noddy Posted August 7, 2009 Share Posted August 7, 2009 HI ALLI am rather new to this siteI have a ASUS AV8 which I am having problems with I bought a New XP Pro with SP2 on it in the hope to resolve not seeing the 1 TB WD GREEN HDDAs it happens I have pulling off the Drivers put on to a floppy as it only wants to see a "A DRIVE" to get to see the full 1TB but then when I have done the F6 for RAID drivers etc it does it's bit then I see the drive continue then I get VIASRAID.SYS could not be copied. SHOUT! so then I googled to find to slipstreaming it allI copied the XP on to driveI then copied the viapdsk.sy_ & viasraid.sy_ to the I386 folderI edited the TXTSETUP.SIF accordinglyNow is that all I need to do or are the other drivers required?Also how hard is it to add SP3 to the disc ? So that's all done. Any other advise welcome little disappointed that the NEW Disc did not see it.Many thanks Noddy Link to comment Share on other sites More sharing options...
kevin8402 Posted September 10, 2009 Share Posted September 10, 2009 (edited) Hi,Here is a way slipstream VIA SerialATA drivers easy into WinXP I386 folder. Download attached file, add few lines from Info.txt and copy sys_ files in I386 folder, and that is that.MillanSomeone give this man an award. This was my third try to slipstream drivers to an XP install disk and it worked. Much much thanks, GDragon.Edit: For anyone out there doing research, I used these drivers to successfully get Windows XP to find a SATA drive on a Soyo Dragon Plus KT600 v2 motherboard (which uses the VIA KT600 chipset). Edited September 10, 2009 by kevin8402 Link to comment Share on other sites More sharing options...
faizali1 Posted October 8, 2009 Share Posted October 8, 2009 (edited) omg thank you GDragoni wasted about 4 disc so far tryin to get this driver to work . one try your way an worked instantly . thank you so much.also i was using the same VIA kt600 chipset on an Epox board (cant get any dls to dl off there site thou) Edited October 8, 2009 by faizali1 Link to comment Share on other sites More sharing options...
waleedst Posted June 15, 2010 Share Posted June 15, 2010 hi can u get me sata driv for dell server for win2003 server 64 Link to comment Share on other sites More sharing options...
jmnew51 Posted June 21, 2010 Share Posted June 21, 2010 Well I copied all the code just the way gdragon said and now when I put the startup disc that I burned it starts copying the drivers files, then it goes to "Starting Windows" then I get the BSOD that says "Unmountable Drive" with the following code ***STOP: 0x000000ED,(0x889AB030, 0xC0000304,0x00000000, 0x00000000).What am I doing wrong?Somebody please help me. I've been wrestling with trying to get the drivers recognized at setup so I can install the VIA Raid drivers necessary to install windows on my SATA drives.Thanx Jim Link to comment Share on other sites More sharing options...
vijay123 Posted June 22, 2010 Share Posted June 22, 2010 copy from info.text to where, where should i copy these lines kindly let me know Link to comment Share on other sites More sharing options...
jmnew51 Posted June 22, 2010 Share Posted June 22, 2010 You have to copy them to the TXTSETUP.SIF folder in the i386 folder in the copy of win xp the you copied to your hdd.Jim Link to comment Share on other sites More sharing options...
rikyy Posted July 30, 2010 Share Posted July 30, 2010 HiCan somebody please help,Please bear in mind i am a complete computer novice and am tring to install Windows server 2003 std edition on a Dell Vostro 430. The computer has two Sata drives in it setup up as a Raid 1 system.I have understood quite a bit of this thread regarding editing the txtsetup.sif file etc and have used the nLite sotware to create the disc but am still having problems.Can anybody please helpThanks Link to comment Share on other sites More sharing options...
rubinostattooing Posted April 16, 2011 Share Posted April 16, 2011 Hi,Here is a way slipstream VIA SerialATA drivers easy into WinXP I386 folder. Download attached file, add few lines from Info.txt and copy sys_ files in I386 folder, and that is that.Millan hi, sorry to bug u. I know ur totally busy. I understand how 2 copy files to 1386 folder. but where do i add the lines from info.txt? im so tired of not being able to use my 500 gbt hardrive the right way. plz help. thanx Brian from Rubinos Tattooing(: Link to comment Share on other sites More sharing options...
rubinostattooing Posted April 16, 2011 Share Posted April 16, 2011 hi, sorry to bug u. I know ur totally busy. I understand how 2 copy files to 1386 folder. but where do i add the lines from info.txt? im so tired of not being able to use my 500 gbt hardrive the right way. plz help. thanxBrian from Rubinos Tattooing(: Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now