Author Posted January 27, 2006 so how can i solve that? any idea?
RJM Posted January 27, 2006 Posted January 27, 2006 (edited) Ripkin204, It Is a SATA hard drive. Storage Products > Hard Disk Drive > SpinPoint P Series HD080HJ SpinPoint P Series Next Generation of Interface The parallel interface, Ultra ATA, in most of today's desktop storage systems is now facing its limit. The Parallel ATA interface has been in use as the standard legacy storage device for individual users for over 17 years. Samsung has adopted the new interface, Serial ATA, and will continue to launch products with SATA interface for years to come. News Awards Technical Info About Our Division White Papers FAQ Troubleshooting Warranty User Guide Utilities Select Model [spinPointTSeries]HD300LDHD300LJHD400LDHD400LJ Features Specifications Specifications Drive Configuration Interface Serial AT A II Buffer DRAM Size+2 8 MB Bytes per Sector 512 Performance Specification Read Seek Time(typical) Track to Track 0.8 ms Average 8.9 ms Full Stroke 18.0 ms Average Latency 4.17 ms Rotational Speed 7,200 rpm Data Transfer Rate Media to/from Buffer (max.) 845 Mbits/s Buffer to/from Host(max.) 300Mbytes/sDrive Ready Time(typical) 7 secReliability Specification Non-recoverable Read Error 1 sector in 1014 bits MTBF 500,000 POH Start/Stop Cycles (Ambient) 50,000 Component Design Life 5 years Acoustic (Average Sound Power) Idle 2.5 Bel Random Read/Write 2.8 Bel Environmental Specification Temperature Operating 5 ~ 55°C Non-operating -40 ~70°C Thermal Gradient(max.) 20°C/hr Humidity (non-condensing) Operating 5 ~ 90 % Non-operating 5 ~ 95 % Linear Shock (1/2 sine pulse) Operating, 2ms 63 G Non-operating, 2ms 350 G Vibration (swept sine, 1 octave per minute)20 Linear Shock (1/2 sine pulse) Operating 5 ~ 21 Hz 0.034" (double amplitude) 21 ~ 300 Hz 1.5 Gp-p Non-operating 5 ~ 21 Hz 0.195" (double amplitude) 21 ~ 500 Hz 8 Gp-p Altitude (relative to sea level) Operating -1,000 to 10,000 feet Non-operating -1,000 to 40,000 feet Power Requirements Voltage 5V°±5% / 12V°±10% Spin Up Current (max.) 780 / 1900 mA Read/Write On-Track(typ.) 8.5 W Seek+2(typ.) 7.8 W IIdle(typ.) 7.5 W Standby(typ.) 0.9 W Sleep(typ.) 0.9 W Physical Dimension Height 1 inch Width 4 inch Depth 5.75 inches Weight 1.4 pounds Edited January 27, 2006 by RJM
nosepicker Posted January 27, 2006 Posted January 27, 2006 I had trouble with my Samsung SP2004C harddrive (SATA2) and Abit NF7-S rev.2 motherboard (SATA1) as well.This worked for me:1) On top of HD is a drawing of how to mount a jumper beside the SATA cable. In order to force HD to SATA1, just mount jumper.2) Only enable SATA controller in BIOS, not SATA RAID ROM.3) In BIOS i had to set SATA as a boot device, even though i only boot from another IDE HD.4) Format with something like "Paragon Partition Manager v7.0". This needs 1 hour.I dont know if this is logic but as i said, it worked for me...
ripken204 Posted January 28, 2006 Posted January 28, 2006 omg, sorry. i did see that page before and i guess that i read that 1st big paragraph and saw ultra ata and thats it. and you need to change the jumper to make it work for you.
atakan_1907 Posted January 28, 2006 Author Posted January 28, 2006 Ripkin204, It Is a SATA hard drive. Storage Products > Hard Disk Drive > SpinPoint P Series HD080HJ SpinPoint P Series Next Generation of Interface The parallel interface, Ultra ATA, in most of today's desktop storage systems is now facing its limit. The Parallel ATA interface has been in use as the standard legacy storage device for individual users for over 17 years. Samsung has adopted the new interface, Serial ATA, and will continue to launch products with SATA interface for years to come. News Awards Technical Info About Our Division White Papers FAQ Troubleshooting Warranty User Guide Utilities Select Model [spinPointTSeries]HD300LDHD300LJHD400LDHD400LJ Features Specifications Specifications Drive Configuration Interface Serial AT A II Buffer DRAM Size+2 8 MB Bytes per Sector 512 Performance Specification Read Seek Time(typical) Track to Track 0.8 ms Average 8.9 ms Full Stroke 18.0 ms Average Latency 4.17 ms Rotational Speed 7,200 rpm Data Transfer Rate Media to/from Buffer (max.) 845 Mbits/s Buffer to/from Host(max.) 300Mbytes/sDrive Ready Time(typical) 7 secReliability Specification Non-recoverable Read Error 1 sector in 1014 bits MTBF 500,000 POH Start/Stop Cycles (Ambient) 50,000 Component Design Life 5 years Acoustic (Average Sound Power) Idle 2.5 Bel Random Read/Write 2.8 Bel Environmental Specification Temperature Operating 5 ~ 55°C Non-operating -40 ~70°C Thermal Gradient(max.) 20°C/hr Humidity (non-condensing) Operating 5 ~ 90 % Non-operating 5 ~ 95 % Linear Shock (1/2 sine pulse) Operating, 2ms 63 G Non-operating, 2ms 350 G Vibration (swept sine, 1 octave per minute)20 Linear Shock (1/2 sine pulse) Operating 5 ~ 21 Hz 0.034" (double amplitude) 21 ~ 300 Hz 1.5 Gp-p Non-operating 5 ~ 21 Hz 0.195" (double amplitude) 21 ~ 500 Hz 8 Gp-p Altitude (relative to sea level) Operating -1,000 to 10,000 feet Non-operating -1,000 to 40,000 feet Power Requirements Voltage 5V°±5% / 12V°±10% Spin Up Current (max.) 780 / 1900 mA Read/Write On-Track(typ.) 8.5 W Seek+2(typ.) 7.8 W IIdle(typ.) 7.5 W Standby(typ.) 0.9 W Sleep(typ.) 0.9 W Physical Dimension Height 1 inch Width 4 inch Depth 5.75 inches Weight 1.4 poundsyou right its sata and you can find the motherboard at asus.com p4v800-x it supports sata too. but where is the problem. and ripken204 thank u for your support but i tried all combinations of jumper. and i think the jumper should not be attached. i am in fear. its possible that i recycle the pc
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now