Wedge1 Posted October 25, 2004 Share Posted October 25, 2004 I am trying to do this with XP Home + SP1 slipstreamed. I'm not sure if I am making an error or if the Unattended Guide was strictly written for SP2 and will not work with SP1.[Data] AutoPartition=0 MsDosInitiated="0" UnattendedInstall="Yes"[Unattended] UnattendMode=FullUnattended OemSkipEula=Yes OemPreinstall=Yes TargetPath=\WINDOWS UnattendSwitch="yes" WaitForReboot="No" DriverSigningPolicy=Ignore OemPnPDriversPath="Drivers\000_chipset;Drivers\001_network;Drivers\002_graphics;Drivers\003_mouse"[GuiUnattended] AdminPassword=* EncryptedAdminPassword=NO OEMSkipRegional=1 TimeZone=20 OemSkipWelcome=1[UserData] ProductID=XXXXX-XXXXX-XXXXX-XXXXX-XXXXX FullName="Wedge1" OrgName="none" ComputerName=performance1300[Display] BitsPerPel=32 Xresolution=1152 YResolution=864 Vrefresh=85[TapiLocation] CountryCode=1 Dialing=Tone[Identification] JoinWorkgroup=WORKGROUP[Networking] InstallDefaultComponents=Yes[Components] msmsgs=off msnexplr=off freecell=off hearts=off minesweeper=off pinball=off spider=off zonegames=off [GuiRunOnce] %systemdrive%\install\batch_file1.cmd Link to comment Share on other sites More sharing options...
BrandonS_Mil Posted October 25, 2004 Share Posted October 25, 2004 the only thing i see is that you don't have the ;SetupMgrTag[Data]Listed at the top.Hope this helps Link to comment Share on other sites More sharing options...
Astalavista Posted October 25, 2004 Share Posted October 25, 2004 the guide actually works on xp, or sp1 or sp2 Link to comment Share on other sites More sharing options...
Wedge1 Posted October 26, 2004 Author Share Posted October 26, 2004 I should be banned. Here's why:I have been editing the winnt.sif then running VMware. The problem is that I was was editing the XPCD but not creating a new ISO; hence, I was running an emulation on the same image, over and over.... Ok, so now I have successfully ran an unattended installation but I had a few problems with some unattended apps. For a couple of them, the path was wrong and I was able to spot and correct that. But there were others that had problems. Is there a log that I might view to help sort this out?I recall CDex 1.51 asking for a prompt, as well as SpyBot. I'll search for those switches but if anybody knows them right off, please be so kind as to post. Link to comment Share on other sites More sharing options...
Wedge1 Posted October 26, 2004 Author Share Posted October 26, 2004 Bump for my last question:Is there a log that I might view to help sort this out? Link to comment Share on other sites More sharing options...
yoz7120 Posted October 27, 2004 Share Posted October 27, 2004 wedge1, for CDex go to CDex info and get the AutoIT file. For Spybot I use the following in my RunOnceEx. REG ADD %KEY%\016 /VE /D "Spybot Search and Destroy v1.3" /fREG ADD %KEY%\016 /V 1 /D "%CDROM%\Software\Spybot\Spybotsearch.exe /LOADINF=%CDROM%\Software\Spybot\Spybot.inf /VERYSILENT /SP-" /fIf you get stuck use the Search facility for hunting down the switches Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now