pcgirl Posted October 27, 2005 Share Posted October 27, 2005 Hello,I used setupmgr.exe in my WinXP cd and came up with a winnt.sif for unattend install. I only want TCP/IP protocol and do not want Client for MS Networks, File and Print Sharing and QoS Packet Scheduler yet these three still get installed automatically along with TCP/IP. Below is the section of my winnt.sif where I believe it's specifying only TCP/IP:[identification] JoinWorkgroup=WORKGROUP[Networking] InstallDefaultComponents=No[NetAdapters] Adapter1=params.Adapter1[params.Adapter1] INFID=*[NetProtocols] MS_TCPIP=params.MS_TCPIP[params.MS_TCPIP] DNS=Yes UseDomainNameDevolution=No EnableLMHosts=Yes AdapterSections=params.MS_TCPIP.Adapter1[params.MS_TCPIP.Adapter1] SpecificTo=Adapter1 DHCP=Yes WINS=No NetBIOSOptions=0What am I doing wrong or what else can I do to correct this? Link to comment Share on other sites More sharing options...
Mercury_22 Posted October 27, 2005 Share Posted October 27, 2005 (edited) Try only[Networking] InstallDefaultComponents=No[NetProtocols] MS_TCPIP=params.MS_TCPIPand let me know if it works! Edited October 27, 2005 by Mercury_22 Link to comment Share on other sites More sharing options...
pcgirl Posted November 1, 2005 Author Share Posted November 1, 2005 Try only[Networking] InstallDefaultComponents=No[NetProtocols] MS_TCPIP=params.MS_TCPIPand let me know if it works!I tried your suggestion and it still didn't work. I also tried using just:[Networking] InstallDefaultComponents=Noand still no luck. Client for Microsoft Networks, File and Printer Sharing and QoS are still installed along w/ TCP/IP. Looks like it's still getting forced somehow during the install . Any other ideas? Link to comment Share on other sites More sharing options...
cluberti Posted November 1, 2005 Share Posted November 1, 2005 You need to make sure that the following exists in your WINNT.SIF file:[Components] NetOc = OnAnd then the following will kill QOS:[NetOptionalComponents] Beacon=0Otherwise, what you have below is correct and should work properly. Link to comment Share on other sites More sharing options...
Oleg_II Posted May 9, 2008 Share Posted May 9, 2008 Old thread Here's my WINNT.SIF:[Data]AutomaticUpdates="No"Autopartition=1MsDosInitiated=1UnattendedInstall="Yes"[Unattended]UnattendMode=FullUnattendedUnattendSwitch="Yes"OemPreinstall="Yes"OemSkipEula="Yes"ProgramFilesDir="\Appz"CommonProgramFilesDir="\Appz\Common"ComputerType="Standard PC", RetailFileSystem=LeaveAloneWaitForReboot=NoDriverSigningPolicy = IgnoreNonDriverSigningPolicy=IgnoreHibernation = NoOemPnPDriversPath="\Temp\drivers"[GuiUnattended]AdminPassword=*AutoLogon=YesOEMSkipRegional=1OEMSkipWelcome=1ProfilesDir="%SYSTEMDRIVE%\Profiles"TimeZone=210[UserData]ComputerName=***FullName="***"OrgName="***"ProductId="***"ProductKey="***"[Shell]DefaultThemesOff="Yes"DefaultStartPanelOff="Yes"[b][Networking]InstallDefaultComponents=No[NetAdapters]Adapter1=params.Adapter1[params.Adapter1]INFID=*[NetProtocols]MS_TCPIP=params.MS_TCPIP[params.MS_TCPIP]DNS=YesUseDomainNameDevolution=NoEnableLMHosts=YesAdapterSections=params.MS_TCPIP.Adapter1[params.MS_TCPIP.Adapter1]SpecificTo=Adapter1DHCP=YesWINS=NoNetBIOSOptions=0[/b][b][NetOptionalComponents]Beacon=0[/b][WindowsFirewall]Profiles = WindowsFirewall.TurnOffFirewall[WindowsFirewall.TurnOffFirewall]Mode = 0[Components]AccessOpt = OffAppsrv_console = OffAspnet = OffBitsServerExtensionsISAPI = OffBitsServerExtensionsManager = OffCalc = OnCertsrv = OffCertsrv_client = OffCertsrv_server = OffCharmap = OffChat = OffClipbook = OffCluster = OffComplusnetwork = OffDeskpaper = OffDialer = OffDtcnetwork = OffFax = OffFp_extensions = OffFp_vdir_deploy = OffFreecell = OffHearts = OffHypertrm = OffIEAccess = OffIEHardenAdmin = OffIEHardenUser = OffIis_asp = OffIis_common = OffIis_ftp = OffIis_inetmgr = OffIis_internetdataconnector = OffIis_nntp = OffIis_serversideincludes = OffIis_smtp = OffIis_webdav = OffIis_www = OffIndexsrv_system = OffInetprint = OffLicenseserver = OffMedia_clips = OffMedia_utopia = OffMinesweeper = OffMousepoint = OffMsmq_ADIntegrated = OffMsmq_Core = OffMsmq_HTTPSupport = OffMsmq_LocalStorage = OffMsmq_MQDSService = OffMsmq_RoutingSupport = OffMsmq_TriggersService = OffMsnexplr = OffMswordpad = OffNetcis = Off[b]Netoc = On[/b]Objectpkg = OffOEAccess = OffPaint = OffPinball = OffPop3Admin = OffPop3Service = OffPop3Srv = OffRec = OffReminst = OffRootautoupdate = OffRstorage = OffSakit_web = OffSolitaire = OffSpider = OffTemplates = OffTerminalServer = OffTSWebClient = OffVol = OnWbemCrrl = OffWbemFwrd = OffWbemMSI = OffWMAccess = OffWMPOCM = OffWms = OffWms_admin_asp = OffWms_admin_mmc = OffWms_isapi = OffWms_server = OffZonegames = OffEverything should be working but... Client for MS Networks, File and Print Sharing and QoS Packet Scheduler are still there after installation I'd even get rid of TCP/IP protocol (temporary of course, only during setup if it can help not installing other things. Link to comment Share on other sites More sharing options...
Oleg_II Posted May 9, 2008 Share Posted May 9, 2008 Just found: I miss this section[identification]JoinWorkgroup=WORKGROUPCould it be the problem? Link to comment Share on other sites More sharing options...
Oleg_II Posted May 9, 2008 Share Posted May 9, 2008 Just found: I miss this section[identification]JoinWorkgroup=WORKGROUPCould it be the problem?Nope... Added Identification section and deleted TCP/IP info (only InstallDefaultComponents=No is left, decided not to install at all) - no go, all default protocols-clients-services art still there Link to comment Share on other sites More sharing options...
cluberti Posted May 9, 2008 Share Posted May 9, 2008 Unless you're installing from a DOS boot disk, you need to make sure MsDosInitiated = 0, not 1, for starters. Also, you do not need both a ProductKey and ProductID field, one or the other will do (I use ProductKey, but that's just preference). Also, considering that your network section is just providing defaults, try just using the following:[Networking] InstallDefaultComponents = YES[NetServices] MS_Server=params.MS_PSched[NetOptionalComponents] Beacon = 0 Link to comment Share on other sites More sharing options...
Oleg_II Posted May 9, 2008 Share Posted May 9, 2008 (edited) clubertiThanks for your advices I'll try them right away.But as forAlso, considering that your network section is just providing defaults, try just using the following:I don't quite understand... I contrary don't want to install default components, I'd like to install only TCP/IP protocol or even don't install anything default (TCP/IP protocol, Client for MS Networks, File and Print Sharing and QoS Packet Scheduler).Sorry for ignorance but I don't also get if this[NetServices] MS_Server=params.MS_PSchedhelps me to get rid of QoS Packet Scheduler? Cause I don't need it.I specified "InstallDefaultComponents=no" and only need TCP/IP protocol. It doesn't possible at all?PS I install from the hard disk (from previously created share). Edited May 9, 2008 by Oleg_II Link to comment Share on other sites More sharing options...
Oleg_II Posted May 9, 2008 Share Posted May 9, 2008 clubertiThis seems working:[NetServices]MS_Server=params.MS_PSchedAt least I have only 3 items left in Connection Properties:- Client for Microsoft Networks- File and Printing Sharing for Microsoft Networks- Internet Protocol (TCP/IP)Now the question is how to get rid of them (maybe except TCP/IP protocol but it can be installed later too anyway). Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now