How To Use CD/DVD Writer On Network?

[amit_talkin]

Anybody knows that how to use CD/DVD writer to write CD/DVD from a network pc????can this be done by mapping network drive???? how to do this ????

[thorus]

Just for read files from it it works.

To write it's not posible.I try but....

[tim]

Yes it is possible to write to a CD/DVD writer over a network.

You need an iSCSI Target software like StarWind from http://www.rocketdivision.com/

This runs on the machine with the CD/DVD drive to share it over the network.

Then you connect to the remote iSCSI share with an iSCSI Initiator.

You can use StarPort from http://www.rocketdivision.com/ .

There is also a free iSCSI Initiator from Microsoft here http://www.microsoft.com/downloads/details...&displaylang=en

The drive then appears as a local drive letter on the Initiator machine.

It can be used just like any local CD/DVD drive. I have done this a number of times without a problem.

You need to make sure there is enough network bandwidth to sustain a CD/DVD writing session!

Edited November 5, 2005 by tim

[chilifrei64]

Nero Does it

http://ww2.nero.com/nero6/en/neronet-prog.html

[amit_talkin]

thanks ppl....i m going to try NERONET ....may be...it will work for me!!! i will also try starwind then i will tell you which one is worked !!!