Ceyarrecks Posted February 21, 2005 Share Posted February 21, 2005 I am using Win2ksp4 Advanced Server on a pre-built intel 667MHz 256ram system.I recently installed the Silicon Image Inc (Was: CMD Technology Inc) SiI 0680 (Was: PCI-0680) Ultra ATA133 EIDE Controller (purchase was without drivers/manual)I used Sandra to determine the exact type of device and proceeded to download and install the drivers (SiI PCI-680 ‘base driver’ Version 1.0.0.12 Release.) dated 1/24/2005 from SI's driver site. I then also installed SiI0680_x86_InstallSiICfg-1205.zip (which really did not provide me with any useful information.)After restarting the system, I received the following errors:Event Type: ErrorEvent Source: Service Control ManagerEvent Category: NoneEvent ID: 7026Date: 19-Feb-05Time: 10:25:20User: N/AComputer: HOME-12Description:The following boot-start or system-start driver(s) failed to load: Pnp680 ++++++ (also,...)Event Type: ErrorEvent Source: Pnp680Event Category: NoneEvent ID: 4Date: 19-Feb-05Time: 10:24:37User: N/AComputer: HOME-12Description:Driver detected an internal error in its data structures for . Data:0000: 00 00 00 00 01 00 56 00 ......V.0008: 00 00 00 00 04 00 04 c0 .......À0010: 08 00 00 00 c0 00 00 c0 ....À..À0018: 00 00 00 00 00 00 00 00 ........0020: 00 00 00 00 00 00 00 00 ........+++++++++++++++and under Device Manager, the device is shown with a yellow exclaimation point (!) wth the following error:This device cannot start. (Code 10)Click Troubleshooter to start the troubleshooter for this device.___________Any help in this that will allow me to remedy this situation and begin useing this device (and subsequently, the drives connected to it) would be greatly appreciated. (also to be noted, SpinRite 6.0, a DOS based harddrive maintenance tool isable to read the drive(s) )Thanks.CAH Link to comment Share on other sites More sharing options...
Marsden Posted February 21, 2005 Share Posted February 21, 2005 Get the right drivers... it will not work until you do. Link to comment Share on other sites More sharing options...
trickytwista Posted February 21, 2005 Share Posted February 21, 2005 i use same card (the 0680 and its a good toy....if fail 2 find right driver i can prob sort it 4 ya since i have driver cd...must be a newer driver 4 it somewhere but has i had nps with it i never updated...cheers.....ok here we go i added drivers in rar file..let me know how u go on Link to comment Share on other sites More sharing options...
trickytwista Posted February 21, 2005 Share Posted February 21, 2005 seems could only post 1 file at a time so heres other 1...cheers Link to comment Share on other sites More sharing options...
Ceyarrecks Posted February 22, 2005 Author Share Posted February 22, 2005 i use same card (the 0680 and its a good toy....if fail 2 find right driver i can prob sort it 4 ya since i have driver cd...must be a newer driver 4 it somewhere but has i had nps with it i never updated...cheers.....ok here we go i added drivers in rar file..let me know how u go on<{POST_SNAPBACK}>thank you kindly for your timejust tried to open the rar file and received this error: 1 0680a_idrv_10012.rar: Unknown method in 0680a_idrv-10012\680 Dvr Rel Notes.doc 2 0680a_idrv_10012.rar: Unknown method in 0680a_idrv-10012\Driver000\pnp680.cat 3 0680a_idrv_10012.rar: The file "0680a_idrv-10012\Driver000" header is corrupt 4 0680a_idrv_10012.rar: Unknown method in 0680a_idrv-10012\DriverLanguageMap.xml 5 0680a_idrv_10012.rar: Unknown method in 0680a_idrv-10012\pnp680.cat 6 0680a_idrv_10012.rar: Unknown method in 0680a_idrv-10012\Pnp680.mpd 7 0680a_idrv_10012.rar: Unknown method in 0680a_idrv-10012\Pnp680.sys 8 0680a_idrv_10012.rar: Unknown method in 0680a_idrv-10012\readme.txt 9 0680a_idrv_10012.rar: Unknown method in 0680a_idrv-10012\SI680.inf 10 0680a_idrv_10012.rar: Unknown method in 0680a_idrv-10012\SIISUPP.VXD 11 0680a_idrv_10012.rar: Unknown method in 0680a_idrv-10012\SilSupp.cpl 12 0680a_idrv_10012.rar: Unknown method in 0680a_idrv-10012\TxtSetup.oem 13 0680a_idrv_10012.rar: The file "0680a_idrv-10012" header is corruptlet me try other suggested download, will post of my results.Thank you again all Link to comment Share on other sites More sharing options...
Ceyarrecks Posted February 22, 2005 Author Share Posted February 22, 2005 seems could only post 1 file at a time so heres other 1...cheers<{POST_SNAPBACK}>ack! in this download and attempted extraction,... 1 0680a_rdrv1017_raid_drv_.rar: Unknown method in 0680a_rdrv1017(raid drv)\680_RAIDlogo_drv\OS Drivers\DriverLanguageMap.xml 2 0680a_rdrv1017_raid_drv_.rar: Unknown method in 0680a_rdrv1017(raid drv)\680_RAIDlogo_drv\OS Drivers\pnp680r.cat 3 0680a_rdrv1017_raid_drv_.rar: Unknown method in 0680a_rdrv1017(raid drv)\680_RAIDlogo_drv\OS Drivers\PnP680r.mpd 4 0680a_rdrv1017_raid_drv_.rar: Unknown method in 0680a_rdrv1017(raid drv)\680_RAIDlogo_drv\OS Drivers\PnP680r.sys 5 0680a_rdrv1017_raid_drv_.rar: Unknown method in 0680a_rdrv1017(raid drv)\680_RAIDlogo_drv\OS Drivers\readme.txt 6 0680a_rdrv1017_raid_drv_.rar: Unknown method in 0680a_rdrv1017(raid drv)\680_RAIDlogo_drv\OS Drivers\SiI680r.inf 7 0680a_rdrv1017_raid_drv_.rar: Unknown method in 0680a_rdrv1017(raid drv)\680_RAIDlogo_drv\OS Drivers\SIISUPP.VXD 8 0680a_rdrv1017_raid_drv_.rar: Unknown method in 0680a_rdrv1017(raid drv)\680_RAIDlogo_drv\OS Drivers\Software Release Notes.doc 9 0680a_rdrv1017_raid_drv_.rar: Unknown method in 0680a_rdrv1017(raid drv)\680_RAIDlogo_drv\OS Drivers\TxtSetup.oem 10 0680a_rdrv1017_raid_drv_.rar: The file "0680a_rdrv1017(raid drv)\680_RAIDlogo_drv\OS Drivers" header is corrupt 11 0680a_rdrv1017_raid_drv_.rar: The file "0680a_rdrv1017(raid drv)\680_RAIDlogo_drv" header is corrupt 12 0680a_rdrv1017_raid_drv_.rar: The file "0680a_rdrv1017(raid drv)" header is corrupt Link to comment Share on other sites More sharing options...
trickytwista Posted February 22, 2005 Share Posted February 22, 2005 strange..i just downloaded them off here again after posting them and they extracted fine..dunno if its something 2 do with winrar version u using?? i is usin winrar 3.41 Link to comment Share on other sites More sharing options...
Ceyarrecks Posted February 22, 2005 Author Share Posted February 22, 2005 my good ol' purchased version of 2.71which would explain why I could not open them let me see if I can download a shareware version,... Link to comment Share on other sites More sharing options...
Ceyarrecks Posted February 22, 2005 Author Share Posted February 22, 2005 after Uninstalling previous driver, and Scanning for HW changes, put windows to specify location, and attempted to use the expanded 0680a_idrv_10012.rar, windows states "unable to locate drivers for this device"heh, attempting next version,... Link to comment Share on other sites More sharing options...
Ceyarrecks Posted February 22, 2005 Author Share Posted February 22, 2005 wooHOO!progress!the SiiCFG for Medley after reboot can now read the card and drives, which it states is now doing a rebuild (? is this normal)though Disk Management states "Disk 0" is unreadable,....will come back later to see if "rebuild" completion has made any changes.Thank you so much for the assistance here, this means alot!CAH Link to comment Share on other sites More sharing options...
Ceyarrecks Posted February 22, 2005 Author Share Posted February 22, 2005 hmm, well, after SiiCFG for Medley stated complted and a reboot, Disk Management still states Disk 0 (SiiG card w/ 2 maxtor 40GB-mirrored) is unreadable. as well as it does not show up with the rest of the HDD'sthese drives were previously used under windows as mirrors, and do stil have data on them. Am I to understand they have to be reformatted since being on ctrl'r card now? or is something still requiring config/setup? do I have to revert it back to a Basic disk (previously Dynamic for mirroring under windows)Thanks again Link to comment Share on other sites More sharing options...
Ceyarrecks Posted February 23, 2005 Author Share Posted February 23, 2005 in dealing with this Sii 0680 controller card,....Am I to understand the HDD have to be reformatted since being on ctrl'r card now? or is something still requiring config/setup? or do I have to revert it back to a Basic disk (previously Dynamic for mirroring under windows)*OR*can the data already on the drives be salvaged>? Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now