$WIN_NT$.~BT or $WIN_NT$.~LS?

[MarcL]

I am installing LSI U320 drivers using the method discribed in http://greenmachine.msfnhosting.com/READING/addraid.htm

My process is to kick the install off from DOS using the winnt.exe /U /S command.

this copies all of the needed files to the target drive, and reboots.

After the reboot, I get an error that the symmpi.sys file is missing.

The file is located in $WIN_NT$.~LS, if I manualy copy it to $WIN_NT$.~BT then all is fine.

What INF file contains the information on where "winnt.exe" copies the file to?

Thanks.

[Corvettaholic]

I believe txtsetup.sif is what you are looking for.

Check out this link:

http://www.mail-archive.com/unattended-inf...t/msg00107.html

Could be really useful, because they are also using symmpi.sys and it goes into great detail all the steps taken to fix the problem.

[MarcL]

That article is interesting, but is not using the same method I did to add the SCSI drivers.

My txtsetup.sif file has the following:

symc810.sys  = 1,,,,,,4_,4,1,,,1,4

symc8xx.sys  = 1,,,,,,4_,4,1,,,1,4

symmpi.sys = 1,,,,,,4_,4,1,,,1,4

symc810.sys and symc8xx.sys both end up in the $WIN_NT$.~BT directory.. Why does symmpi.sys end up in $WIN_NT$.~LS?

[MarcL]

Problem SOLVED!

I needed to also add the file name to the [FloppyFiles.2] section of dosnet.inf